X-Git-Url: https://git.gag.com/?p=web%2Fgag.com;a=blobdiff_plain;f=homeshop%2Fcncfpga%2Findex.mdwn;h=2f847d512b91f697b18d74535054d2111df92cc9;hp=ee517918b8415f224256f56aac8d4938dbc97fe1;hb=94675b7d96b8658b5c9dda6fedd66597a8e8881c;hpb=93033fe61fa4edf38c5a3f01ef7a0f6c088a382c
diff --git a/homeshop/cncfpga/index.mdwn b/homeshop/cncfpga/index.mdwn
index ee51791..2f847d5 100644
--- a/homeshop/cncfpga/index.mdwn
+++ b/homeshop/cncfpga/index.mdwn
@@ -7,6 +7,15 @@ I converted to servo-based CNC operation. It is compatible with the
[Pluto-P](http://www.knjn.com/FPGA-Parallel.html)
[servo driver](http://linuxcnc.org/docs/html/drivers_pluto_p.html) in EMC2.
+These are photos of the first prototype raw boards:
+
+ 
+ 
+
+And here's a photo of one of them loaded:
+
+ 
+
## Features ##
### User View ###
@@ -19,7 +28,7 @@ I converted to servo-based CNC operation. It is compatible with the
* dual-color LED, green when PC heartbeat present, red when not
* green LEDs on each of the three power supply rails
* RC low-pass filtering on all input pins
-* 5.1 x 2.5 inch 4-layer board
+* 5.1 x 2.5 inch 4-layer board, fits in Hammond 1590P1 die-cast aluminum box
### Developer View ###
@@ -36,6 +45,16 @@ I converted to servo-based CNC operation. It is compatible with the
The design files can be found on [git.gag.com](http://git.gag.com) in the
project [hw/cncfpga](http://git.gag.com/?p=hw/cncfpga;a=summary).
+## Issues ##
+
+Notes about things learned or observed during debugging:
+
+* The RC networks for the input pins are closer to the stacked 15-pin
+ connectors than I'm really comfortable with. Nothing is making contact or
+ shorting, but I'd be tempted to increase the spacing on a future board cut.
+
## Future Plans ##
-As of December 2011, version 0.1 is out for circuit board fabrication.
+As of late December 2011, the first prototype v0.1 board has been loaded and
+is being debugged and tested. If the board "works for me", then I'm likely
+to make enough of these to sell to others who are interested.
+
+And here's a photo of one of them loaded:
+
+ 
+
## Features ##
### User View ###
@@ -19,7 +28,7 @@ I converted to servo-based CNC operation. It is compatible with the
* dual-color LED, green when PC heartbeat present, red when not
* green LEDs on each of the three power supply rails
* RC low-pass filtering on all input pins
-* 5.1 x 2.5 inch 4-layer board
+* 5.1 x 2.5 inch 4-layer board, fits in Hammond 1590P1 die-cast aluminum box
### Developer View ###
@@ -36,6 +45,16 @@ I converted to servo-based CNC operation. It is compatible with the
The design files can be found on [git.gag.com](http://git.gag.com) in the
project [hw/cncfpga](http://git.gag.com/?p=hw/cncfpga;a=summary).
+## Issues ##
+
+Notes about things learned or observed during debugging:
+
+* The RC networks for the input pins are closer to the stacked 15-pin
+ connectors than I'm really comfortable with. Nothing is making contact or
+ shorting, but I'd be tempted to increase the spacing on a future board cut.
+
## Future Plans ##
-As of December 2011, version 0.1 is out for circuit board fabrication.
+As of late December 2011, the first prototype v0.1 board has been loaded and
+is being debugged and tested. If the board "works for me", then I'm likely
+to make enough of these to sell to others who are interested.