X-Git-Url: https://git.gag.com/?p=web%2Fgag.com;a=blobdiff_plain;f=bdale%2Fblog%2Fposts%2FTeleMetrum_Progress.mdwn;h=da6fd8ae6f5c6b12f6699f28db1e02d0fea7017c;hp=f313fb511ecdad26f4c7e4943f803034d5f568dd;hb=c6dd213a0f4ba0e6f03e36b6097032b217e76097;hpb=1e6be95a5182519cc0eb2b2ee20ca02d0837d8c9

diff --git a/bdale/blog/posts/TeleMetrum_Progress.mdwn b/bdale/blog/posts/TeleMetrum_Progress.mdwn
index f313fb5..da6fd8a 100644
--- a/bdale/blog/posts/TeleMetrum_Progress.mdwn
+++ b/bdale/blog/posts/TeleMetrum_Progress.mdwn
@@ -21,22 +21,22 @@ We're now hard at work on a "next version" of the hardware, incorporating
 everything we've learned so far.  There are a number of significant changes 
 planned:
 
- 	* Fully integrated, on-board GPS receiver and patch antenna, with
-	support for off-board amplified antennas when airframe geometry
-	or materials demand it.
+* Fully integrated, on-board GPS receiver and patch antenna, with
+  support for off-board amplified antennas when airframe geometry
+  or materials demand it.
 
-	* A change in the design of the circuit for firing e-matches to 
-	ignite ejection charges that will improve mechanical reliability, 
-	plus explicit support for using a separate pyro battery if desired.
+* A change in the design of the circuit for firing e-matches to 
+  ignite ejection charges that will improve mechanical reliability, 
+  plus explicit support for using a separate pyro battery if desired.
 
-	* Inclusion of a "companion board interface" that we envision using
-	for a pyro channel expansion board to support staging and air 
-	starts, among other things.
+* Inclusion of a "companion board interface" that we envision using
+  for a pyro channel expansion board to support staging and air 
+  starts, among other things.
 
-	* Dramatic increase in the capacity of the on-board data logging memory.
+* Dramatic increase in the capacity of the on-board data logging memory.
 
-	* Changes in connector series to eliminate our dependency on expensive
-	crimping tools for making cables.
+* Changes in connector series to eliminate our dependency on expensive
+  crimping tools for making cables.
 
 To make all this fit, I'm stretching the board an extra 1/4 inch to a total 
 outline of 1 by 2.75 inches.  We're also moving all the connectors, the GPS