* [Giant Leap](http://giantleaprocketry.com/) Pinnacle 54mm nose cone
* 1/8 inch birch plywood fins in a custom shape, with rounded edges
* 1/4 inch birch plywood centering rings and bulkheads, CNC milled, the two
-that hold the fins are notched for perfect fin alignment.
+ that hold the fins are notched for perfect fin alignment.
+* fin can foamed with Mega-Foam from Giant Leap
## Build
Construction began the weekend of 11-13 September 2009.
+## Publicity
+
+RG-1 is featured on the 108G57 Classic motor page of the
+[Cesaroni Pro29 catalog](http://www.pro38.com/pdfs/Pro29Catalog.pdf)!
+
## Flights
-First flown at NCR's Oktoberfest 2009.
+First flown at NCR's Oktoberfest 2009.
+
+The
+[first flight](http://www.flickr.com/photos/bdale/3985543348/in/set-72157618450890674/)
+was on a Cesaroni Pro29 84G88 Smoky Sam, with the MAWD configured
+for apogee-only electronic deployment with full-delay motor ejection as
+backup. A mistake in the wiring (copied from Bdale, who made the same mistake
+in Trick-o-Treat!) caused apogee ejection to be from the motor backup, with
+the MAWD observed to fire its ejection charge at the programmed main altitude.
+
+After fixing the wiring issue, the
+[second flight](http://www.flickr.com/photos/bdale/3985322188/in/set-72157618450890674/)
+was on a Cesaroni
+Pro29 108G57 Classic, again with apogee-only electronic deployment and
+full-delay motor ejection as backup. This flight went perfectly, with ejection
+at apogee and a puff of smoke seen a few seconds later from the motor ejection.
+
+Robert then reconfigured for electronic dual deployment, and flew a textbook
+perfect first-ever
+[dual deploy flight](http://www.flickr.com/photos/bdale/3984564721/in/set-72157618450890674/)
+as the last flight of the event on another Pro29 108G57 Classic motor.
+
+At Hudson Ranch on 2009.11.21, Robert had another perfect dual deploy, this
+time on a Cesaroni Pro29 G73SK demo motor.
+
projects / web / gag.com / blobdiff