git.gag.com Git - hw/altusmetrum/blob - pcb-rnd.mk

   1 AM=../altusmetrum
   2 SCHEME=$(AM)/scheme
   3
   4 .SUFFIXES: .lht .sch .ps .pdf .tdx
   5
   6 # need to have PROJECT defined
   7 ifndef PROJECT
   8         PROJECT=undefined
   9 endif
  10
  11 # if SCHEMATICS not defined, default to one sheet with project name
  12 ifndef SCHEMATICS
  13         SCHEMATICS=$(PROJECT).sch
  14 endif
  15
  16 CONFIG=gafrc attribs project.lht
  17
  18 all:    drc partslist partslist.csv pcb
  19
  20 drc:    $(PROJECT).drc
  21
  22 $(PROJECT).drc: $(SCHEMATICS) Makefile $(CONFIG)
  23         -lepton-netlist -g drc2 $(SCHEMATICS) -o $@
  24
  25 partslists: partslist partslist.csv partslist-dk.csv partslist-check.dk partslist-mouser.csv partslist-other.csv
  26
  27 partslist:      $(SCHEMATICS) Makefile $(AM)/preferred-parts $(CONFIG)
  28         lepton-netlist -g bom -o $(PROJECT).unsorted $(SCHEMATICS)
  29         head -n1 $(PROJECT).unsorted > partslist
  30         tail -n+2 $(PROJECT).unsorted | sort | awk -f $(AM)/bin/fillpartslist >> partslist
  31         rm -f $(PROJECT).unsorted
  32
  33 partslist.csv:  $(SCHEMATICS) Makefile $(AM)/preferred-parts $(CONFIG)
  34         lepton-netlist -L $(SCHEME) -g bomAM -o $(PROJECT).csvtmp $(SCHEMATICS)
  35         (head -n1 $(PROJECT).csvtmp; tail -n+2 $(PROJECT).csvtmp | sort -t \, -k 8 | \
  36                 awk -f $(AM)/bin/fillpartscsv | sort ) > $@ && rm -f $(PROJECT).csvtmp
  37
  38 partslist-dk.csv: partslist.csv
  39         $(AM)/bin/partslist-vendor --vendor digikey partslist.csv > $@
  40
  41 partslist-check.dk: partslist.csv
  42         $(AM)/bin/partslist-vendor --vendor digikey --mfg partslist.csv > $@
  43
  44 partslist-mouser.csv: partslist.csv
  45         $(AM)/bin/partslist-vendor --vendor mouser partslist.csv > $@
  46
  47 partslist-other.csv: partslist.csv
  48         $(AM)/bin/partslist-vendor --not-vendor digikey,mouser partslist.csv > $@
  49
  50 $(PROJECT)-seeed.csv: partslist.csv
  51         $(AM)/bin/partslist-vendor --vendor seeed partslist.csv > $@
  52
  53 $(PROJECT)-goldphoenix.csv: partslist.csv
  54         $(AM)/bin/partslist-vendor --vendor goldphoenix partslist.csv > $@
  55
  56 pcb:    $(SCHEMATICS) Makefile $(CONFIG)
  57         lepton-netlist -g tEDAx -o $(PROJECT).tdx $(SCHEMATICS)
  58         echo 'LoadTedaxFrom(netlist, $(PROJECT).tdx); SaveTo(Layout)' | \
  59                 pcb-rnd --gui batch $(PROJECT).lht
  60
  61 $(PROJECT).xy:  $(PROJECT).lht $(CONFIG)
  62         pcb-rnd -x XY $(PROJECT).lht
  63
  64 $(PROJECT).bottom.gbr:  $(PROJECT).lht $(CONFIG)
  65         pcb-rnd -x gerber $(PROJECT).lht
  66         @case "$(SILK)" in \
  67         none)   rm -f $(PROJECT).topsilk.gbr $(PROJECT).bottom.gbr; \
  68                 ;; \
  69         top)    rm -f $(PROJECT).bottomsilk.gbr; \
  70                 ;; \
  71         bottom) rm -f $(PROJECT).topsilk.gbr; \
  72                 ;; \
  73         both) \
  74                 ;; \
  75         *)      echo "Invalid silk $(SILK)"; exit 1; \
  76                 ;; \
  77         esac
  78
  79 $(PROJECT).all-drill.cnc: $(PROJECT).bottom.gbr
  80         gerbv -x drill -o $(PROJECT).all-drill.cnc $(PROJECT).plated-drill.cnc $(PROJECT).unplated-drill.cnc
  81
  82 zip: $(PROJECT).zip
  83
  84 $(PROJECT).zip: $(PROJECT).bottom.gbr $(PROJECT).xy Makefile
  85         rm -f $@ && zip $@ $(PROJECT).*.gbr $(PROJECT).*.cnc $(PROJECT).xy # $(PROJECT).xls
  86
  87 ac: $(PROJECT)-ac.zip $(PROJECT)-bom.csv
  88
  89 $(PROJECT)-bom.csv: partslist.csv
  90         cp partslist.csv $@
  91
  92 $(PROJECT)-ac.zip:  $(PROJECT).bottom.gbr $(PROJECT).xy
  93         cp $(PROJECT).bottom.gbr $(PROJECT).gbl
  94         cp $(PROJECT).bottommask.gbr $(PROJECT).gbs
  95         if [ -f $(PROJECT).bottomsilk.gbr ]; then \
  96                 cp $(PROJECT).bottomsilk.gbr $(PROJECT).gbo; \
  97         fi
  98         if [ -f $(PROJECT).bottompaste.gbr ]; then \
  99                 cp $(PROJECT).bottompaste.gbr $(PROJECT).gbp; \
 100         fi
 101         if [ -f $(PROJECT).topsilk.gbr ]; then \
 102                 cp $(PROJECT).topsilk.gbr $(PROJECT).gto; \
 103         fi
 104         if [ -f $(PROJECT).toppaste.gbr ]; then \
 105                 cp $(PROJECT).toppaste.gbr $(PROJECT).gtp; \
 106         fi
 107         cp $(PROJECT).outline.gbr $(PROJECT).gml
 108         cp $(PROJECT).top.gbr $(PROJECT).gtl
 109         cp $(PROJECT).topmask.gbr $(PROJECT).gts
 110         cp $(PROJECT).plated-drill.cnc $(PROJECT).ncd
 111         if [ -f $(PROJECT).unplated-drill.cnc ]; then \
 112                 cp $(PROJECT).unplated-drill.cnc $(PROJECT).drd; \
 113         fi
 114         if [ -f $(PROJECT).group1.gbr -a -f $(PROJECT).group2.gbr ]; then \
 115                 cp $(PROJECT).group1.gbr $(PROJECT).gl2; \
 116                 cp $(PROJECT).group2.gbr $(PROJECT).gl3; \
 117         elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
 118                 cp $(PROJECT).group2.gbr $(PROJECT).gl2; \
 119                 cp $(PROJECT).group3.gbr $(PROJECT).gl3; \
 120         elif [ -f $(PROJECT).group5.gbr -a -f $(PROJECT).group7.gbr ]; then \
 121                 cp $(PROJECT).group5.gbr $(PROJECT).gl2; \
 122                 cp $(PROJECT).group7.gbr $(PROJECT).gl3; \
 123         fi
 124         rm -f $@ && zip $@ \
 125                 $(PROJECT).gtl $(PROJECT).gts $(PROJECT).gto $(PROJECT).gtp \
 126                 $(PROJECT).gbl $(PROJECT).gbs $(PROJECT).gbo $(PROJECT).gbp \
 127                 $(PROJECT).gml $(PROJECT).ncd $(PROJECT).gml $(PROJECT).drd \
 128                 $(PROJECT).gl2 $(PROJECT).gl3 \
 129                 $(PROJECT).xy
 130
 131 oshpark: $(PROJECT)-oshpark.zip
 132
 133 $(PROJECT)-oshpark.zip: $(PROJECT).bottom.gbr $(PROJECT).all-drill.cnc
 134         cp $(PROJECT).bottom.gbr bottom\ layer.ger
 135         cp $(PROJECT).bottommask.gbr bottom\ solder\ mask.ger
 136         if [ -f $(PROJECT).bottomsilk.gbr ]; then \
 137                 cp $(PROJECT).bottomsilk.gbr bottom\ silk\ screen.ger; \
 138         fi
 139         if [ -f $(PROJECT).topsilk.gbr ]; then \
 140                 cp $(PROJECT).topsilk.gbr top\ silk\ screen.ger; \
 141         fi
 142         cp $(PROJECT).outline.gbr board\ outline.ger
 143         cp $(PROJECT).top.gbr top\ layer.ger
 144         cp $(PROJECT).topmask.gbr top\ solder\ mask.ger
 145         cp $(PROJECT).all-drill.cnc drills.xln
 146         if [ -f $(PROJECT).group1.gbr -a -f $(PROJECT).group2.gbr ]; then \
 147                 cp $(PROJECT).group1.gbr internal\ plane\ 1.ger; \
 148                 cp $(PROJECT).group2.gbr internal\ plane\ 2.ger; \
 149         elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
 150                 cp $(PROJECT).group2.gbr internal\ plane\ 1.ger; \
 151                 cp $(PROJECT).group3.gbr internal\ plane\ 2.ger; \
 152         elif [ -f $(PROJECT).group5.gbr -a -f $(PROJECT).group7.gbr ]; then \
 153                 cp $(PROJECT).group5.gbr internal\ plane\ 1.ger; \
 154                 cp $(PROJECT).group7.gbr internal\ plane\ 2.ger; \
 155         fi
 156         rm -f $@ && zip $@ *.ger *.xln
 157
 158 seeed: $(PROJECT)-seeed.zip $(PROJECT)-seeed.csv
 159
 160 $(PROJECT)-seeed.zip: $(PROJECT).bottom.gbr $(PROJECT).all-drill.cnc $(PROJECT)-sch.pdf $(PROJECT).xy $(SEEED_EXTRA)
 161         cp $(PROJECT).bottom.gbr $(PROJECT).gbl
 162         cp $(PROJECT).bottommask.gbr $(PROJECT).gbs
 163         if [ -f $(PROJECT).bottomsilk.gbr ]; then \
 164                 cp $(PROJECT).bottomsilk.gbr $(PROJECT).gbo; \
 165         fi
 166         if [ -f $(PROJECT).bottompaste.gbr ]; then \
 167                 cp $(PROJECT).bottompaste.gbr $(PROJECT).gbp; \
 168         fi
 169         if [ -f $(PROJECT).topsilk.gbr ]; then \
 170                 cp $(PROJECT).topsilk.gbr $(PROJECT).gto; \
 171         fi
 172         if [ -f $(PROJECT).toppaste.gbr ]; then \
 173                 cp $(PROJECT).toppaste.gbr $(PROJECT).gtp; \
 174         fi
 175         cp $(PROJECT).outline.gbr $(PROJECT).gml
 176         cp $(PROJECT).top.gbr $(PROJECT).gtl
 177         cp $(PROJECT).topmask.gbr $(PROJECT).gts
 178         cp $(PROJECT).all-drill.cnc $(PROJECT).txt
 179         if [ -f $(PROJECT).group1.gbr -a -f $(PROJECT).group2.gbr ]; then \
 180                 cp $(PROJECT).group1.gbr $(PROJECT).gl2; \
 181                 cp $(PROJECT).group2.gbr $(PROJECT).gl3; \
 182         elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
 183                 cp $(PROJECT).group2.gbr $(PROJECT).gl2; \
 184                 cp $(PROJECT).group3.gbr $(PROJECT).gl3; \
 185         elif [ -f $(PROJECT).group5.gbr -a -f $(PROJECT).group7.gbr ]; then \
 186                 cp $(PROJECT).group5.gbr $(PROJECT).gl2; \
 187                 cp $(PROJECT).group7.gbr $(PROJECT).gl3; \
 188         fi
 189         rm -f $@ && zip $@ \
 190                 $(PROJECT).gtl $(PROJECT).gts $(PROJECT).gto $(PROJECT).gtp \
 191                 $(PROJECT).gbl $(PROJECT).gbs $(PROJECT).gbo $(PROJECT).gbp \
 192                 $(PROJECT).gml $(PROJECT).txt \
 193                 $(PROJECT).gl2 $(PROJECT).gl3 \
 194                 $(PROJECT).xy $(PROJECT)-sch.pdf \
 195                 $(SEEED_EXTRA)
 196
 197 goldphoenix: $(PROJECT)-goldphoenix.zip
 198
 199 $(PROJECT)-goldphoenix.zip: $(PROJECT).bottom.gbr $(PROJECT).all-drill.cnc $(PROJECT)-sch.pdf $(PROJECT).xy $(PROJECT)-goldphoenix.csv
 200         cp $(PROJECT).bottom.gbr $(PROJECT).gbl
 201         cp $(PROJECT).bottommask.gbr $(PROJECT).gbs
 202         if [ -f $(PROJECT).bottomsilk.gbr ]; then \
 203                 cp $(PROJECT).bottomsilk.gbr $(PROJECT).gbo; \
 204         fi
 205         if [ -f $(PROJECT).bottompaste.gbr ]; then \
 206                 cp $(PROJECT).bottompaste.gbr $(PROJECT).gbp; \
 207         fi
 208         if [ -f $(PROJECT).topsilk.gbr ]; then \
 209                 cp $(PROJECT).topsilk.gbr $(PROJECT).gto; \
 210         fi
 211         if [ -f $(PROJECT).toppaste.gbr ]; then \
 212                 cp $(PROJECT).toppaste.gbr $(PROJECT).gtp; \
 213         fi
 214         cp $(PROJECT).outline.gbr $(PROJECT).gml
 215         cp $(PROJECT).top.gbr $(PROJECT).gtl
 216         cp $(PROJECT).topmask.gbr $(PROJECT).gts
 217         cp $(PROJECT).all-drill.cnc $(PROJECT).txt
 218         if [ -f $(PROJECT).group1.gbr -a -f $(PROJECT).group2.gbr ]; then \
 219                 cp $(PROJECT).group1.gbr $(PROJECT).gl2; \
 220                 cp $(PROJECT).group2.gbr $(PROJECT).gl3; \
 221         elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
 222                 cp $(PROJECT).group2.gbr $(PROJECT).gl2; \
 223                 cp $(PROJECT).group3.gbr $(PROJECT).gl3; \
 224         elif [ -f $(PROJECT).group5.gbr -a -f $(PROJECT).group7.gbr ]; then \
 225                 cp $(PROJECT).group5.gbr $(PROJECT).gl2; \
 226                 cp $(PROJECT).group7.gbr $(PROJECT).gl3; \
 227         fi
 228         rm -f $@ && zip $@ \
 229                 $(PROJECT).gtl $(PROJECT).gts $(PROJECT).gto $(PROJECT).gtp \
 230                 $(PROJECT).gbl $(PROJECT).gbs $(PROJECT).gbo $(PROJECT).gbp \
 231                 $(PROJECT).gml $(PROJECT).txt \
 232                 $(PROJECT).gl2 $(PROJECT).gl3 \
 233                 $(PROJECT).xy $(PROJECT)-sch.pdf \
 234                 $(PROJECT)-goldphoenix.csv
 235
 236 stencilsunlimited:      $(PROJECT).bottom.gbr $(PROJECT).toppaste.gbr $(PROJECT).outline.gbr
 237         rm -f $(PROJECT)-stencil.zip && zip $(PROJECT)-stencil.zip $(PROJECT).toppaste.gbr $(PROJECT).outline.gbr
 238
 239 stencil:        $(PROJECT).lht
 240         pcb-rnd -x gerber -c design/paste_adjust=-3mil $(PROJECT).lht
 241         mv $(PROJECT).toppaste.gbr stencil.gbr
 242
 243 clean:
 244         rm -f *.bom *.drc *.log *~ $(PROJECT).ps *.gbr *.cnc *bak* *- *.zip *.tdx
 245         rm -f *.net *.xy *.cmd *.png partslist partslist.csv *.ger *.xln PCB*save
 246         rm -f *.partslist *.unsorted $(PROJECT).xls muffin-*.pdf
 247         rm -f partslist-check.dk partslist-dk.csv partslist-mouser.csv partslist-other.csv
 248         rm -f $(PROJECT)-sch.ps $(PROJECT)-sch.pdf $(PROJECT)-pcb.ps $(PROJECT)-pcb.pdf
 249         rm -f $(PROJECT).gbl $(PROJECT).gbs $(PROJECT).gbo $(PROJECT).gbp $(PROJECT).ncd
 250         rm -f $(PROJECT).gto $(PROJECT).gtp $(PROJECT).gml $(PROJECT).gtl $(PROJECT).gts
 251         rm -f $(PROJECT).txt $(PROJECT).gl2 $(PROJECT).gl3
 252         rm -f $(PROJECT)-seeed.zip $(PROJECT)-seeed.csv
 253         rm -f $(PROJECT)-goldphoenix.zip $(PROJECT)-goldphoenix.csv
 254         rm -f $(PROJECT)*.ps $(PROJECT)*.pdf $(PROJECT)-bom.csv
 255
 256 muffins: muffin-6570.pdf muffin-5267.pdf muffin-keithp.pdf
 257
 258 muffin-6570.pdf: partslist.csv $(AM)/glabels/muffin-6570.glabels
 259         glabels-3-batch $(AM)/glabels/muffin-6570.glabels -i partslist.csv -o $@ > /dev/null
 260
 261 muffin-5267.pdf: partslist.csv $(AM)/glabels/muffin-short-5267.glabels
 262         glabels-3-batch $(AM)/glabels/muffin-short-5267.glabels -i partslist.csv -o $@ > /dev/null
 263
 264 muffin-keithp.pdf: partslist.csv $(AM)/glabels/muffin-5267.glabels
 265         glabels-3-batch $(AM)/glabels/muffin-5267.glabels -i partslist.csv -o $@ > /dev/null
 266
 267 .sch.ps:
 268         gschem -p -o $@ -s /usr/share/gEDA/scheme/print.scm $*.sch
 269
 270 .ps.pdf:
 271         ps2pdf $*.ps
 272
 273 SCHEMATICS_PS=$(SCHEMATICS:.sch=.ps)
 274 SCHEMATICS_PDF=$(SCHEMATICS:.sch=.pdf)
 275
 276 $(PROJECT)-sch.pdf:     $(SCHEMATICS_PDF)
 277         pdfjoin -o $@ $(SCHEMATICS_PDF)
 278
 279 $(PROJECT)-pcb.ps:      $(PROJECT).lht $(CONFIG)
 280         pcb-rnd -x ps --psfile $@ --media Letter --ps-color $(PROJECT).lht
 281
 282 $(PROJECT)-pcb.pdf:     $(PROJECT)-pcb.ps
 283         ps2pdf $(PROJECT)-pcb.ps
 284
 285 $(PROJECT)-big.ps:      $(PROJECT).lht $(CONFIG)
 286         pcb-rnd -x ps --psfile $@ --media Letter --ps-color --fill-page --no-align-marks $(PROJECT).lht
 287
 288 $(PROJECT)-big.pdf:     $(PROJECT)-big.ps
 289         ps2pdf $(PROJECT)-big.ps
 290
 291 pdf:    $(PROJECT)-sch.pdf $(PROJECT)-pcb.pdf $(PROJECT)-big.pdf
 292
 293 attribs: $(AM)/attribs
 294         cp $(AM)/attribs $@
 295
 296 gafrc:
 297         (echo '; empty the library path and populate it with only our own symbols'; \
 298          echo '(reset-component-library)'; \
 299          echo '(load "../altusmetrum/gafrc")') > $@
 300
 301 project.lht: $(AM)/lihata/project.lht
 302         cp $(AM)/lihata/project.lht .
 303
 304 .gitignore: $(AM)/gitignore.in
 305         sed 's/@@PROJECT@@/$(PROJECT)/g' $(AM)/gitignore.in > .gitignore