From: Bdale Garbee <bdale@gag.com>
Date: Tue, 17 Nov 2020 18:09:37 +0000 (-0700)
Subject: fix typo
X-Git-Url: https://git.gag.com/?p=web%2Faltusmetrum;a=commitdiff_plain;h=7711d96253c1c44b72cf528db8db0184e3c16d68

fix typo
---

diff --git a/EasyMotor/index.mdwn b/EasyMotor/index.mdwn
index 0a6746b..170d231 100644
--- a/EasyMotor/index.mdwn
+++ b/EasyMotor/index.mdwn
@@ -28,7 +28,7 @@ way through the closure, then drill and tap 1/8 NPT female threads part way
 through the closure thickness.  The hole gets filled with grease and the 
 sensor screwed in.  
 
-The first example is a 98mm snap-ring clossure, with the 
+The first example is a 98mm snap-ring closure, with the 
 sensor and electronics mounted off-center so a 3/8" all-thread could be used
 in the center for motor retention in a minimum-diameter-ish airframe.  The
 mounting bracket for the electronics was bent from a bit of 1/16" aluminum