#include "ao.h"
uint8_t ao_btm_running;
-uint8_t ao_btm_stdio;
+int8_t ao_btm_stdio;
__xdata uint8_t ao_btm_connected;
uint8_t ao_btm_chat;
__xdata char ao_btm_buffer[1024];
int ao_btm_ptr;
+char ao_btm_dir;
+
+uint8_t ao_btm_send_chars = 0;
+
+void
+ao_btm_putchar(char c);
+
+static void
+ao_btm_add_char(char c)
+{
+ if (ao_btm_ptr < sizeof (ao_btm_buffer))
+ ao_btm_buffer[ao_btm_ptr++] = c;
+}
+
+static void
+ao_btm_log_char(char c, char dir)
+{
+ if (dir != ao_btm_dir) {
+ ao_btm_add_char(dir);
+ ao_btm_dir = dir;
+ }
+ ao_btm_add_char(c);
+}
+
+static void
+ao_btm_log_out_char(char c)
+{
+ ao_btm_log_char(c, '>');
+}
+
+static void
+ao_btm_log_in_char(char c)
+{
+ ao_btm_log_char(c, '<');
+}
#define AO_BTM_MAX_REPLY 16
__xdata char ao_btm_reply[AO_BTM_MAX_REPLY];
for (;;) {
while ((c = ao_serial_pollchar()) != AO_READ_AGAIN) {
+ ao_btm_log_in_char(c);
if (ao_btm_reply_len < sizeof (ao_btm_reply))
ao_btm_reply[ao_btm_reply_len++] = c;
- if (ao_btm_ptr < sizeof (ao_btm_buffer))
- ao_btm_buffer[ao_btm_ptr++] = c;
if (c == '\r' || c == '\n')
goto done;
}
uint8_t
ao_cmd_filter(void)
{
+ if (ao_cur_stdio != ao_btm_stdio)
+ return 0;
ao_cmd_lex();
while (ao_cmd_lex_c != '\n') {
- if (ao_match_word("CONNECT")) {
- ao_btm_connected = 1;
- ao_btm_echo(1);
- ao_wakeup(&ao_btm_connected);
+ if (ao_match_word("CONNECT"))
return 1;
- }
- if (ao_match_word("DISCONNECT")) {
- ao_btm_connected = 0;
- ao_btm_echo(0);
- ao_wakeup(&ao_btm_connected);
+ if (ao_match_word("DISCONNECT"))
return 1;
- }
if (ao_match_word("ERROR"))
return 1;
if (ao_match_word("OK"))
return AO_READ_AGAIN;
c = ao_serial_pollchar();
if (c != AO_READ_AGAIN)
- if (ao_btm_ptr < sizeof (ao_btm_buffer))
- ao_btm_buffer[ao_btm_ptr++] = c;
+ ao_btm_log_in_char(c);
return c;
}
+void
+ao_btm_putchar(char c)
+{
+ if (!ao_btm_send_chars) {
+ ao_btm_log_out_char(c);
+ ao_serial_putchar(c);
+ }
+}
+
+void
+ao_btm_stdio_putchar(char c) {
+ if (ao_btm_connected)
+ ao_btm_putchar(c);
+}
+
/*
* Wait for the bluetooth device to return
* status from the previously executed command
{
for (;;) {
ao_btm_get_line();
- if (!strcmp(ao_btm_reply, "OK"))
+ if (!strncmp(ao_btm_reply, "OK", 2))
return 1;
- if (!strcmp(ao_btm_reply, "ERROR"))
+ if (!strncmp(ao_btm_reply, "ERROR", 5))
return -1;
if (ao_btm_reply[0] == '\0')
return 0;
}
void
+ao_btm_string(__code char *cmd)
+{
+ char c;
+
+ while (c = *cmd++)
+ ao_btm_putchar(c);
+}
+
+uint8_t
ao_btm_cmd(__code char *cmd)
{
- ao_cur_stdio = ao_btm_stdio;
- printf(cmd);
- ao_btm_wait_reply();
+ ao_btm_drain();
+ ao_btm_string(cmd);
+ return ao_btm_wait_reply();
+}
+
+uint8_t
+ao_btm_set_name(void)
+{
+ char sn[7];
+ char *s = sn + 7;
+ char c;
+ int n;
+ ao_btm_string("ATN=TeleBT-");
+ *--s = '\0';
+ n = ao_serial_number;
+ do {
+ *--s = '0' + n % 10;
+ } while (n /= 10);
+ while ((c = *s++))
+ ao_btm_putchar(c);
+ return ao_btm_wait_reply();
}
+uint8_t
+ao_btm_try_speed(uint8_t speed)
+{
+ ao_serial_set_speed(speed);
+ ao_btm_drain();
+ (void) ao_btm_cmd("\rATE0\rATQ0\r");
+ if (ao_btm_cmd("AT\r") == 1)
+ return 1;
+ return 0;
+}
/*
* A thread to initialize the bluetooth device and
* hang around to blink the LED when connected
void
ao_btm(void)
{
- ao_serial_set_speed(AO_SERIAL_SPEED_19200);
ao_add_stdio(ao_btm_pollchar,
- ao_serial_putchar,
+ ao_btm_stdio_putchar,
NULL);
ao_btm_stdio = ao_num_stdios - 1;
- ao_cur_stdio = ao_btm_stdio;
ao_btm_echo(0);
- ao_btm_drain();
- ao_delay(AO_SEC_TO_TICKS(1));
- printf("+++");
- ao_btm_drain();
- ao_delay(AO_SEC_TO_TICKS(1));
- printf("\r");
- ao_btm_drain();
- ao_btm_cmd("ATQ0\r");
+
+ /*
+ * The first time we connect, the BTM-180 comes up at 19200 baud.
+ * After that, it will remember and come up at 57600 baud. So, see
+ * if it is already running at 57600 baud, and if that doesn't work
+ * then tell it to switch to 57600 from 19200 baud.
+ */
+ while (!ao_btm_try_speed(AO_SERIAL_SPEED_57600)) {
+ if (ao_btm_try_speed(AO_SERIAL_SPEED_19200))
+ ao_btm_cmd("ATL4\r");
+ ao_delay(AO_SEC_TO_TICKS(1));
+ }
+
+ /* Disable echo */
ao_btm_cmd("ATE0\r");
- ao_btm_cmd("ATH\r");
- ao_delay(AO_SEC_TO_TICKS(1));
- ao_btm_cmd("ATC0\r");
- ao_btm_cmd("ATL4\r");
- ao_serial_set_speed(AO_SERIAL_SPEED_57600);
- ao_btm_drain();
- printf("ATN=TeleBT-%d\r", ao_serial_number);
- ao_btm_wait_reply();
+
+ /* Enable flow control */
+ ao_btm_cmd("ATC1\r");
+
+ /* Set the reported name to something we can find on the host */
+ ao_btm_set_name();
+
+ /* Turn off status reporting */
+ ao_btm_cmd("ATQ1\r");
+
ao_btm_running = 1;
for (;;) {
while (!ao_btm_connected && !ao_btm_chat)
while (ao_btm_chat) {
char c;
c = ao_serial_pollchar();
- if (c != AO_READ_AGAIN)
+ if (c != AO_READ_AGAIN) {
+ ao_btm_log_in_char(c);
ao_usb_putchar(c);
- else {
+ } else {
ao_usb_flush();
ao_sleep(&ao_usart1_rx_fifo);
}
ao_usb_flush();
while ((c = ao_usb_getchar()) != '~') {
if (c == '\n') c = '\r';
- ao_serial_putchar(c);
+ ao_btm_putchar(c);
}
ao_btm_chat = 0;
while (!ao_btm_running) {
ao_btm_dump(void)
{
int i;
+ char c;
- for (i = 0; i < ao_btm_ptr; i++)
- putchar(ao_btm_buffer[i]);
+ for (i = 0; i < ao_btm_ptr; i++) {
+ c = ao_btm_buffer[i];
+ if (c < ' ' && c != '\n')
+ printf("\\%03o", ((int) c) & 0xff);
+ else
+ putchar(ao_btm_buffer[i]);
+ }
putchar('\n');
}
+static void
+ao_btm_speed(void)
+{
+ ao_cmd_decimal();
+ if (ao_cmd_lex_u32 == 57600)
+ ao_serial_set_speed(AO_SERIAL_SPEED_57600);
+ else if (ao_cmd_lex_u32 == 19200)
+ ao_serial_set_speed(AO_SERIAL_SPEED_19200);
+ else
+ ao_cmd_status = ao_cmd_syntax_error;
+}
+
+void
+ao_btm_check_link() __critical
+{
+ if (P2_1) {
+ ao_btm_connected = 0;
+ PICTL |= PICTL_P2ICON;
+ } else {
+ ao_btm_connected = 1;
+ PICTL &= ~PICTL_P2ICON;
+ }
+}
+
+void
+ao_btm_isr(void)
+{
+ if (P2IFG & (1 << 1)) {
+ ao_btm_check_link();
+ ao_wakeup(&ao_btm_connected);
+ }
+ P2IFG = 0;
+}
+
__code struct ao_cmds ao_btm_cmds[] = {
{ ao_btm_forward, "B\0BTM serial link." },
{ ao_btm_dump, "d\0Dump btm buffer." },
+ { ao_btm_speed, "s <19200,57600>\0Set btm serial speed." },
{ 0, NULL },
};
{
ao_serial_init();
ao_serial_set_speed(AO_SERIAL_SPEED_19200);
+
+ /*
+ * Configure link status line
+ */
+
+ /* Set P2_1 to input, pull-down */
+ P2DIR &= ~(1 << 1);
+ P2INP |= P2INP_MDP2_1_TRISTATE;
+
+ /* Enable P2 interrupts */
+ IEN2 |= IEN2_P2IE;
+ ao_btm_check_link();
+ PICTL |= PICTL_P2IEN;
+
ao_add_task(&ao_btm_task, ao_btm, "bt");
ao_cmd_register(&ao_btm_cmds[0]);
}