X-Git-Url: https://git.gag.com/?p=web%2Fgag.com;a=blobdiff_plain;f=rockets%2Fresearch%2F2018-batch-01.mdwn;h=acc163b00918adf4cd53e7844b7484f88bf65b6f;hp=4f18b0f6f2e335e4afc410d4c9993031ecc4bf01;hb=90e1b5caf85cc5de5aed5eddd909d88eae992c5f;hpb=142785b43ac8b1ab712b476ff9f99dee488a5940

diff --git a/rockets/research/2018-batch-01.mdwn b/rockets/research/2018-batch-01.mdwn
index 4f18b0f..acc163b 100755
--- a/rockets/research/2018-batch-01.mdwn
+++ b/rockets/research/2018-batch-01.mdwn
@@ -26,20 +26,25 @@ batch size of 5kg:
 This formula is completely fluid with 225F indicated on the Presto Multicooker,
 but viscosity is noticeabley lower making for easier pouring at 250-275F.
 
-These grains were cast on <date>.
+Grain fill lines 120.6mm from the bottom of the casting tube.
+
+These grains were cast on 2018-07-05.
 
 ## Results ##
 
-Average casting tube weight <mumble>g.
+Had to cut about 11mm length off one grain to make things fit, chose to do
+this to the grain with rough core.
 
-* Grain 1, g gross, g net
-* Grain 2, g gross, g net
-* Grain 3, g gross, g net
-* Grain 4, g gross, g net
-* Grain 5, g gross, g net
-* Grain 6, g gross, g net
-* Grain 7, g gross, g net
+* Grain 1, 670g gross, 17.63g casting tube, g net propellant
+* Grain 2, 668g gross, 17.55g casting tube, g net propellant
+* Grain 3, 674g gross, 17.72g casting tube, g net propellant
+* Grain 4, 672g gross, 17.76g casting tube, g net propellant	*** pre trim ***
+* Grain 4, 610g gross, 17.76g casting tube, g net propellant
+* Grain 5, 664g gross, 17.70g casting tube, g net propellant
+* Grain 6, 666g gross, 17.61g casting tube, g net propellant
+* Grain 7, 668g gross, 17.64g casting tube, g net propellant
 
+Average casting tube weight <mumble>g.
 Total propellant load <mumble>g.  
 
 Revised simulation says this will be...