1 altos (1.0.1) unstable; urgency=low
4 * use multimaint-merge to make Debian changelogs less ugly
5 * update TeleMini turnon script now that we've made a stable firmware release
6 * moving git-buildpackage config into .git/ since it is fairly specific to
7 Bdale's build environment, and doesn't need to be in the source package
8 * get ready for a 1.0.1 release
11 * altos: Clear callsign on initial config load
13 -- Bdale Garbee <bdale@gag.com> Fri, 26 Aug 2011 09:42:35 -0600
15 altos (1.0) unstable; urgency=low
18 * altos: Lost change that reported flight 0 when log memory was full
19 * altosui: Ancient log files used 'apogee' for 'coast' state
20 * altosui: Add 'On-board Data Logging' indicator to pad tab
23 * update changelogs for Debian build
24 * update changelogs for Debian build
27 * altosui: remove debug printf in pad pane
28 * altosui: Disable 'max flight log' config when there are stored flights
29 * altos: Merge common config code in ao_config.c
30 * Bump version to 0.9.7
31 * altos/altosui: Add ability to disable telemetry/rdf completely
32 * altosui: Clean up command line processing. Add --graph
33 * altos-fat/windows: Check and install Java 1.6 as needed
34 * altosui/windows: Fix a bunch of windows compiler warnings.
35 * altosui: Attempt to make both 32- and 64-bit windows DLLs
36 * doc: Add note about telemetry disable mode to 1.0 release notes
37 * doc: Add Installation Recommendations chapter
38 * altosui: Add a few simple unit conversions
39 * altosui: Capture date/time/serial/flight in AltosFlightStats
40 * altosui: Add date/time/serial/flight to flight stats tab
41 * altosui: Show filename in AltosGraph window
42 * altosui: Add --summary option to dump flight stats to stdout
43 * altosui: Make monitor-idle display correct 'On-board data logging' status
44 * altosui: Can't configure flight log max on TeleMini
45 * altosui: fix 'magic' string to signal end of config data
46 * altosui: Only 'show' config dialog once
47 * altosui: Reset all config data on 'reset' command
48 * altosui: Update mac os X library
49 * libaltos: fix Mac OS X function signatures
50 * altosui: add tool-tips to the button box.
53 * turn off auto-tagging during Debian build
54 * update changelogs for Debian build
55 * rewind changelog to 0.9.6.0 for rebuild
56 * update changelogs for Debian build
59 * altosui: Use system look&feel
60 * Remove stale tools (ao-dumplog, ao-postflight, ao-view)
61 * altosui: Add tool-tips to config dialogs
62 * altosui: Try to get dialogs to look a little better
66 * roll changelog back in prep for another test build
67 * update changelogs for Debian build
68 * add pkg-config to the build deps
69 * prepare for another rebuild
70 * update changelogs for Debian build
73 * altosui: Don't trust companion telemetry record 'channels' count
74 * altosui: Make flight monitor font size configurable
75 * altos/windows: Get latest JRE 1.6 version (Version 6 update 27)
78 * doc tweaks through chap 3
81 * doc: Spelling corrections in altusmetrum.xsl
82 * doc: Document pad-mode 'on-board data logging' indicator
88 * doc: Describe packet command mode a bit better.
89 * doc: Move Packet Command Mode section to System Operations chapter
96 * doc: use 'radio link' to refer to packet command mode
102 * doc: Move updating device firmware section to separate chapter
103 * doc: Updating Firmware is now a separate chapter
109 * doc: Move the remaining command-mode descriptions to the appendix
115 * doc: Describe max flight log, ignite mode and pad orientation
116 * doc: Remove duplicate documentation about max flight log
121 * don't deliver sources.list fragment in official Debian packages
122 * changes in preparation for upload to Debian
123 * ao-view is no longer included in the altos package, so have the
124 old-style Debian menu entry point to altosui instead
125 * rewind packaging changelog to last tagged version
126 * update desktop file for consistency with package section
127 * we need a main category in the desktop file
128 * really, I mean it, no longer deliver the sources.list fragment
129 * add a postinst to remove sources.list.d fragment delivered by old
130 private versions of this package, no longer needed once we have
133 -- Bdale Garbee <bdale@gag.com> Thu, 25 Aug 2011 02:22:21 -0600
135 altos (0.9.6.0) unstable; urgency=low
138 * altos: Correct flight log max on Tm to 5k
139 * altosui: Change button to 'Configure Altimeter'
140 * altos: Remove pad_orientation functions from non-accel devices
141 * altos: Add ability to set arbitrary radio frequency
142 * altosui: Add dialogs to configure 'common' frequencies
143 * altosui: Convert from channels to frequencies
144 * Set version to 0.9.5.0
145 * altosui: altimeter is not spelled altimter
146 * altosui: Pull out BlueTooth support
147 * altos: minor type in comment about accel correction
148 * altosui: Must set radio calibration before radio setting
149 * altosui: A few misc cleanups.
150 * altosui: Have single radio_to_frequency function
151 * altosui: Save frequency after setting it in AltosFlightUI
152 * altosui: Show AltosFrequency in scan results
153 * altosui: Remove debugging printfs from AltosSerial
154 * altosui: Flush radio setting to serial device
155 * altosui: Remove unused AltosConfigData from AltosTelemetryReader
156 * altosui: Reading serial from swing thread only bad if remote
157 * altosui: Make set of telemetries to use while scanning configurable
158 * altosui: Add close button to 'fire' dialog
159 * altos: Switch telemini from v0.1 to v1.0
160 * altosui: Don't export product defs from libaltos
161 * altosui: Ensure serial code tracks reply nesting correctly
162 * altosui: Ship TeleMini v1.0 firmware with fat blobs
163 * Altosui: Add flight statistics tab to graph window
164 * altosui: Add a 'Graph Flight' button to the 'landed' tab
165 * altosui: Prune telemetry file graphs to just the flight
166 * altosui: Plot reasonable data from Tm files
167 * altosui: Move launch-sites.txt file to altusmetrum.org
168 * Bump version to 0.9.6.0
169 * doc: Update altusmetrum.xsl for v1.0 software and TeleMini
170 * doc: Document Ignite Mode and Pad Orientation configuration options
171 * doc: Describe 'stats' tab in Graph UI, 'Graph Flight' button.
172 * doc: Add telemetry docs to debian/linux/mac/windows packages
173 * doc: Add release notes, include them in altusmetrum doc. Shuffle altusmetrum
174 * doc: Add 1.0 release notes.
175 * altos: Pull igniter pins low as soon as possible at boot time
176 * altos: Apply igniter boot pulse-width reduction to telemini
177 * altos: remove monitor disable stubs from altimeter code
178 * ao-tools: ao-list was crashing with more than 3 devices connected
179 * libaltos: Mis-allocated device list in libaltos
180 * altos: shrink text space from ao_config.c
181 * altos: re-write a bit of GPS parsing code to reduce size
182 * altos/altosui: Report log format in the version command
183 * altos: Don't try to use non-basestations for remote eeprom download
184 * altos: Add SPI-based companion board support
185 * altos: Put SPI in slower mode when talking to companion board
186 * altos: Make sure companion task exits cleanly when done
187 * altos: add the 'L' command to show the status of a linked companion board
188 * altos: Check for companion init packet validity was busted
189 * altosui: Add companion support to the flight UI and CSV conversion
190 * altos: Send SPI message at flight state changes
191 * altos: Send serial/flight to companion board
192 * altos: wait 10s for companion to boot
193 * altosui: Clean up eeprom parsing a bit
194 * altosui: Add support for TeleScience eeprom download
195 * altosui: Devices with log-format can also delete flights
196 * altosui: Eliminate inter-chunk flush_input calls
197 * altos: AltosSerial.flush_input shouldn't discard Interrupted exceptions
198 * altos: Correct AO_CONFIG_MINOR from 6 to 7
199 * altos: Reset radio channel to zero when using radio setting
200 * altos: use raw height while waiting for landing
201 * altosui: don't set channel when using radio setting
202 * altosui: Respect storage limits in flight log max config
204 -- Bdale Garbee <bdale@gag.com> Fri, 19 Aug 2011 22:47:25 -0600
206 altos (0.9.4.5) unstable; urgency=low
209 * altosui: Mark empty eeprom records 'invalid', don't generate exception
210 * altosui: Always read whole eeprom block, even at end of flight
211 * altosui: Display eeprom parsing errors to user
212 * Revert "src/ao_gps_skytraq.c: Update logging rate to 10Hz"
215 * src/ao_cmd: Shave off bytes from doc strings
218 * altos: Oops. Lost a couple of commands when merging the doc patch
219 * altosui: Missed jcommon.jar in the Mac OS install image
220 * Bump published version number to 0.9.1
221 * aoview: remove -s option.
224 * ao_intflash: Use internal flash for storage
227 * altos: Make serial, usb, beeper and accelerometer optional components
228 * altos/test: Use ao_convert.c instead of hand-coded pres → alt func
229 * altos/test: Add baro-only flight test program
230 * altos: Start with packet slave running. Turn off in pad mode.
231 * altos: Add TeleMini v1.0
234 * ao_intflash: Avoid overwriting code
237 * altos: Switch LED usage for TeleMini around
238 * altos: Switch pins around for TeleMini
239 * bringup: Add script for telemini
240 * ao-load: Make usb descriptor rewriting optional
241 * altos: oops -- altitude reporting wasn't pausing between signals
242 * altos: Internal flash ops block when running from flash
245 * ignore new flight test file
248 * altos: Add tiny logging for TeleMini/TeleNano
249 * altos: Add kalman filters for baro-only boards
250 * altos: Tiny logging fixes. Scan at start, stop when land or full.
251 * altos: Add TeleNano support
254 * fix up script to work and have reasonable texts
257 * altos: Fix mini/nano default log size to available flash space
258 * altos/test: Add scripts to run lots of flights through the code
259 * altos: Write height values to log for nano/mini
260 * altos: Baro-only boards must not detect launch on accel or speed data
261 * altosui: Add software version to Configure AltosUI dialog
262 * altos: Don't init packet slave on TD. Make slave start optional
263 * altos: Configure packet size from send/recv parameters.
264 * altos: Make telemetry interval more consistent
265 * altos: Split out tiny telemetry from full telemetry
266 * altos: Split telenano main from telemini
267 * altos: The kalman code requires a constant sample rate
268 * altos: New telemetry report format (version 4). Supports tiny telemetry.
269 * altos: Add .sdcdbrc file for teledongle
270 * altos: Add nickle kalman implementation.
271 * altos: Switch telemetrum over to kalman filter
272 * altos: Compute a 'trust' value for the barometer
273 * altos/kalman: Kalman terms can be > 1, use 32-bit fixed point
274 * altos: Clean up some debug stuff in ao_flight.c
275 * altos: Add ao_flight_debug code
276 * altos: Missing parens and some bad arithmetic in the kalman code
277 * altos: Fix up flight code testing
278 * altos: Restore sensible kalman values
279 * altos: Ignore alt error for fast->coast. Allow larger error for baro apogee.
280 * altos: Exit flight test at landing. Allow description in test flight list
281 * Add ao_kalman.h to .gitignore
282 * Add description to test flights
283 * altosui: Add support for telemetry version 4
284 * altosui: Add telemetry format menu and preferences
285 * altosui: Remove a bunch of debug printfs from the eeprom manager code
286 * altosui: Add support for downloading TeleMini/TeleNano flight logs
287 * altosui: Remove extra AltosEepromBlock layer
288 * altosui: swing hide/show methods are deprecated
289 * altosui: Allow TM config connection to be canceled.
290 * altos: Variable log rate in full logging code too
291 * altos: full logging must flush pending data before checking state
292 * altosui: Off-by-one error in telemetry format configuration UI
293 * altosui: Allow radio channel to be configured over the radio link
294 * altosui: Tell serial device which frame to use for timeout dialogs
295 * altosui: Handle serial calls from swing thread
296 * altos: Split up flight code into separate flight/sample/kalman bits
297 * altos: Create custom nano flight code
298 * altosui: Clean up packet link connecting dialog
299 * altosui: Make flight log downloading handle 'Connecting...' dialog
300 * altosui: Make deployment testing handle Connecting... dialog
301 * altosui: Display exception messages from swing thread
302 * altosui: Don't display 0000-00-00 for missing flight log dates
303 * altos: ao_sample_preflight was exiting preflight mode immediately
304 * altos: Run RDF beacon after apogee instead of waiting for landing
305 * altos: Enable logging during nano flights
306 * altosui: Parse and export Max flight log value
307 * altosui: Only plot acceleration when present in data file
308 * altos: Reflect ao_flight split in ao_flight_test dependencies
309 * altos: Baro useful ceiling is MSL, not AGL
310 * altos: Make ao_flight_test show true height but report saturated height
311 * altos: Add initial TeleBT code
312 * altos: Add P2SEL_*_MASK defines to cc1111.h
313 * altos: expose set of available stdio values
314 * altos: Provide for a pre-filter on commands
315 * altos: Allow any stdio to be used with packet forwarding
316 * altos: Remove serial monitor command
317 * altos: Make ao_serial_drain public
318 * altos: Clean up usage of serial port for stdio
319 * altos: Clean up serial initialization
320 * altos: Make cmd echo per-connection instead of global
321 * altos: Clean up BT serial communcations
322 * altosui: Add missing AltosTelemetryMap.java file
323 * altos: Use PIO(6) on BTM to monitor BT connection. Fix BTM init.
324 * altosui: Add TeleBT USB device support
325 * altosui: Add low-level Bluetooth APIs
326 * altos/altosui: Log averaged baro sensor data in Tm/Tn
327 * altosui: oops - lost state changes when downloading eeprom data.
328 * altos: Write a few pre-launch samples for Tm/Tn devices
329 * altosui: Add primitive bluetooth device manager UI.
330 * altosui: Create abstract AltosDevice class
331 * altosui: Make AltosBTDevice implement AltosDevice interface
332 * altosui: Make bluetooth dialog modal
333 * altosui: Use persistent list of bluetooth devices for device dialogs
334 * altos: Add delays to bt startup sequence
335 * altosui: Wait two seconds after bluetooth connect XXX
336 * altos: Solidify BT connections
337 * altos: Simplify BT communications
338 * altos: Remove bt debug command
339 * altos: remove BT logging code
340 * altosui: Eliminate ao_cmd_filter hook
341 * altosui: Make flight data download work through TeleBT
342 * altos: add telebt-v0.0 Makefile
343 * altosui: Separate out flash debug code to separate thread
344 * altosui: Fix TeleBT name in flight monitor title
345 * altosui: Display reader name (usually the device) when an I/O error occurs
346 * altosui: Move AltosIgniteUI device open out of Swing thread
347 * altosui: Fix BT manage dialog so that the device lists resize
348 * altos: Add preliminary telebt v0.1 defines
351 * first cut at a telebt turn on script
354 * altos: Add telebt-v0.1 to Makefile
355 * altos: Use USART configuration 1 with flow control for TBT
356 * altos: Fix BT link status pin for real TBT hardware
357 * altos: pull TBT v0.1 ser_reset line low
358 * altos: Add beeper to TBT v0.1
359 * altos: Debugging TBT issues -- check pin configuration after boot
360 * altos: Initialize beeper for telebt
361 * altos: Hook up the P1 ISR for TeleBT v0.1 bt_link line
362 * altos: clear CPU port 1 interrupt flag when handled
363 * Revert "altos: Debugging TBT issues -- check pin configuration after boot"
364 * Switch version to 0.9.4
365 * altosui: Handle old TeleDongle receiving kalman telemetry packets
366 * altos: Rename telemetry to telemetry_orig
367 * altos: Add arbitrary telemetry packet monitoring
368 * altos: Add checksum to TELEM output lines
369 * altos: Start adding new telemetry frame definitions
370 * altos: ao_radio_recv needs byte count *including* rssi and status
371 * altosui: Support raw telemetry from TeleDongle
372 * doc: Add telemetry format description
373 * doc: Complete initial telemetry description
374 * doc: Fix a few minor telemetry doc mistakes
375 * Version strings must be < 8 bytes long
376 * altos: teledongle does not need ao_packet_slave.c
377 * altos: Shrink const space in ao_config
378 * altos: Add sat info to GPS report command
379 * altos: Shrink help text
380 * altos: Add split telemetry code
381 * altos: Complete new telemetry switchover
382 * altosui: Parse remaining standard telemetry packets
383 * doc: Chang Config and Location packets
384 * altos: Adapt to changes in telemetry Configuration packet
385 * doc: Add section about TeleDongle USB line format
386 * altosui: Elide nul bytes at end of telemetry string values
387 * altosui: Elide missing values from graphs
388 * altosui: Add main/drogue voltages to default graph
389 * altosui: Remove debug printf.
390 * altosui: Compress telemetry records marked with the same time
391 * altos: Shrink ao_cmd_put16, ao_cmd_hex and ao_cmd
392 * altos: Shrink ao_config_callsign_set
393 * altos: Shrink ao_add_task by rolling up a memset loop
394 * altos: Switch ao_gps_skytraq and ao_gps_sirf __xdata to __pdata
395 * altos: Switch ao_ignite and ao_gps_sirf __xdata to __pdata
396 * altos: Switch ao_log.c and ao_log_big.c __xdata to __pdata
397 * altos: Switch ao_report.c __xdata to __pdata
398 * altos: Switch ao_rssi.c __xdata to __pdata
399 * altos: Switch ao_sample.c __xdata to __pdata
400 * altos: Switch ao_serial.c __xdata to __pdata
401 * altos: Switch ao_stdio.c __data to __pdata
402 * altos: Switch ao_telemetry.c __xdata to __pdata
403 * altos: Switch ao_usb.c __xdata to __pdata
404 * altos: Switch const for __code in struct ao_cmds
405 * altos: switch ao_cmd __xdata to __pdata
406 * altos: Switch ao_config.c __xdata to __pdata
407 * altos: Switch ao_dbg.c __xdata to __pdata
408 * altos: Switch ao_flight and ao_flight_nano __xdata to __pdata
409 * altos: Switch flash drivers __xdata to __pdata
410 * altos: Switch Tm and Tn to common telemetry code
411 * altos: Remove ao_telemetry_orig.c and ao_telemetry_tiny.c
412 * altos: Ensure low-rate telem packets interleave with sensor telem packets
413 * altos: product defines are always in ao_product.h
414 * altosui: Build device constants into .java code
415 * altosui: Don't show missing igniter and gps values
416 * altos: new versions of sdcc require __ prefixes for custom keywords
417 * Set version to 0.9.4.3 for Bdale 2011-7-16 flights
418 * altosui: Start adding support for scanning radio for available devices
419 * altosui: Pop up monitor window from scan dialog
420 * altosui: Remove debugging printf from AltosLog
421 * altosui: Configuration telemetry record includes flight number
422 * altosui: Finish radio scanning UI
423 * altosui: Generalize and centralize telemetry constants, parse v0.8 telemetry
424 * altosui: Initialize channel and telemetry before use in ScanUI
425 * altosui: Set 'seen' bits in legacy telemetry packet reader
426 * altosui: Add map preloading GUI
427 * altosui: Try to avoid resize weirdness with map preloading
428 * altosui: Flush telemetry lines before starting to watch for scan results
429 * altosui: Display full map preload area in view.
430 * altosui: Remove a bunch of sitemap debugging printfs
433 * altosui: Make sure degree and minute values are visible (map preload)
436 * Set version to 0.9.4.4
437 * altos, altosui: Add igniter mode (dual, apogee, main)
438 * altosui: Download list of site locations for map preloading
439 * altosui: Add launch-sites.txt
440 * altosui: Add a bunch more site locations
441 * altosui: Mark preload site location with red circles (like launch)
442 * Fix NCR Pawnee location
443 * Add HARA Bragg Farms site
444 * altosui: Change continutity colors to yellow/magenta
445 * altos: Add ability to read new TELEM files to ao_flight_test
446 * altos: Average height values for landing detection
447 * altos: Reduce height averaging filter time constant
448 * altos: Require sequencing through 'main' state before landing
449 * altosui: Standard text field in flight UI needs more width (now 20)
450 * altosui: Parse accel cal from 'c s' command
451 * altosui: Simple timeouts don't work with query data
452 * altosui: Add idle monitor dialog
453 * altos/altosui: Add pad orientation configure option
456 * update version for a Bdale build for use turning on TeleMini v1.0
457 * simplify version in last changelog entry so git-dch is less confused
458 * update changelogs for Debian build
459 * update changelogs for Debian build
460 * stop doing automatic tag push during builds
461 * build depend on bluetooth dev package
462 * clean up all existing lintian warnings
463 * rewind changelog for re-build of 0.9.4.5
465 -- Bdale Garbee <bdale@gag.com> Mon, 08 Aug 2011 09:37:04 -0600
467 altos (0.9.1) unstable; urgency=low
470 * ao-load: fix usage message to note that '=' is required for options
471 * altos/test: Add dependencies in the Makefile for ao_flight_test
472 * altos/test: auto-configure acceleration parameters from the log file
475 * ao_radio: generalise setup of packet size
476 * src/ao_gps_skytraq: simplify parsing code
477 * src/ao_gps_skytraq.c: Update logging rate to 10Hz
480 * tie bringup scripts to Bdale's bench TeleDongle
482 -- Bdale Garbee <bdale@gag.com> Fri, 01 Apr 2011 20:02:12 -0600
484 altos (0.9) unstable; urgency=low
488 * update changelogs for Debian build
489 * update turnon script to prefer TeleDongle as programmer
492 * altos: Program default flight log max value for new boards
494 -- Bdale Garbee <bdale@gag.com> Wed, 19 Jan 2011 12:46:47 -0700
496 altos (0.8.1+81+g4ae724f) unstable; urgency=low
498 * we need an install target to prevent parent dir make from failing
500 -- Bdale Garbee <bdale@gag.com> Tue, 18 Jan 2011 23:55:36 -0700
502 altos (0.8.1+79+g9a5666f) unstable; urgency=low
505 * doc: Don't delete telemetrum-outline.pdf
506 * doc: Add v0.9 features from altosui to documentation.
509 * add 0.9 revision entry, with caveat about telemetry format change
510 * freshen copyright year
513 * fat: Add firmware for v1.1 and docs to mac/windows/linux installers
514 * fat: Add docs to Linux package
515 * doc: Build with 'make all' from top level. Build with 'make fat'
517 -- Bdale Garbee <bdale@gag.com> Tue, 18 Jan 2011 23:47:52 -0700
519 altos (0.8.1+71+gda42f40) unstable; urgency=low
522 * doc: Add telemetrum mounting template in svg and pdf forms
525 * Re-order and re-arrange eeprom download dialog
526 * Convert EepromSelect dialog to use a GridBag
527 * Close serial port if Download/Delete dialog is cancelled.
530 * altosui: Reset eeprom download instance variables before reading
532 * altosui: Make serial debug more complete and accurate
533 * altosui: Use long input flush timeout when remote.
534 * altosui: Remove debug message when eeprom downloads are complete.
535 * altosui: Ensure serial device is closed after eeprom download
537 * altosui: Require 4 sats to light up the 'GPS locked' light.
538 * doc: inkscape tracks the filename inside the document
539 * altos: TELEMETRY PROTOCOL CHANGE. Switch to 16-bit serial numbers.
540 * altos: Flush log when full
543 * altos: Restructure skytraq NMEA parsing code to save some space
546 * altos: average 512 accel/baro samples at startup instead of 1000
549 * altos: Added check for an accel value above 1.5g
550 * altos: Added check for out of bounds accel
553 * altos: Add DATA_TO_XDATA to linux test harness
554 * altosui: Remove spurious colons from eeprom selection headers
557 * Rework invalid accel cal detection code
560 * altos: Auto-calibrate linux-based flight testing code
561 * altos: Ensure flight code gets first crack at new ADC data
562 * altos: Sample the accelerometer reference voltage on v1.1 boards
563 * altos: Optimize fetching of ADC data in flight code
564 * altos: Use 5V reference data to correct accelerometer measurements.
565 * doc: Remove mention of ao_wake_task
568 * update documentation to reflect reality that modifying a board for
569 separate pyro battery is not trivial
571 -- Bdale Garbee <bdale@gag.com> Tue, 18 Jan 2011 17:26:33 -0700
573 altos (0.8.1+42+g646e192) unstable; urgency=low
576 * altosui: Show dialog after successful delete or when no flights
577 * altosui: Ensure serial line is flushed after disabling remote link
578 * altosui: Add preference for serial debugging.
580 -- Bdale Garbee <bdale@gag.com> Fri, 14 Jan 2011 18:00:51 -0700
582 altos (0.8.1+37+g97b1ca9) unstable; urgency=low
585 * altos: Add configuration parameter for maximum flight log size
586 * altos: support storage of multiple flights.
587 * altos: Speed up at45 and 25lc erase speeds
588 * altos: white space fix
589 * altos: report flight log offsets in hex block numbers instead of
591 * altos: ensure erase mark is written when erasing flights
594 * altos: Optimize Morse code generation
597 * altos: Check requested log max size against available space
598 * altos: Check for full log and complain
599 * altosui: Add configuration of flight log size
602 * altos: Remove unused accel_vel_mach and accel_vel_boost variables
603 * altos: Remove redundant initialization of ao_interval variables
606 * altosui: Split eeprom download code apart
607 * altos: oops -- 'e' command was only showing 7 of the 8 bytes per
609 * altosui: Add support for parsing list of flights from the 'l'
611 * altosui: Add eeprom 'manage' ui to download and delete multiple
613 * altos: check for valid flight number in ao_log_delete
615 -- Bdale Garbee <bdale@gag.com> Fri, 14 Jan 2011 14:30:37 -0700
617 altos (0.8.1+18+g408a3e0) unstable; urgency=low
620 * altosui: move maps to subdir, fix E/W mismatch
623 * altos: clean up radio abort paths. Share radio code.
624 * altos: eliminate ao_wake_task
625 * windows: Add compatibility IDs to telemetrum.inf
626 * windows: Update NSIS installer file to use compatibility IDs
627 * altos: Split out SPI driver.
628 * altos: Add telemetrum-v1.1 directory
629 * altos: packet and usb i/o routines use 'char', not 'uint8_t'
630 * altos: Simplify storage API
631 * altos: Require manual flight erasing.
632 * altos: Move common storage code to ao_storage.c. Add M25P80 driver
633 * altos: Rip out 'optimization' in ao_log_scan
634 * altos: Mark end of available flight list with 'done' to make the UI
636 -- Bdale Garbee <bdale@gag.com> Fri, 07 Jan 2011 00:51:41 -0700
638 altos (0.8.1+4+gea95c06) unstable; urgency=low
640 * fix symlink paths in rules file
642 -- Bdale Garbee <bdale@gag.com> Wed, 01 Dec 2010 00:14:24 -0700
644 altos (0.8.1+2+gea7130e) unstable; urgency=low
646 * modify Debian package build to deliver one copy of background.png
649 -- Bdale Garbee <bdale@gag.com> Wed, 01 Dec 2010 00:03:14 -0700
651 altos (0.8.1) unstable; urgency=low
654 * moved doc dir in web content to AltOS tree
655 * fix publish target in doc/Makefile
656 * fix section layering
657 * fix an Altos vs Altus typo in the docs
658 * adding Bdale's release process document to the source tree
661 * windows: Add jfreechart.jar and jcommon.jar to windows install image
662 * Move "Releasing" to top level
663 * Add minimal release testing plan to Releasing
668 -- Bdale Garbee <bdale@gag.com> Mon, 29 Nov 2010 21:46:54 -0700
670 altos (0.8) unstable; urgency=low
673 * altosui: Correct windows hardware IDs for nsis installer file
674 * windows: try harder to get windows install to work
675 * windows: remove some non-existent .inf file section references
676 * windows: more .inf file hacking
677 * windows: Bump .inf file version
680 * declaring 0.8 released
681 * update changelogs for Debian build
682 * update changelogs for Debian build
683 * rewind changelog to recover from stupid build failure
685 -- Bdale Garbee <bdale@gag.com> Sun, 28 Nov 2010 18:32:12 -0700
687 altos (0.7.1+168+gcb08bc2) unstable; urgency=low
690 * altosui: Split out flight monitoring to separate window
691 * altosui: Create buttons for main actions
692 * altosui: Fix channel setting at serial open time
693 * altosui: Fix more calls to AltosPreferences.channel()
694 * altosui: Create abstract interface for flight data display
695 * altosui: Add tab UI with 'pad' mode.
696 * altosui: Add ascent, descent and landed tabs
699 * Updated PKGBUILD-git.altos
702 * altos: Use grey leds when unlit - easier to see
705 * use value_font for values
706 * add --replay command line argument
707 * read preferences for --replay
708 * reduce font size for FlightInfoTable
709 * use grayled.png for off
710 * add compass bearing to voice output
711 * add compass bearing during descent
712 * add site map tab, at least for QRS launches
714 * make infotable scrollable, revert its fontsize to 14
715 * pull up maps for arbitrary locations
716 * better error behaviour if no map
719 * first cut at instructions on how to re-flash TM and TD devices based
721 * fold in content from Keith's email on the re-flashing subject
724 * altosui: Add RF calibration to TeleMetrum config dialog
727 * AltosTelemetryReader: actually open serial port
728 * AltosSiteMap: add targeting circles around landing site
731 * continuing to work on the docs
734 * altosui: Eliminate unncessary import altosui lines
735 * altosui: Open serial device at 'new' time. Prohibit duplicate opens.
736 * altosui: Replace flight status table with labels, fix resize.
737 * altosui: With --replay option, exit when replay window is closed
738 * altosui: oops, missed a file in the previous commit
739 * altosui: eliminate menu bar, moving elements to buttons.
740 * altosui: add reboot button to telemetrum configuration UI
743 * add a paragraph about forcing TM back to idle mode if an accel cal
747 * altosui: Add callsign configuration in AltosUI configuration dialog
748 * altosui: Cleanup flight UI layout
749 * altosui: Add igniter status to ascent and descent tabs
752 * altosui: tile site maps
753 * AltosSiteMapTile: autoscale to about 2 nmi per tile
754 * AltosSiteMapTile: adjust centering calculation
755 * AltosSiteMapTile: adjust scale to 1 nmi per tile
758 * altosui: Add igniter ground testing code
759 * altosui: Unify datafile selection to AltosDataChooser
760 * altosui: Clean up global AltosUI configuration settings dialog
761 * doc: Add preliminary altosui documentation
762 * doc: git ignore generated doc files
763 * doc: Document the 'Flash Image' operation.
764 * altosui: Use timeouts to recover from broken packet links.
767 * update turnon scripts to use stashed copies of stable release
771 * altosui: switch channel selector to combo box. Shorten displayed
773 * altosui: When switching log files, don't terminate log thread
774 * altosui: calling thread.interrupt with null thread doesn't work well
775 * altosui: Initialize display thread state in constructor instead of
777 * altosui: Fix channel changing in flight UI to actually work
780 * AltosSiteMap: add autoscroll and grabndrag scroll
781 * AltosSiteMapTile: seperate map and drawing layers
782 * AltosSiteMap: automatic fetching of map data
783 * AltosSiteMapTile: draw boost circle as well as landed
784 * AltosAscent/Descent: tidy up layout
785 * AltosDescent: switch elev from height to range
791 * AltosSiteMap: major refactoring
795 * altosui: change descent tab formatting to four columns
798 * AltosSiteMap: be more polite about preferred size
802 * altosui: Rewrite info table to mix with scroll pane well. Fix
806 * AltosSiteMap: better gps check, lower zoom
809 * altosui: Set site map flight path lines to 6 pixels anti-aliased.
812 * AltosSiteMap: explain tile size better
813 * AltosSiteMap: extend map if rocket goes far away
814 * AltosSiteMap: try to get new tile construction right
815 * AltosSiteMap: thread safe tile addition
816 * AltosSiteMap: refactor tile collection
817 * AltosSiteMap: never accept 0,0 as lat/long
818 * AltosSiteMap: limit nr of tiles to 200x200
821 * altosui: When fixing eeprom gps time information, make GPS data
825 * AltosSiteMap: ensure buffer around active tile
826 * altosui: improve sitemap scrolling behaviour
827 * altosui: keep sitemap more centred on rocket
830 * altos: Add on/off modes to 'C' command
833 * Added PKGBUILDs for deps into contribs
836 * altosui: Close serial port when debug link fails
837 * altos: assume igniter worked.
840 * add a rudimentary --help for command line use
843 * doc: Add internal documentation for AltOS
846 * altosui: don't switch away from user selected tab
847 * altosui: sitemap uses rocket gps if no pad gps
850 * merge Keith's AltosUI documention into "the big book"
851 * lose the placeholder on how GPS works, as it's going to be a
854 * altos: remove unused variable from ao_igniter
855 * altos: Don't abort radio transmissions with ao_radio_abort
856 * altos: Make radio test command careful with the radio mutex.
857 * altosui: Make AltosSerial.flush_input keep reading while non-empty
858 * altosui: New AltosSerial.set_radio function sets channel/call
859 * altosui: Disable radio configation over packet link.
860 * altosui: Let people fire igniters that don't read as 'ready'
861 * altosui: Make sure packet mode is turned off when the connection
865 * docs: Document altosui "Graph Data" button
868 * Move altosui to the top level, placing libaltos inside it.
871 * doc: Document altosui "Site Map" tab
874 * Missing change to top level Makefile to build altosui
877 * fix missing section close in Site Map content
879 * manually fold in documentation work from the master branch
882 * doc: Reformat altos to use sections for each function
883 * doc: Add more authors, fix URL formatting, note that AltosUI
885 * doc: Rename telemetrum-doc as altusmetrum
889 -- Bdale Garbee <bdale@gag.com> Thu, 25 Nov 2010 01:10:18 -0700
891 altos (0.7.1+36+g811ced6) unstable; urgency=low
894 * remove the csv build dep, as that code will be abandoned
897 * altosui: Remove ability to graph data in .csv files
898 * altosui: Separate out jfreechart and jcommon directories
900 -- Bdale Garbee <bdale@gag.com> Wed, 06 Oct 2010 17:47:32 -0600
902 altos (0.7.1+32+g8103432) unstable; urgency=low
904 * add build-dep on libcsv-java
906 -- Bdale Garbee <bdale@gag.com> Wed, 06 Oct 2010 16:25:57 -0600
908 altos (0.7.1+28+gd8a2f4c) unstable; urgency=low
911 * make the column headers comma separated, too, so they align with the
915 * altosui: set default .csv file name in file save dialog
916 * altosui: Remember directory containing firmware files
920 * Add JFreeChart to Makefile.am
923 * altosui: Use recorded ground acceleration when reading eeprom files
924 * altosui: Write raw sensor data to .csv files
925 * altosui: Factor some UI elements into separate classes
926 * altosui: remove unused ReplayThread wrapper classes
927 * altosui: Require 4 sats for 'good' GPS data
928 * altosui: Create iterables for log file scanning. Split out display
930 * altosui: .CSV output: add link quality, gps hdop and sat C/N0
932 * altosui: Deal with eeprom dates going backwards across wrap
935 * Hax0r graphing to support telem/eeprom files
938 * altosui: use Altos constants in graphing code
941 * Add callsign/serial/flight to graph title
944 * altosui: Add KML file export.
947 * add build dep on jfreechart lib
949 -- Bdale Garbee <bdale@gag.com> Wed, 06 Oct 2010 16:19:12 -0600
951 altos (0.7.1) unstable; urgency=low
954 * Add firmware and libaltos to 'fat' target at top-level
955 * altosui: Remove some debug printfs.
956 * altosui: libaltos.so is built with libtool -- it's in
958 * Add --with-fat-dir configure option to publish finished stand-alone
960 * altosui: Fix telemetry file reader to handle tick count wrapping
961 * altosui: Remove debug printfs from AltosTelemetryReader
962 * altosui: Fill in time value of last Eeprom record read from file
963 * altosui: Stop parsing eeprom file after hitting 'landed' state
965 -- Bdale Garbee <bdale@gag.com> Fri, 10 Sep 2010 00:09:02 -0600
967 altos (0.7+96+g48f5799) unstable; urgency=low
970 * altosui: conflating USB product and vendor IDs is a bad idea
972 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 21:29:13 -0600
974 altos (0.7+94+g1ac3d7e) unstable; urgency=low
976 * initial cut at an altosui man page
978 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 20:34:38 -0600
980 altos (0.7+92+g0ea7576) unstable; urgency=low
983 * handle versioning of ihx files (poorly) by just wildcarding the file
987 * altosui: Need to have JVM include path substituted into libaltos
989 * altosui: Store libaltos.so in $(libdir)/altos
990 * altosui: Display error dialog when AltOS JNI library can't be loaded
992 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 20:05:44 -0600
994 altos (0.7+86+g6c0ae7e) unstable; urgency=low
997 * altosui: Add explicit requirement to create classes directory
998 * altosui: fix telemetrum.inf FFFE:000A product names on AMD64 and
1000 * altosui: hack to make JAVAROOT directory get created before javac
1002 * altosui: remove FATJAR from all-local to avoid building fat .jar
1006 * add libtool to build deps
1009 * altosui: Add windows installer build using 'nsis'
1010 * altosui: ignore built files
1011 * altosui: oops. renamed the nsis file to altos-windows.nsi
1012 * icon: add some icons for application programs
1013 * altosui: Add icons to application and Windows menus.
1014 * Use autotools for altosui and libaltos
1015 * altos: add some SDCDB config files
1016 * Ignore libtool files.
1017 * Add version numbers to released files. Set version to 0.7.1
1018 * Add top-level 'fat' target to aid building distribution files
1019 * altosui: Fix windows installer to ship correct files
1020 * altosui: Fix up Mac OSX .zip file
1021 * altosui: Fix linux fat distribution
1022 * altosui: Return AO_LOG_INVALID instead of exception for eeprom files
1023 * altosui: Remove debugging printf from AltosEepromReader
1024 * altosui: Eeprom files contain only one date; save it.
1025 * altosui: Add elevation and range data to main display
1026 * altosui: When replay thread is interrupted, don't make final report
1027 * altosui: Start idle thread after the rocket leaves the pad
1028 * altosui: Add AltosVoice.drain() to wait for queued speech to finish
1029 * altosui: Prevent voice altitude data from queueing up
1030 * altosui: Use local .class files in the classpath
1031 * altosui: Record flight number when scanning file, not when running
1032 * altosui: eeprom files place 'boost' time in the flight number
1034 * altosui: ensure that 'altosui' script is installed. Pass arguments
1037 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 15:43:28 -0600
1039 altos (0.7+53+g59798c6) unstable; urgency=low
1042 * altosui: Abort flashing if debug port isn't working
1043 * altosui: allow flashing to be canceled from the rom config dialog
1044 * altosui: Hide internal rom config UI helper function
1045 * altosui: Remove some debug printfs from AltosRomconfig class
1046 * altosui: Post error dialog on invalid ROM config values.
1047 * altosui: build Mac OS .zip file to include paths
1048 * altosui: Report telemetry CRC errors in UI
1049 * altosui: Deal with altos bug setting radio channel while monitoring
1050 * altosui: Allow 'connect to device' when already connected
1051 * Revert "altosui: Deal with altos bug setting radio channel while
1053 * altosui: Must flush serial line after configuring for telemetry
1054 * altosui: Catch I/O errors on telemetry device, report to user
1056 -- Bdale Garbee <bdale@gag.com> Sat, 04 Sep 2010 00:46:12 -0400
1058 altos (0.7+40+g59a40f6) unstable; urgency=low
1061 * add distclean targets to libaltos and altosui to all Debian package
1062 to build, and clean up other distclean content as needed
1065 * altosui: missed AltosReader.class in the Makefile
1066 * altos: Bounds check Skytraq GPS tracking data array
1067 * altosui: Remove Manifest.txt from git repo as it's built now
1069 -- Bdale Garbee <bdale@gag.com> Thu, 02 Sep 2010 00:44:15 -0400
1071 altos (0.7+28+gd006c5e) unstable; urgency=low
1073 * add runtime dependencies for altos binary package
1075 -- Bdale Garbee <bdale@gag.com> Tue, 31 Aug 2010 00:20:00 -0400
1077 altos (0.7+26+gc35632e) unstable; urgency=low
1079 * don't build all the "fat" jar deliverables by default
1081 -- Bdale Garbee <bdale@gag.com> Mon, 30 Aug 2010 19:37:40 -0600
1083 altos (0.7+23+g25764fc) unstable; urgency=low
1086 * fix up for an 0.7 release
1087 * update changelogs for Debian build
1090 * libaltos: AltusMetrum devices use more than one USB ID.
1091 * altosui: provide separate flush_input/flush_output for serial. deal
1092 with monitor automatically
1093 * altosui: discard invalid lines while reading Eeprom flight data
1094 * libaltos: Mac OS X cannot use 'poll(2)' on serial lines.
1095 * libaltos: Missing OS_LDFLAGS on cjnitest build
1096 * libaltos: cjnitest needs altos_flush now
1097 * altos: flush pending output when terminating packet mode
1098 * altos: Abort radio harder when terminating packet mode.
1099 * altos: shut down packet mode cleanly
1100 * libaltos: Fix windows build.
1101 * libaltos: Improve Makefile
1102 * Update telemetrum.inf to include all current USB ids.
1103 * libaltos: Add pre-built Mac OS X libaltos.dylib
1104 * libaltos: Add pre-built Windows .dll
1105 * altos: Windows sends USB Out packets of 0 length. Ack them.
1106 * libaltos: Use overlapped I/O on windows
1107 * altosui: Build linux, mac and windows archives on Linux
1108 * altosui: build debian-style altosui too
1109 * altosui: Devices with USB id 0x000a always get listed
1112 * continue even if rm's don't have anything to do
1113 * make invocation of 'install' pathless to work on more Unix variants
1114 * add a .gitattributes file, configuring the Mac and Windows binary
1117 -- Bdale Garbee <bdale@gag.com> Mon, 30 Aug 2010 19:07:13 -0600
1119 altos (0.7) unstable; urgency=low
1121 * update changelogs for Debian build
1122 * fix up for an 0.7 release
1124 -- Bdale Garbee <bdale@gag.com> Fri, 27 Aug 2010 22:25:38 -0600
1126 altos (0.6+375+g0bd4cc0) unstable; urgency=low
1128 * fix path to installed shared library
1130 -- Bdale Garbee <bdale@gag.com> Fri, 27 Aug 2010 13:13:14 -0600
1132 altos (0.6+373+gcf65c6b) unstable; urgency=low
1135 * altosui: rename AltosEeprom -> AltosEepromDownload, split out Altos
1137 * altosui: Capture config and version info in .eeprom files
1138 * altosui: Merge gps date and time classes into gps class
1139 * altosui: Clear displayed data rows as needed.
1140 * altosui: Split status and info panels into separate files
1141 * altosui: Explicitly initialize Altos class
1142 * altosui: Split flight record out of telemetry class
1143 * altosui: Compute flight state from eeprom data
1144 * altosui: Add comments to Eeprom reader
1145 * altos: add callsign to packet mode, increase payload to 64 bytes
1146 * altosui: Start adding code to write csv files from eeprom/telem
1148 * ao-dumplog: add --channel option (for use with -R option)
1149 * libaltos: integrate Windows support.
1150 * altosui: Select devices by USB vendor/product ID.
1151 * altos: Define USB product ID in per-product Makefile.defs file
1152 * altosui: Make teledongle callsign configurable
1153 * altosui: Add TeleMetrum configuration
1154 * altosui: Set callsign when fetching eeprom data over the air
1157 * add freetts as a build dep
1158 * working on java packaging details
1161 * altosui: Add .ihx file reading code and stub out flashing UI
1162 * altosui: Add debug dongle API, split flash UI out
1163 * ao-dumplog: Fix --remote and --channel options to actually work
1164 * altosui: pad TM config dialog values to avoid clipping descenders
1165 * libaltos: use pipe to wake up getchar on close. use mutexes
1166 * altosui: Add lots more cc1111 debug interface functions
1167 * altosui: remove debug printf from AltosHexfile
1168 * altosui: flush serial output before waiting for reply
1169 * altosui: Remove debug printf from AltosRomconfig
1170 * altosui: Finish device programming code
1171 * altos: Place rom config variables in fixed location
1172 * altosui: make default Manifest look for built-in freetts
1173 * altosui: Separate out log file choosing dialog to share with CSV
1175 * altosui: refactor logfile chooser dialog to share more code
1176 * altosui: Add ability to create CSV file from telem or eeprom files
1177 * altosui: disable radio monitoring while using serial line for
1179 * altosui: Delay mapping Flash UI until flashing actually starts
1180 * altosui: fetch existing romconfig for flashing
1181 * altosui: always display romconfig ui while flashing
1182 * altosui: write USB serial number string while flashing
1183 * altosui: flush replies from serial link when entering debug mode
1184 * altos: always rebuild ao_product.c to track git version
1185 * altos: print GPS state flags in GPS 'g' command
1186 * altos: mark gps date written only after it gets into eeprom
1187 * altosui: Move number parsing code to Altos general class
1188 * altosui: Add AltosGreatCircle constructors
1189 * altosui: add rssi and distance/dir from pad to CSV files
1190 * altosui: AltosEepromReader was mis-setting boost tick
1191 * altosui: Add support for old (version < 3) telemetry files
1192 * altosui: Serial line is in UTF-8 encoding. Deal with it.
1193 * altosui: When parsing saved telem files, errors shouldn't abort file
1194 * altosui: Remove debug printf from AltosState.java
1195 * altosui: command line args are converted to csv format
1196 * altos: prepare for sdcc 2.9.1
1199 * add a dummy install target
1200 * lose the prebuild hook for now while I'm fumbling
1201 * add install target for libaltos
1202 * add an install target for altosui
1205 * altosui: add elevation and range information
1208 * fix up the wrapper's path to the jar file
1209 * update Debian standards version
1210 * fix permissions on installed jar file, switch from ao-view to
1212 * install altosui man page
1213 * fix man page delivery path
1214 * Revert "lose the prebuild hook for now while I'm fumbling"
1216 -- Bdale Garbee <bdale@gag.com> Fri, 27 Aug 2010 12:40:04 -0600
1218 altos (0.6+303+gb6da90b) unstable; urgency=low
1220 * add freetts as a build dep
1221 * move to science menu
1222 * working on java packaging details
1224 -- Bdale Garbee <bdale@gag.com> Wed, 11 Aug 2010 22:11:28 -0400
1226 altos (0.6+292+g8fc261c) unstable; urgency=low
1228 * see if my new freetts package works
1230 -- Bdale Garbee <bdale@gag.com> Sat, 31 Jul 2010 10:55:21 -0600
1232 altos (0.6+290+g7877496) unstable; urgency=low
1235 * altosui: check for closed serial device before reading
1236 * altosui: Remove unnecessary freetts .jar files
1237 * altosui: Close serial, join reader thread, free altos_file
1238 * altosui: remove debug printf
1239 * libaltos: build with java src encoding UTF8
1240 * altosui: construct Darwin application directory
1241 * Add Mac OS X packaging bits
1242 * altosui: Switch eeprom extension back to .eeprom
1243 * Moved Mac OS packaging to altosui dir
1244 * altosui: remove option to install to alternate volume
1245 * Make altosui test script executable
1247 -- Bdale Garbee <bdale@gag.com> Thu, 29 Jul 2010 13:30:19 -0600
1249 altos (0.6+277+gd184819) unstable; urgency=low
1252 * fix text since TM only has one led to blink
1253 * add swig as a build dep
1254 * add a jdk to the build deps
1257 * When the EP0 IN buffer is full, don't panic, just skip sending
1259 * Add libaltos which talks to USB connected altos devices
1260 * Switch AltosUI to libaltos for device access
1261 * Present list of altos devices in nice format
1263 * Re-enable Linux support for altosui.
1264 * Darwin doesn't have strndup.
1265 * libaltos needs -I. on all systems
1266 * libaltos: make clean remove all built files
1267 * libaltos: build fat 10.5-compatible library
1268 * Add Mac OS X packaging files for altosui
1269 * Add application icons for Mac OS X
1270 * Clean up altosui build a bit
1271 * Remove directories as .class file dependencies; it makes them get
1272 rebuilt all the time
1273 * Java clean ups -- use varargs where possible, remove
1275 * Java voice reporting cleanups.
1276 * Force java source encoding to UTF-8
1277 * Make ao_log_data re-entrant as it is used for both sensor and GPS
1279 * altosui: Catch errors opening USB devices. Limit list to relevant
1281 * Make voice and channel menus work.
1282 * Add voice test command for help in adjusting volume.
1283 * Remove debug printf
1284 * altosui: Add eeprom data capture function. No UI yet.
1285 * altosui: Add progress bar for eeprom downloading status
1286 * altosui: Fix Save flight data monitor layout, add cancel
1287 * altosui: Replace device dialog. Center eeprom monitor.
1288 * altosui: report rocket ground bearing at landing only if known
1289 * Reset GPS ready status when GPS comes unlocked on the pad
1291 -- Bdale Garbee <bdale@gag.com> Thu, 29 Jul 2010 12:50:40 -0600
1293 altos (0.6+236+gcd8aa79) unstable; urgency=low
1296 * Telemetry code was mis-computing RSSI
1297 * Switch DBG pins to GPIO when using any debug commands. Reboot to
1301 * significant documentation update
1302 * add build dep for sndfile
1303 * reflect documentation file name change
1304 * update to latest Debian standards version
1306 -- Bdale Garbee <bdale@gag.com> Tue, 20 Jul 2010 22:24:14 -0600
1308 altos (0.6+224+g4766b13) unstable; urgency=low
1311 * documentation updates from Bob
1314 * Extension to KML output format, and minor bug fix
1317 * ao-view: disable radio telemetry monitoring during channel change
1318 * Add special code for USB panic's.
1319 * ao-postflight: was walking off state.data array
1320 * Abort any in-progress radio operation when changing radio channel
1322 -- Bdale Garbee <bdale@gag.com> Thu, 24 Jun 2010 12:37:34 -0700
1324 altos (0.6+214+g16c4cae) unstable; urgency=low
1327 * updates including a typo fix from Bob Finch to the PKGBUILD-git.altos
1328 * merge a derivative of Bob Finch's mere mortals guide as getting started
1329 * merge the altusmetrum-themes package
1332 * Fix telemetrum.inf, tested by Adrian and Keithp
1333 * Finish basic flight monitoring UI with voice using FreeTTS
1335 -- Bdale Garbee <bdale@gag.com> Tue, 18 May 2010 00:24:40 -0600
1337 altos (0.6+204+g6bd8513) unstable; urgency=low
1339 * lose the quotes since they apparently aren't necessary
1341 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 19:53:58 -0600
1343 altos (0.6+202+gae6854d) unstable; urgency=low
1345 * update desktop file for conformance with current standards
1347 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 17:04:31 -0600
1349 altos (0.6+200+g68eaaa6) unstable; urgency=low
1351 * add initial package build scripts for Arch Linux from Bob Finch
1352 * add desktop file provided by Bob Finch
1354 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 16:44:27 -0600
1356 altos (0.6+195+gcde60f1) unstable; urgency=low
1358 * Revert "Merge remote branch 'remotes/origin/fix-reset'"
1360 -- Bdale Garbee <bdale@gag.com> Thu, 06 May 2010 13:59:16 -0600
1362 altos (0.6+193+g314d27a) unstable; urgency=low
1365 * Don't change dbg clock while changing reset_n. Use 20ms everywhere
1367 -- Bdale Garbee <bdale@gag.com> Thu, 06 May 2010 12:47:51 -0600
1369 altos (0.6+190+g8b6767e) unstable; urgency=low
1372 * Fix all stdio reading functions to be __critical
1373 * Use ao_delay to sleep for 2 seconds instead of trying ao_sleep
1375 -- Bdale Garbee <bdale@gag.com> Wed, 05 May 2010 02:34:06 -0600
1377 altos (0.6+187+g8702f49) unstable; urgency=low
1380 * more text created during SFO->DEN flight
1381 * initial attempt at a telemetrum turn on script .. needs work
1384 * Revert "Add optional 's' command to packet slave to enable/disable
1386 * Disable interrupts while reading from stdin
1388 -- Bdale Garbee <bdale@gag.com> Wed, 05 May 2010 01:52:27 -0600
1390 altos (0.6+180+g99094f0) unstable; urgency=low
1393 * Increase reset switch time to 100ms
1394 * Add optional 's' command to packet slave to enable/disable slave
1396 * More ALtosUI changes
1397 * Autodetect flite voice registration function
1400 * capture work done on SFO->DEN flight
1401 * add some RF usage information from an email reply sent today, and
1404 -- Bdale Garbee <bdale@gag.com> Tue, 27 Apr 2010 00:17:57 -0600
1406 altos (0.6+171+g9394393) unstable; urgency=low
1412 * Only have the slave return a packet if it received one.
1414 -- Bdale Garbee <bdale@gag.com> Sat, 10 Apr 2010 15:01:04 -0600
1416 altos (0.6+168+gc0ee1ae) unstable; urgency=low
1419 * INSTALL file changed by auto tools
1422 * libflite may forget to reference libasound
1424 -- Bdale Garbee <bdale@gag.com> Fri, 09 Apr 2010 00:08:24 -0600
1426 altos (0.6+164+g5c3b6e2) unstable; urgency=low
1429 * Start adding java-based UI
1430 * Add telemetry data parsing code
1431 * Add Windows install .inf file
1432 * Fix windows install file
1433 * Add telem parsing code
1434 * Steal C code from ao-view
1435 * Display table of flight info. gps is not working yet though
1436 * Fix up table formatting
1439 * Clean up GPS data formatting
1440 * Report current gps nsat, not last locked nsat
1441 * Remove GPS data missing from skytraq. Save max height/accel/speed
1442 * Remove unused cell renderer class
1444 * Use RXTX for serial comm. Add logdir preference saving
1445 * Make ao_radio_idle keep trying to get the radio to idle.
1446 * Don't abort the radio when enabling telemetry monitoring
1447 * Clean up some altosui comments
1448 * Switch TeleMetrum from v0.2 to v1.0
1449 * Add Linux device discovery
1450 * Interrupt running replay thread when starting another replay
1451 * serial port read function cannot be interrupted. poll every 1 second
1452 * TD reports "not-connected" when GPS has 0 sats
1453 * Tasks may move in task structure as a result of ao_exit
1454 * Enable telemetry monitoring
1455 * Use 16-bit flite voice (which appears to have changed symbols
1457 * When changing RESET line, delay 20ms
1460 * choose a better set of docbook xsl files
1462 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 19:56:27 -0600
1464 altos (0.6+131+g6629ec5) unstable; urgency=low
1466 * lose the url entirely for now
1468 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:43:01 -0600
1470 altos (0.6+129+g934434f) unstable; urgency=low
1474 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:41:38 -0600
1476 altos (0.6+127+g05ad583) unstable; urgency=low
1478 * need another build dep
1480 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:35:04 -0600
1482 altos (0.6+125+g8f1d47e) unstable; urgency=low
1484 * make lintian happy
1485 * tweak copyright assertion
1486 * crudely incorporate "day in the life" info from web page
1487 * rewrite urls in docbook format
1489 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:28:04 -0600
1491 altos (0.6+119+g00f49c8) unstable; urgency=low
1494 * update changelogs for Debian build
1495 * move gbp.conf into debian/
1496 * initial harness for documentation
1500 * Round radio calibration value instead of truncating
1501 * Document the ao-dumplog '--remote' flag for radio-link downloads
1503 -- Bdale Garbee <bdale@gag.com> Tue, 30 Mar 2010 23:19:15 -0600
1505 altos (0.6+108+g6e61170) unstable; urgency=low
1508 * Need to duplicate new altitude conversion code in aoview.
1510 -- Bdale Garbee <bdale@gag.com> Thu, 04 Mar 2010 17:33:27 -0700
1512 altos (0.6+106+ga1478f6) unstable; urgency=low
1515 * Add ao_radio_xmit to help test boards without flashing them.
1516 * Allow product names to have suffixes (like board revisions)
1517 * Fix and document the ao-rawload --run flag
1519 * Leave .ihx files in the build directory too - easier to debug that way
1520 * Eliminate deadlock when writing config from radio link
1521 * Fix up LED colors for each product.
1522 * Add .gitignore for ao-bringup
1525 * create a turn on script for lighting up TeleDongle v0.2 boards
1527 -- Bdale Garbee <bdale@gag.com> Sat, 27 Feb 2010 17:35:32 -0700
1529 altos (0.6+95+g2f45953) unstable; urgency=low
1531 * update changelogs for Debian build
1532 * conditionalize use of git on executability of /usr/bin/git binary
1534 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 17:30:00 -0700
1536 altos (0.6+88+gdeccc10) unstable; urgency=low
1538 * add gawk as a build dependency since strtonum is a gawk extension
1540 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 16:44:35 -0700
1542 altos (0.6+86+g2491282) unstable; urgency=low
1545 * Disable monitor mode before attempting radio test.
1546 * Ensure that ao_alarm waits at least the specified time
1547 * Remove dbg driver code from telemetrum/teledongle
1548 * Add AT45DBxx1D driver
1549 * Remove green LED and temp sensor from v0.2 code
1550 * Add at45db161d.h header file for new flash part.
1551 * Add 'f' command to display flash status register contents
1552 * Dump more flash parameters for the flash_status command
1553 * Dump config block from read/write config and flash_status commands
1554 * Don't set ao_flash_setup_done until we're actually done.
1555 * Remove flash debugging printfs
1556 * Add simple gps dump command 'g'
1557 * Force idle mode by shorting the SPI clock to ground at boot time.
1558 * Switch to using internal cc1111 temperature sensor
1559 * Missing ao_mutex_put in gps_dump
1560 * Compute daytime using GPS as time base
1561 * Pull in a bit more data for filtering the start of the boost
1562 * Log GPS data on pad after boost detect.
1563 * Change barometer conversion code to shrink conversion table
1564 * Change altos build process to support per-product compile-time
1566 * Update .gitignore files
1567 * Quiet make output.
1568 * Add back stack size checking to altos linking phase
1569 * Must install .map files for ao-load to work
1571 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 14:53:01 -0700
1573 altos (0.6+60+g10d1bbc) unstable; urgency=low
1576 * Use ao_radio_get/ao_radio_put in packet code.
1578 -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 13:53:32 -0700
1580 altos (0.6+58+gbbb152c) unstable; urgency=low
1583 * Re-order config values. Change frequency to cal
1584 * Allow radio calibration to be set from ao-load
1585 * Add --cal to man page
1587 -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 12:05:26 -0700
1589 altos (0.6+53+gcd49847) unstable; urgency=low
1592 * Remove send_serial and serial_baud commands.
1593 * Make ao_cmd_decimal produce both 32 and 16 bit values.
1594 * Add radio calibration configuration.
1596 -- Bdale Garbee <bdale@gag.com> Sat, 05 Dec 2009 11:02:49 -0700
1598 altos (0.6+49+g9a1d7dd) unstable; urgency=low
1601 * Change default callsign to "N0CALL"
1603 -- Bdale Garbee <bdale@gag.com> Fri, 04 Dec 2009 21:01:55 -0700
1605 altos (0.6+47+g4053309) unstable; urgency=low
1607 * fix absolute path in debian/dirs, add Suggests for slim-altusmetrum
1608 * change home URL in control file to be the AltOS page
1610 -- Bdale Garbee <bdale@gag.com> Thu, 26 Nov 2009 11:15:47 -0700
1612 altos (0.6+43+gd6ba07e) unstable; urgency=low
1615 * Decode HDOP data from skytraq GPS
1616 * Document ao-postflight --gps and --kml options.
1617 * Make ao-postflight create filenames using input filenames.
1618 * Make TD print 0000-00-00 for invalid dates.
1619 * Fix --plot arg handling. Add -all option.
1620 * Convert telemetry file GPS satellite information in cc_log_read
1621 * Don't crash if --plot isn't passed on ao-postflight command line
1622 * ao-postflight: compute barometric alt for each GPS position
1623 * ao-postflight: don't try to use missing gps sat data
1624 * Automatically extract flight number for eeprom and telem filenames.
1626 -- Bdale Garbee <bdale@gag.com> Sun, 22 Nov 2009 10:18:26 -0700
1628 altos (0.6+32+g87e6f3e) unstable; urgency=low
1631 * fix typo in comment
1634 * Reduce igniter firing time from 500ms to 50ms.
1635 * Add GPS date/time output to ao-postflight.
1636 * Eliminate SiRF state values from ao-view.
1638 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 13:18:06 -0700
1640 altos (0.6+27+gb0d7e3f) unstable; urgency=low
1643 * Add two-point accelerometer calibration.
1644 * Remove "l" command as ao-dumplong no longer uses it
1645 * Remove "d" command
1646 * Remove "f" command
1647 * Reformat ADC values to show all 16 bits
1648 * ao_flight_test was using accel value for pressure too
1649 * Pass accel calibration over telemetry stream. Telemetry data format
1651 * Add ability to dump eeprom data over radio link.
1652 * In packet master, move USB flush from packet thread to echo thread
1653 * In USB pollchar, wait for packet before re-checking USB out len
1654 * Explicitly use USB I/O routines in packet code
1655 * Flush pending input when switching to remote packet mode
1656 * Stop recording in ao-dumplog after receiving an invalid block
1657 * Move ao_match_word from ao_ignite.c to ao_cmd.c
1658 * Add Watchdog Timer Control register definitions
1659 * Add reboot command.
1660 * Return radio to telemetry settings when packet system closed.
1661 * ao-postflight: fix sloppy gps sat data realloc code (was crashing).
1662 * Loosen tolerances for main->landed transition
1663 * Provide a dummy 'uninstall' target in the src directory.
1664 * Share telemetry parsing code in cc library.
1665 * Enable telemetry receive in ao_view
1666 * Switch order of serial/flight in ao-postflight summary
1667 * Add flight number to telemetry stream.
1668 * Add date to GPS data, captured from GPRMC packet.
1669 * Stop using SiRF state info.
1671 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 11:43:56 -0700
1673 altos (0.6) unstable; urgency=low
1676 * Add support for the SkyTraq GPS unit
1677 * Build two versions of TM, one for SiRF, one for SkyTraq
1678 * Save some DSEG space by marking cmd functions __reentrant
1679 * Add ao_wake_task and ao_exit
1680 * Add keyhole-markup generation for ao-postflight.
1681 * Initial packet bits. Just testing transmission
1682 * Add radio carrier command
1683 * Wait for TX to finish sending data
1685 * Remove reason from ao_dma_abort
1686 * Switch packet code from timer thread to ao_alarm
1687 * Use ao_radio_done to wait for TX to completely finish with packet
1688 * Send SYN packet to set sequence numbers
1690 * Do more flushing in packet test code
1691 * Use ao_alarm for ao_delay so it can be easily interrupted
1692 * Poke master to speed up packet rate when things are busy
1693 * No need to wakeup &ao_tick_count now
1694 * Enable packet-based communcation to command processor
1695 * Add more docs to the README file
1696 * Disable interrupts while removing tasks from task list
1697 * Add ao_usb_pollchar to ao.h
1699 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 16:53:45 -0700
1701 altos (0.5+90+g127c312) unstable; urgency=low
1703 * de-version the libreadline-dev build dependency
1705 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 15:57:29 -0700
1707 altos (0.5+86+g2de548f) unstable; urgency=low
1709 * automate push of updated and tagged master branch during
1710 debian/rules prebuild
1711 * flush repetitive junk out of debian/changelog, and update the
1713 * add support for tagging git repository on each Debian package build
1715 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 16:54:28 -0600
1717 altos (0.5+77+gc57bd7f) unstable; urgency=low
1719 * build for Debian from git
1721 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 15:57:19 -0600