Hi Laura, Kim,
-This is a request for quote on raw boards and partial turnkey assembly of
-TeleFire 1.0 and TeleLCO 1.0. We're planning on running this pair of
-products through 'kickstarter', which means we would set a minimum order
-size, but the order could end up larger than that. I think we'll need to
-have quotes for 10, 25, 50 of each board to help set the pricing in
-the campaign.
-
-Kim, like some of our other products, this one has a notch in one side to
-allow a micro USB connector to overhang the board edge. As a result, these
-need to be tab-routed. We have no discussed optimal panelization for a board
-of this geometry before, so please let me know what a good arrangement would
-be if we want to build these in lots of 100'ish. My latest FreeDFM run
-resulted in quote 3956159. We'll want to run these in standard spec with
-the cheapest option which I think is 5 days.
+This is a request for quote on raw boards and partial turnkey assembly
+of two new products, TeleLCO 1.0 and TeleFire 1.0. We're planning on
+running these through 'kickstarter', so we'll set a minimum build
+quantity, but the order could end up larger than that. We'd like to
+get quotes for 10, 25, 50 for TeleLCO and 20, 50, 100 TeleFire to help
+set the pricing in the campaign
+
+Kim, like some of our other products, this one has a notch in one side
+to allow a micro USB connector to overhang the board edge. As a
+result, these need to be tab-routed. We have no discussed optimal
+panelization for a board of this geometry before, so please let me
+know what a good arrangement would be if we want to build these in
+lots of 10 ish. My latest FreeDFM run resulted in quotes 3956156 for
+TeleLCO and 3956159 for TeleFire. We'll want to run these in standard
+spec with the cheapest option which I think is 5 days.
Laura, the new BOM is attached, and the XYRS data is in the
-telefire.xy and telelco.xy files in the zips. As usual will provide
-some hard to find parts and want you to turnkey the rest. We're quite
-cost sensitive for these, so whatever the cheapest assembly turn
-should be fine.
+telefire.xy and telelco.xy files in the zips. As usual we will
+provide some hard to find parts and want you to turnkey the rest.
+We're quite cost sensitive for these, so whatever the cheapest
+assembly turn should be fine.
From the standard data request for assembly quotes:
Part Number: TeleFire and TeleLCO
- Revision: both 1.0
+ Revision: 1.0
- How many to assemble: 10, 25 or 50
+ How many to assemble: 10, 25 or 50 TeleLCO
+ 20, 50 or 100 TeleFire
- PCB dimensions: TeleFire is 4.00 x 4.00.
- TeleLCO is 4.50 x 3.75
+ PCB dimensions: TeleLCO is 4.50 x 3.75
+ TeleFire is 4.00 x 4.00.
How parts acquired: partial turnkey
- I will provide J3 for TeleFire and
+ We will provide J3 for TeleFire and
J5 for TeleLCO
Parts both sides?: no
projects / hw / telefirefour / blobdiff