another fun quote stumbled over on FB, of all places
[web/gag.com] / rockets / research / 2019.05.21.mdwn
1 # Batch 2019.05.21 #
2
3 A total of 16 Terry-length Everclear grains for 54mm cases, with 0.625 inch 
4 cores, cast as 2 batches of 4 6-inch-long double grains with 0.5" delrin 
5 coring rods, then cut, cored, and trimmed.  Grains 1..8 cast by Bdale, grains
6 9..16 cast by Jamie and Luke with Terry observing.
7
8 The 54mm casting tube I'm using weighs 1.84g per inch.
9
10 Third time mixing APCP propellant.  Bdale again used the 4.5qt mixer, Jamie
11 and Luke used Terry's mixer, all hand packed with no vacuum processing.  Same 
12 formula as previously, but with quantities doubled.
13
14 Most materials measured with Bdale's new 600g by 0.01g scale, R45 measured
15 straight into mixing bowls using Terry's larger scale that goes by 1g.
16
17 These grains were cast on 2019-05-21.
18
19 ## Results ##
20
21 The batch size was pretty good, there was a bit of excess propellant in each
22 batch so we can make density and burn rate measurements after cure.  The excess
23 weighed in at g after cure.
24
25 * Grain 1, " long, g gross, g casting tube, g net
26 * Grain 2, " long, g gross, g casting tube, g net
27 * Grain 3, " long, g gross, g casting tube, g net
28 * Grain 4, " long, g gross, g casting tube, g net
29 * Grain 5, " long, g gross, g casting tube, g net
30 * Grain 6, " long, g gross, g casting tube, g net
31 * Grain 7, " long, g gross, g casting tube, g net
32 * Grain 8, " long, g gross, g casting tube, g net
33
34 * Grain 9, " long, g gross, g casting tube, g net
35 * Grain 10, " long, g gross, g casting tube, g net
36 * Grain 11, " long, g gross, g casting tube, g net
37 * Grain 12, " long, g gross, g casting tube, g net
38 * Grain 13, " long, g gross, g casting tube, g net
39 * Grain 14, " long, g gross, g casting tube, g net
40 * Grain 15, " long, g gross, g casting tube, g net
41 * Grain 16, " long, g gross, g casting tube, g net
42
43 The mass per unit length was within ?g/inch.
44