git.gag.com Git - hw/altusmetrum/blob - pcb-rnd.mk

   1 AM=../altusmetrum
   2 SCHEME=$(AM)/scheme
   3
   4 .SUFFIXES: .lht .sch .ps .pdf .tdx
   5
   6 # need to have PROJECT defined
   7 ifndef PROJECT
   8         PROJECT=undefined
   9 endif
  10
  11 # if SCHEMATICS not defined, default to one sheet with project name
  12 ifndef SCHEMATICS
  13         SCHEMATICS=$(PROJECT).sch
  14 endif
  15
  16 CONFIG=gafrc attribs project.lht
  17
  18 all:    drc partslist partslist.csv pcb
  19
  20 drc:    $(PROJECT).drc
  21
  22 $(PROJECT).drc: $(SCHEMATICS) Makefile $(CONFIG)
  23         -lepton-netlist -g drc2 $(SCHEMATICS) -o $@
  24
  25 partslists: partslist partslist.csv partslist-dk.csv partslist-check.dk partslist-mouser.csv partslist-other.csv
  26
  27 partslist:      $(SCHEMATICS) Makefile $(AM)/preferred-parts $(CONFIG)
  28         lepton-netlist -g bom -o $(PROJECT).unsorted $(SCHEMATICS)
  29         head -n1 $(PROJECT).unsorted > partslist
  30         tail -n+2 $(PROJECT).unsorted | sort | awk -f $(AM)/bin/fillpartslist >> partslist
  31         rm -f $(PROJECT).unsorted
  32
  33 partslist.csv:  $(SCHEMATICS) Makefile $(AM)/preferred-parts $(CONFIG)
  34         lepton-netlist -L $(SCHEME) -g bomAM -o $(PROJECT).csvtmp $(SCHEMATICS)
  35         (head -n1 $(PROJECT).csvtmp; tail -n+2 $(PROJECT).csvtmp | sort -t \, -k 8 | \
  36                 awk -f $(AM)/bin/fillpartscsv | sort ) > $@ && rm -f $(PROJECT).csvtmp
  37
  38 partslist-dk.csv: partslist.csv
  39         $(AM)/bin/partslist-vendor --vendor digikey partslist.csv > $@
  40
  41 partslist-check.dk: partslist.csv
  42         $(AM)/bin/partslist-vendor --vendor digikey --mfg partslist.csv > $@
  43
  44 partslist-mouser.csv: partslist.csv
  45         $(AM)/bin/partslist-vendor --vendor mouser partslist.csv > $@
  46
  47 partslist-other.csv: partslist.csv
  48         $(AM)/bin/partslist-vendor --not-vendor digikey,mouser partslist.csv > $@
  49
  50 $(PROJECT)-seeed.csv: partslist.csv
  51         $(AM)/bin/partslist-vendor --vendor seeed partslist.csv > $@
  52
  53 $(PROJECT)-goldphoenix.csv: partslist.csv
  54         $(AM)/bin/partslist-vendor --vendor goldphoenix partslist.csv > $@
  55
  56 pcb:    $(SCHEMATICS) Makefile $(CONFIG)
  57         lepton-netlist -g tEDAx -o $(PROJECT).tdx $(SCHEMATICS)
  58         echo 'LoadTedaxFrom(netlist, $(PROJECT).tdx); SaveTo(Layout)' | \
  59                 pcb-rnd --gui batch $(PROJECT).lht
  60 #       echo "Run pcb-rnd and import $(PROJECT).tdx"
  61
  62 TOPCOPPER=$(PROJECT).top.copper.none.*.gbr
  63 TOPSILK=$(PROJECT).top.silk.none.*.gbr
  64 TOPPASTE=$(PROJECT).top.paste.none.*.gbr
  65 TOPMASK=$(PROJECT).top.mask.none.*.gbr
  66
  67 BOTTOMCOPPER=$(PROJECT).bottom.copper.none.*.gbr
  68 BOTTOMSILK=$(PROJECT).bottom.silk.none.*.gbr
  69 BOTTOMPASTE=$(PROJECT).bottom.paste.none.*.gbr
  70 BOTTOMMASK=$(PROJECT).bottom.mask.none.*.gbr
  71
  72 UDRILL=$(PROJECT).global.virtual.udrill.none.cnc
  73 PDRILL=$(PROJECT).global.virtual.pdrill.none.cnc
  74 DRILL=$(PROJECT).global.virtual.drill.none.cnc
  75
  76 OUTLINE=$(PROJECT).global.boundary.uroute.*.gbr
  77
  78 $(PROJECT).xy:  $(PROJECT).lht $(CONFIG)
  79         pcb-rnd -x XY $(PROJECT).lht
  80
  81 $(BOTTOMCOPPER):        $(PROJECT).lht $(CONFIG)
  82         pcb-rnd -x gerber $(PROJECT).lht
  83         @case "$(SILK)" in \
  84         none)   rm -f $(PROJECT).topsilk.gbr $(BOTTOMCOPPER); \
  85                 ;; \
  86         top)    rm -f $(PROJECT).bottomsilk.gbr; \
  87                 ;; \
  88         bottom) rm -f $(PROJECT).topsilk.gbr; \
  89                 ;; \
  90         both) \
  91                 ;; \
  92         *)      echo "Invalid silk $(SILK)"; exit 1; \
  93                 ;; \
  94         esac
  95
  96 $(DRILL): $(BOTTOMCOPPER)
  97         gerbv -x drill -o $(DRILL) $(UDRILL) $(PDRILL)
  98
  99 zip: $(PROJECT).zip
 100
 101 $(PROJECT).zip: $(BOTTOMCOPPER) $(PROJECT).xy Makefile
 102         rm -f $@ && zip $@ $(PROJECT).*.gbr $(PROJECT).*.cnc $(PROJECT).xy # $(PROJECT).xls
 103
 104 ac: $(PROJECT)-ac.zip $(PROJECT)-bom.csv
 105
 106 $(PROJECT)-bom.csv: partslist.csv
 107         cp partslist.csv $@
 108
 109 $(PROJECT)-ac.zip:  $(BOTTOMCOPPER) $(PROJECT).xy
 110         cp $(BOTTOMCOPPER) $(PROJECT).gbl
 111         cp $(BOTTOMMASK) $(PROJECT).gbs
 112         if [ -f $(BOTTOMSILK) ]; then \
 113                 cp $(BOTTOMSILK) $(PROJECT).gbo; \
 114         fi
 115         if [ -f $(BOTTOMPASTE) ]; then \
 116                 cp $(BOTTOMPASTE) $(PROJECT).gbp; \
 117         fi
 118         if [ -f $(TOPSILK) ]; then \
 119                 cp $(TOPSILK) $(PROJECT).gto; \
 120         fi
 121         if [ -f $(TOPPASTE) ]; then \
 122                 cp $(TOPPASTE) $(PROJECT).gtp; \
 123         fi
 124         cp $(OUTLINE) $(PROJECT).gml
 125         cp $(TOPCOPPER) $(PROJECT).gtl
 126         cp $(TOPMASK) $(PROJECT).gts
 127         cp $(PDRILL) $(PROJECT).ncd
 128         if [ -f $(UDRILL) ]; then \
 129                 cp $(UDRILL) $(PROJECT).drd; \
 130         fi
 131         if [ -f $(PROJECT).group1.gbr -a -f $(PROJECT).group2.gbr ]; then \
 132                 cp $(PROJECT).group1.gbr $(PROJECT).gl2; \
 133                 cp $(PROJECT).group2.gbr $(PROJECT).gl3; \
 134         elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
 135                 cp $(PROJECT).group2.gbr $(PROJECT).gl2; \
 136                 cp $(PROJECT).group3.gbr $(PROJECT).gl3; \
 137         elif [ -f $(PROJECT).group5.gbr -a -f $(PROJECT).group7.gbr ]; then \
 138                 cp $(PROJECT).group5.gbr $(PROJECT).gl2; \
 139                 cp $(PROJECT).group7.gbr $(PROJECT).gl3; \
 140         fi
 141         rm -f $@ && zip $@ \
 142                 $(PROJECT).gtl $(PROJECT).gts $(PROJECT).gto $(PROJECT).gtp \
 143                 $(PROJECT).gbl $(PROJECT).gbs $(PROJECT).gbo $(PROJECT).gbp \
 144                 $(PROJECT).gml $(PROJECT).ncd $(PROJECT).gml $(PROJECT).drd \
 145                 $(PROJECT).gl2 $(PROJECT).gl3 \
 146                 $(PROJECT).xy
 147
 148 oshpark: $(PROJECT)-oshpark.zip
 149
 150 $(PROJECT)-oshpark.zip: $(BOTTOMCOPPER) $(DRILL)
 151         cp $(BOTTOMCOPPER) bottom\ layer.ger
 152         cp $(BOTTOMMASK) bottom\ solder\ mask.ger
 153         if [ -f $(BOTTOMSILK) ]; then \
 154                 cp $(BOTTOMSILK) bottom\ silk\ screen.ger; \
 155         fi
 156         if [ -f $(TOPSILK) ]; then \
 157                 cp $(TOPSILK) top\ silk\ screen.ger; \
 158         fi
 159         cp $(OUTLINE) board\ outline.ger
 160         cp $(TOPCOPPER) top\ layer.ger
 161         cp $(TOPMASK) top\ solder\ mask.ger
 162         cp $(DRILL) drills.xln
 163         if [ -f $(PROJECT).group1.gbr -a -f $(PROJECT).group2.gbr ]; then \
 164                 cp $(PROJECT).group1.gbr internal\ plane\ 1.ger; \
 165                 cp $(PROJECT).group2.gbr internal\ plane\ 2.ger; \
 166         elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
 167                 cp $(PROJECT).group2.gbr internal\ plane\ 1.ger; \
 168                 cp $(PROJECT).group3.gbr internal\ plane\ 2.ger; \
 169         elif [ -f $(PROJECT).group5.gbr -a -f $(PROJECT).group7.gbr ]; then \
 170                 cp $(PROJECT).group5.gbr internal\ plane\ 1.ger; \
 171                 cp $(PROJECT).group7.gbr internal\ plane\ 2.ger; \
 172         fi
 173         rm -f $@ && zip $@ *.ger *.xln
 174
 175 seeed: $(PROJECT)-seeed.zip $(PROJECT)-seeed.csv
 176
 177 $(PROJECT)-seeed.zip: $(BOTTOMCOPPER) $(DRILL) $(PROJECT)-sch.pdf $(PROJECT).xy $(SEEED_EXTRA)
 178         cp $(BOTTOMCOPPER) $(PROJECT).gbl
 179         cp $(BOTTOMMASK) $(PROJECT).gbs
 180         if [ -f $(BOTTOMSILK) ]; then \
 181                 cp $(BOTTOMSILK) $(PROJECT).gbo; \
 182         fi
 183         if [ -f $(BOTTOMPASTE) ]; then \
 184                 cp $(BOTTOMPASTE) $(PROJECT).gbp; \
 185         fi
 186         if [ -f $(TOPSILK) ]; then \
 187                 cp $(TOPSILK) $(PROJECT).gto; \
 188         fi
 189         if [ -f $(TOPPASTE) ]; then \
 190                 cp $(TOPPASTE) $(PROJECT).gtp; \
 191         fi
 192         cp $(OUTLINE) $(PROJECT).gml
 193         cp $(TOPCOPPER) $(PROJECT).gtl
 194         cp $(TOPMASK) $(PROJECT).gts
 195         cp $(DRILL) $(PROJECT).txt
 196         if [ -f $(PROJECT).group1.gbr -a -f $(PROJECT).group2.gbr ]; then \
 197                 cp $(PROJECT).group1.gbr $(PROJECT).gl2; \
 198                 cp $(PROJECT).group2.gbr $(PROJECT).gl3; \
 199         elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
 200                 cp $(PROJECT).group2.gbr $(PROJECT).gl2; \
 201                 cp $(PROJECT).group3.gbr $(PROJECT).gl3; \
 202         elif [ -f $(PROJECT).group5.gbr -a -f $(PROJECT).group7.gbr ]; then \
 203                 cp $(PROJECT).group5.gbr $(PROJECT).gl2; \
 204                 cp $(PROJECT).group7.gbr $(PROJECT).gl3; \
 205         fi
 206         rm -f $@ && zip $@ \
 207                 $(PROJECT).gtl $(PROJECT).gts $(PROJECT).gto $(PROJECT).gtp \
 208                 $(PROJECT).gbl $(PROJECT).gbs $(PROJECT).gbo $(PROJECT).gbp \
 209                 $(PROJECT).gml $(PROJECT).txt \
 210                 $(PROJECT).gl2 $(PROJECT).gl3 \
 211                 $(PROJECT).xy $(PROJECT)-sch.pdf \
 212                 $(SEEED_EXTRA)
 213
 214 goldphoenix: $(PROJECT)-goldphoenix.zip
 215
 216 $(PROJECT)-goldphoenix.zip: $(BOTTOMCOPPER) $(DRILL) $(PROJECT)-sch.pdf $(PROJECT).xy $(PROJECT)-goldphoenix.csv
 217         cp $(BOTTOMCOPPER) $(PROJECT).gbl
 218         cp $(BOTTOMMASK) $(PROJECT).gbs
 219         if [ -f $(BOTTOMSILK) ]; then \
 220                 cp $(BOTTOMSILK) $(PROJECT).gbo; \
 221         fi
 222         if [ -f $(BOTTOMPASTE) ]; then \
 223                 cp $(BOTTOMPASTE) $(PROJECT).gbp; \
 224         fi
 225         if [ -f $(TOPSILK) ]; then \
 226                 cp $(TOPSILK) $(PROJECT).gto; \
 227         fi
 228         if [ -f $(TOPPASTE) ]; then \
 229                 cp $(TOPPASTE) $(PROJECT).gtp; \
 230         fi
 231         cp $(OUTLINE) $(PROJECT).gml
 232         cp $(TOPCOPPER) $(PROJECT).gtl
 233         cp $(TOPMASK) $(PROJECT).gts
 234         cp $(DRILL) $(PROJECT).txt
 235         if [ -f $(PROJECT).group1.gbr -a -f $(PROJECT).group2.gbr ]; then \
 236                 cp $(PROJECT).group1.gbr $(PROJECT).gl2; \
 237                 cp $(PROJECT).group2.gbr $(PROJECT).gl3; \
 238         elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
 239                 cp $(PROJECT).group2.gbr $(PROJECT).gl2; \
 240                 cp $(PROJECT).group3.gbr $(PROJECT).gl3; \
 241         elif [ -f $(PROJECT).group5.gbr -a -f $(PROJECT).group7.gbr ]; then \
 242                 cp $(PROJECT).group5.gbr $(PROJECT).gl2; \
 243                 cp $(PROJECT).group7.gbr $(PROJECT).gl3; \
 244         fi
 245         rm -f $@ && zip $@ \
 246                 $(PROJECT).gtl $(PROJECT).gts $(PROJECT).gto $(PROJECT).gtp \
 247                 $(PROJECT).gbl $(PROJECT).gbs $(PROJECT).gbo $(PROJECT).gbp \
 248                 $(PROJECT).gml $(PROJECT).txt \
 249                 $(PROJECT).gl2 $(PROJECT).gl3 \
 250                 $(PROJECT).xy $(PROJECT)-sch.pdf \
 251                 $(PROJECT)-goldphoenix.csv
 252
 253 jlcpcb: $(PROJECT)-jlcpcb.zip
 254
 255 $(PROJECT)-jlcpcb.zip:  $(BOTTOMCOPPER) $(PROJECT).xy
 256         cp $(BOTTOMCOPPER) $(PROJECT).gbl
 257         cp $(BOTTOMMASK) $(PROJECT).gbs
 258         if [ -f $(BOTTOMSILK) ]; then \
 259                 cp $(BOTTOMSILK) $(PROJECT).gbo; \
 260         fi
 261         if [ -f $(BOTTOMPASTE) ]; then \
 262                 cp $(BOTTOMPASTE) $(PROJECT).gbp; \
 263         fi
 264         if [ -f $(TOPSILK) ]; then \
 265                 cp $(TOPSILK) $(PROJECT).gto; \
 266         fi
 267         if [ -f $(PROJECT).toppaste.gbr ]; then \
 268                 cp $(PROJECT).toppaste.gbr $(PROJECT).gtp; \
 269         fi
 270         cp $(OUTLINE) $(PROJECT).gko
 271         cp $(TOPCOPPER) $(PROJECT).gtl
 272         cp $(PROJECT).topmask.gbr $(PROJECT).gts
 273         cp $(PROJECT).plated-drill.cnc $(PROJECT).xln
 274         if [ -f $(UDRILL) ]; then \
 275                 cp $(UDRILL) $(PROJECT).drd; \
 276         fi
 277         if [ -f $(PROJECT).group1.gbr -a -f $(PROJECT).group2.gbr ]; then \
 278                 cp $(PROJECT).group1.gbr $(PROJECT).g2l; \
 279                 cp $(PROJECT).group2.gbr $(PROJECT).g3l; \
 280         elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
 281                 cp $(PROJECT).group2.gbr $(PROJECT).g2l; \
 282                 cp $(PROJECT).group3.gbr $(PROJECT).g3l; \
 283         elif [ -f $(PROJECT).group5.gbr -a -f $(PROJECT).group7.gbr ]; then \
 284                 cp $(PROJECT).group5.gbr $(PROJECT).g2l; \
 285                 cp $(PROJECT).group7.gbr $(PROJECT).g3l; \
 286         fi
 287         rm -f $@ && zip $@ \
 288                 $(PROJECT).gtl $(PROJECT).gts $(PROJECT).gto $(PROJECT).gtp \
 289                 $(PROJECT).gbl $(PROJECT).gbs $(PROJECT).gbo $(PROJECT).gbp \
 290                 $(PROJECT).gko $(PROJECT).xln $(PROJECT).drd \
 291                 $(PROJECT).g2l $(PROJECT).g3l
 292
 293 stencilsunlimited:      $(BOTTOMCOPPER) $(PROJECT).toppaste.gbr $(OUTLINE)
 294         rm -f $(PROJECT)-stencil.zip && zip $(PROJECT)-stencil.zip $(PROJECT).toppaste.gbr $(OUTLINE)
 295
 296 stencil:        $(PROJECT).lht
 297         pcb-rnd -x gerber -c design/paste_adjust=-10mil $(PROJECT).lht
 298         mv $(PROJECT).top.paste.none.0.gbr stencil.gbr
 299
 300 clean:
 301         rm -f *.bom *.drc *.log *~ $(PROJECT).ps *.gbr *.cnc *bak* *- *.zip *.tdx *.backup
 302         rm -f *.net *.xy *.cmd *.png partslist partslist.csv *.ger *.xln PCB*save
 303         rm -f *.partslist *.unsorted $(PROJECT).xls muffin-*.pdf
 304         rm -f partslist-check.dk partslist-dk.csv partslist-mouser.csv partslist-other.csv
 305         rm -f $(PROJECT)-sch.ps $(PROJECT)-sch.pdf $(PROJECT)-pcb.ps $(PROJECT)-pcb.pdf
 306         rm -f $(PROJECT).gbl $(PROJECT).gbs $(PROJECT).gbo $(PROJECT).gbp $(PROJECT).ncd
 307         rm -f $(PROJECT).gto $(PROJECT).gtp $(PROJECT).gml $(PROJECT).gtl $(PROJECT).gts
 308         rm -f $(PROJECT).txt $(PROJECT).gl2 $(PROJECT).gl3
 309         rm -f $(PROJECT).drd $(PROJECT).g2l $(PROJECT).g3l $(PROJECT).gko
 310         rm -f $(PROJECT)-seeed.zip $(PROJECT)-seeed.csv
 311         rm -f $(PROJECT)-goldphoenix.zip $(PROJECT)-goldphoenix.csv
 312         rm -f $(PROJECT)*.ps $(PROJECT)*.pdf $(PROJECT)-bom.csv
 313
 314 muffins: muffin-6570.pdf muffin-5267.pdf muffin-keithp.pdf
 315
 316 muffin-6570.pdf: partslist.csv $(AM)/glabels/muffin-6570.glabels
 317         glabels-3-batch $(AM)/glabels/muffin-6570.glabels -i partslist.csv -o $@ > /dev/null
 318
 319 muffin-5267.pdf: partslist.csv $(AM)/glabels/muffin-short-5267.glabels
 320         glabels-3-batch $(AM)/glabels/muffin-short-5267.glabels -i partslist.csv -o $@ > /dev/null
 321
 322 muffin-keithp.pdf: partslist.csv $(AM)/glabels/muffin-5267.glabels
 323         glabels-3-batch $(AM)/glabels/muffin-5267.glabels -i partslist.csv -o $@ > /dev/null
 324
 325 .sch.ps:
 326         gschem -p -o $@ -s /usr/share/gEDA/scheme/print.scm $*.sch
 327
 328 .ps.pdf:
 329         ps2pdf $*.ps
 330
 331 SCHEMATICS_PS=$(SCHEMATICS:.sch=.ps)
 332 SCHEMATICS_PDF=$(SCHEMATICS:.sch=.pdf)
 333
 334 $(PROJECT)-sch.pdf:     $(SCHEMATICS_PDF)
 335         pdfjoin -o $@ $(SCHEMATICS_PDF)
 336
 337 $(PROJECT)-pcb.ps:      $(PROJECT).lht $(CONFIG)
 338         pcb-rnd -x ps --psfile $@ --media Letter --ps-color $(PROJECT).lht
 339
 340 $(PROJECT)-pcb.pdf:     $(PROJECT)-pcb.ps
 341         ps2pdf $(PROJECT)-pcb.ps
 342
 343 $(PROJECT)-big.ps:      $(PROJECT).lht $(CONFIG)
 344         pcb-rnd -x ps --psfile $@ --media Letter --ps-color --fill-page --no-align-marks $(PROJECT).lht
 345
 346 $(PROJECT)-big.pdf:     $(PROJECT)-big.ps
 347         ps2pdf $(PROJECT)-big.ps
 348
 349 pdf:    $(PROJECT)-sch.pdf $(PROJECT)-pcb.pdf $(PROJECT)-big.pdf
 350
 351 attribs: $(AM)/attribs
 352         cp $(AM)/attribs $@
 353
 354 gafrc:
 355         (echo '; empty the library path and populate it with only our own symbols'; \
 356          echo '(reset-component-library)'; \
 357          echo '(load "../altusmetrum/gafrc")') > $@
 358
 359 project.lht: $(AM)/lihata/project.lht
 360         cp $(AM)/lihata/project.lht .
 361
 362 .gitignore: $(AM)/gitignore.in
 363         sed 's/@@PROJECT@@/$(PROJECT)/g' $(AM)/gitignore.in > .gitignore