From: Bdale Garbee <bdale@gag.com>
Date: Tue, 18 Dec 2018 03:28:01 +0000 (-0700)
Subject: new knsb batches
X-Git-Url: https://git.gag.com/?p=web%2Fgag.com;a=commitdiff_plain;h=a279a702a300aabad554a88089b669f91b92434e;hp=b800404f7dc354471ae7452960428607269bd113

new knsb batches
---

diff --git a/rockets/research/2018-batch-02.mdwn b/rockets/research/2018-batch-02.mdwn
new file mode 100755
index 0000000..12d7600
--- /dev/null
+++ b/rockets/research/2018-batch-02.mdwn
@@ -0,0 +1,31 @@
+# Batch 2018-batch-02 #
+
+4 grains 80mm long for 54mm cases, with 0.5 inch cores
+
+The is a test batch in preparation for doing a demo for college students on
+Monday.  Since I have a total of 8 casting bases and such for 54mm, doing 4
+now and 4 then ensures I can demo even if the grains aren't quite cured enough
+to pull coring rods by then.
+
+The simulator says we need 200g of fuel per grain, so the batch size will
+be 800g (plus a bit for the pan made up by re-melting previous scraps):
+
+* 65% KNO3, 520g
+* 35% Sorbitol, 280g
+* 1% red iron oxide, 8g, added after melt
+* 12 drops Polystep-B1, added before pour using eye dropper
+
+This formula is completely fluid with 225F indicated on the Presto Multicooker,
+but viscosity is noticeabley lower making for easier pouring at 250-275F.
+
+Grain fill lines 73.6mm from the bottom of the casting tube.
+
+These grains were cast on 2018-12-15.
+
+## Results ##
+
+* Grain 1, g gross, g casting tube, g net propellant
+* Grain 2, g gross, g casting tube, g net propellant
+* Grain 3, g gross, g casting tube, g net propellant
+* Grain 4, g gross, g casting tube, g net propellant
+
diff --git a/rockets/research/2018-batch-03.mdwn b/rockets/research/2018-batch-03.mdwn
new file mode 100755
index 0000000..2bccfd6
--- /dev/null
+++ b/rockets/research/2018-batch-03.mdwn
@@ -0,0 +1,28 @@
+# Batch 2018-batch-02 #
+
+4 grains 80mm long for 54mm cases, with 0.5 inch cores
+
+These grains were cast as a demo for college students on Monday. 
+
+The simulator says we need 200g of fuel per grain, so the batch size will
+be 800g (plus a bit for the pan made up by re-melting previous scraps):
+
+* 65% KNO3, 520g
+* 35% Sorbitol, 280g
+* 1% red iron oxide, 8g, added after melt
+* 12 drops Polystep-B1, added before pour using eye dropper
+
+This formula is completely fluid with 225F indicated on the Presto Multicooker,
+but viscosity is noticeabley lower making for easier pouring at 250-275F.
+
+Grain fill lines 73.6mm from the bottom of the casting tube.
+
+These grains were cast on 2018-12-17.
+
+## Results ##
+
+* Grain 1, g gross, 5.78g casting tube, g net propellant
+* Grain 2, g gross, 5.82g casting tube, g net propellant
+* Grain 3, g gross, 5.78g casting tube, g net propellant
+* Grain 4, g gross, 5.80g casting tube, g net propellant
+
diff --git a/rockets/research/2018-batch-04.mdwn b/rockets/research/2018-batch-04.mdwn
new file mode 100755
index 0000000..3926a7b
--- /dev/null
+++ b/rockets/research/2018-batch-04.mdwn
@@ -0,0 +1,28 @@
+# Batch 2018-batch-02 #
+
+4 grains 80mm long for 54mm cases, with 0.5 inch cores
+
+These grains were cast by college students after I did a demo batch.
+
+The simulator says we need 200g of fuel per grain, so the batch size will
+be 800g (plus a bit for the pan made up by re-melting previous scraps):
+
+* 65% KNO3, 520g
+* 35% Sorbitol, 280g
+* 1% red iron oxide, 8g, added after melt
+* 12 drops Polystep-B1, added before pour using eye dropper
+
+This formula is completely fluid with 225F indicated on the Presto Multicooker,
+but viscosity is noticeabley lower making for easier pouring at 250-275F.
+
+Grain fill lines 73.6mm from the bottom of the casting tube.
+
+These grains were cast on 2018-12-17.
+
+## Results ##
+
+* Grain 1, g gross, 5.78g casting tube, g net propellant
+* Grain 2, g gross, 5.87g casting tube, g net propellant
+* Grain 3, g gross, 5.83g casting tube, g net propellant
+* Grain 4, g gross, 5.79g casting tube, g net propellant
+