| 2022-01-19 |
Bdale Garbee | rationalize CC1310 symbol name cc1310 |
commit | commitdiff | tree | snapshot |
| 2021-08-25 |
Bdale Garbee | move UART0 RX/TX to pins that work with internal serial... fab-v4.0-proto-1 |
commit | commitdiff | tree | snapshot |
| 2021-08-22 |
Bdale Garbee | add a 2N2222 switch for the beeper, switching beeper... |
commit | commitdiff | tree | snapshot |
| 2021-08-22 |
Bdale Garbee | move beeper to a high-current pin on the CC1310 |
commit | commitdiff | tree | snapshot |
| 2021-08-22 |
Bdale Garbee | move LEDs to high-current pins on the CC1310 |
commit | commitdiff | tree | snapshot |
| 2021-08-22 |
Bdale Garbee | update route to reflect Keith's suggested LPC pin chang... |
commit | commitdiff | tree | snapshot |
| 2021-08-21 |
Keith Packard | Move reset_n to LPC PIO0_4, a true open-drain pin |
commit | commitdiff | tree | snapshot |
| 2021-08-21 |
Bdale Garbee | add ground plane "wings" around SMA connector on smt... |
commit | commitdiff | tree | snapshot |
| 2021-08-21 |
Bdale Garbee | route complete and drc clean-ish |
commit | commitdiff | tree | snapshot |
| 2021-08-20 |
Bdale Garbee | getting there! |
commit | commitdiff | tree | snapshot |
| 2021-08-20 |
Bdale Garbee | fix copyright glyph |
commit | commitdiff | tree | snapshot |
| 2021-08-20 |
Bdale Garbee | work in process |
commit | commitdiff | tree | snapshot |
| 2021-08-20 |
Bdale Garbee | work in progress |
commit | commitdiff | tree | snapshot |
| 2021-08-19 |
Bdale Garbee | work in progress |
commit | commitdiff | tree | snapshot |
| 2021-08-19 |
Bdale Garbee | work in progress |
commit | commitdiff | tree | snapshot |
| 2021-08-13 |
Bdale Garbee | flush planes, clearing short errors .. will re-create... |
commit | commitdiff | tree | snapshot |
| 2021-08-13 |
Bdale Garbee | update telemetrum.lht to latest file format, 11071... |
commit | commitdiff | tree | snapshot |
| 2021-08-08 |
Bdale Garbee | work in progress .. more placement to figure out |
commit | commitdiff | tree | snapshot |
| 2021-08-08 |
Bdale Garbee | hooked up all the stuff to SOC pins .. re-mappings... |
commit | commitdiff | tree | snapshot |
| 2021-08-08 |
Bdale Garbee | UHF RF section captured |
commit | commitdiff | tree | snapshot |
| 2021-08-07 |
Bdale Garbee | updated schematic work in progress |
commit | commitdiff | tree | snapshot |
| 2020-09-18 |
Bdale Garbee | rationalize screw strip value against preferred-parts v3.0 |
commit | commitdiff | tree | snapshot |
| 2020-09-18 |
Bdale Garbee | move LDO bulk cap to same 1206 footprint part used... |
commit | commitdiff | tree | snapshot |
| 2020-05-18 |
Bdale Garbee | let attribs be automatically handled |
commit | commitdiff | tree | snapshot |
| 2019-10-03 |
Bdale Garbee | move to MAX-8Q GPS module, fix ADXL375 metadata fab-v3.0 |
commit | commitdiff | tree | snapshot |
| 2019-10-03 |
Bdale Garbee | drop 'boot0' netname now that resistor is gone, so... |
commit | commitdiff | tree | snapshot |
| 2019-09-26 |
Keith Packard | Add slots in outline layer for USB connector stakes keithp-master |
commit | commitdiff | tree | snapshot |
| 2019-09-25 |
Bdale Garbee | pcb passes DRC now |
commit | commitdiff | tree | snapshot |
| 2019-09-17 |
Bdale Garbee | update copyright year and board version in silk |
commit | commitdiff | tree | snapshot |
| 2019-08-16 |
Bdale Garbee | route complete, needs DRC and DFM work yet |
commit | commitdiff | tree | snapshot |
| 2019-08-16 |
Bdale Garbee | updated parts placement on pcb .. not routed yet |
commit | commitdiff | tree | snapshot |
| 2019-08-16 |
Bdale Garbee | move to 4ucon 11071 micro USB connector |
commit | commitdiff | tree | snapshot |
| 2019-08-16 |
Bdale Garbee | move to ADXL375 |
commit | commitdiff | tree | snapshot |
| 2019-08-16 |
Bdale Garbee | working on TeleMetrum v3.0 .. first step, move to cc1200 |
commit | commitdiff | tree | snapshot |
| 2019-08-16 |
Bdale Garbee | move workflow from gEDA to lepton-eda -> pcb-rnd |
commit | commitdiff | tree | snapshot |
| 2019-07-27 |
Keith Packard | Switch pyro series resistors to 1k |
commit | commitdiff | tree | snapshot |
| 2019-05-08 |
Bdale Garbee | should at least move the schematic version assertion... |
commit | commitdiff | tree | snapshot |
| 2018-04-01 |
Bdale Garbee | drop lipo charge current to 400mA |
commit | commitdiff | tree | snapshot |
| 2018-03-15 |
Bdale Garbee | deliver both silkscreens |
commit | commitdiff | tree | snapshot |
| 2017-08-07 |
Bdale Garbee | be consistent about thermaling mounting holes on UHF... |
commit | commitdiff | tree | snapshot |
| 2015-10-26 |
Bdale Garbee | move to preferred parts database fab-v2.0b2 |
commit | commitdiff | tree | snapshot |
| 2015-10-26 |
Bdale Garbee | more attribute updates for preferred parts |
commit | commitdiff | tree | snapshot |
| 2015-10-26 |
Bdale Garbee | regularize metadata on saw filter for preferred parts... |
commit | commitdiff | tree | snapshot |
| 2015-10-26 |
Bdale Garbee | move to new attribs file for preferred parts database |
commit | commitdiff | tree | snapshot |
| 2014-10-26 |
Keith Packard | Buy STM32L151CBU6 from newark |
commit | commitdiff | tree | snapshot |
| 2014-10-26 |
Keith Packard | Switch to Mouser for LM293QT parts fab-v2.0b |
commit | commitdiff | tree | snapshot |
| 2014-10-26 |
Keith Packard | Update 5.1pF and 10pF caps to available Murata part... |
commit | commitdiff | tree | snapshot |
| 2014-10-26 |
Bdale Garbee | update copyright year in the silk |
commit | commitdiff | tree | snapshot |
| 2014-09-15 |
Bdale Garbee | move GPS chip and SAW filter 30 mils farther from GPS... |
commit | commitdiff | tree | snapshot |
| 2014-02-15 |
Bdale Garbee | add code to emit pdf schematics and artwork |
commit | commitdiff | tree | snapshot |
| 2014-01-16 |
Bdale Garbee | update BOM to reflect actual accel part we're using |
commit | commitdiff | tree | snapshot |
| 2013-12-27 |
Bdale Garbee | pull inner layers back 15 mils from board edge per AC fab-v2.0 |
commit | commitdiff | tree | snapshot |
| 2013-12-27 |
Bdale Garbee | update capacitor part numbers to match currently availa... |
commit | commitdiff | tree | snapshot |
| 2013-12-19 |
Bdale Garbee | lose the "pad" in the GPS patch footprint quote-v2.0 |
commit | commitdiff | tree | snapshot |
| 2013-12-19 |
Bdale Garbee | mark all through-hole parts as no-load for AC build... |
commit | commitdiff | tree | snapshot |
| 2013-12-11 |
Bdale Garbee | forward annotate component attributes to pcb file |
commit | commitdiff | tree | snapshot |
| 2013-12-11 |
Bdale Garbee | update PCB silk to say version 2.0 |
commit | commitdiff | tree | snapshot |
| 2013-12-11 |
Bdale Garbee | update u-blox part number |
commit | commitdiff | tree | snapshot |
| 2013-12-09 |
Bdale Garbee | use 4ucon screw terminal strip, cheaper patch that... |
commit | commitdiff | tree | snapshot |
| 2013-08-20 |
Keith Packard | Route beeper pin change |
commit | commitdiff | tree | snapshot |
| 2013-08-20 |
Bdale Garbee | hook beeper to a timer output at Keith's request |
commit | commitdiff | tree | snapshot |
| 2013-08-12 |
Keith Packard | Add DK and Mouser BOM generators |
commit | commitdiff | tree | snapshot |
| 2013-08-09 |
Bdale Garbee | clean up silk, etc fab-phoenix |
commit | commitdiff | tree | snapshot |
| 2013-08-09 |
Bdale Garbee | fix stm footprint via clearance issue, etc |
commit | commitdiff | tree | snapshot |
| 2013-08-09 |
Bdale Garbee | significant placement and copper rework in the UHF... |
commit | commitdiff | tree | snapshot |
| 2013-08-08 |
Bdale Garbee | more copper shoving |
commit | commitdiff | tree | snapshot |
| 2013-08-08 |
Keith Packard | Move SPI bus wiring from E of cc1120 to W. |
commit | commitdiff | tree | snapshot |
| 2013-08-08 |
Keith Packard | Add more grounding under 70cm RF section |
commit | commitdiff | tree | snapshot |
| 2013-08-08 |
Bdale Garbee | a number of copper tweaks .. more to do tomorrow |
commit | commitdiff | tree | snapshot |
| 2013-08-07 |
Keith Packard | Change comparator dividers to hit 3.52V v_ldo_in before... |
commit | commitdiff | tree | snapshot |
| 2013-08-07 |
Keith Packard | Change resistors to panasonic. Change LED current limit... |
commit | commitdiff | tree | snapshot |
| 2013-08-06 |
Keith Packard | Split power plane to provide ground under 70cm RF section |
commit | commitdiff | tree | snapshot |
| 2013-08-05 |
Keith Packard | route complete |
commit | commitdiff | tree | snapshot |
| 2013-08-05 |
Keith Packard | Clean up DRC errors |
commit | commitdiff | tree | snapshot |
| 2013-08-05 |
Keith Packard | Checkout - 16 rats left, but a few DRC errors |
commit | commitdiff | tree | snapshot |
| 2013-08-05 |
Keith Packard | Swapped the comparator slots |
commit | commitdiff | tree | snapshot |
| 2013-08-05 |
Keith Packard | Finish first route of SPI links to flash. Route USB. |
commit | commitdiff | tree | snapshot |
| 2013-08-05 |
Keith Packard | Routed GPS serial and MS5607 SPI lines. |
commit | commitdiff | tree | snapshot |
| 2013-08-05 |
Bdale Garbee | thermal the other two mounting holes |
commit | commitdiff | tree | snapshot |
| 2013-08-05 |
Bdale Garbee | update pcb to reflect removal of C600 |
commit | commitdiff | tree | snapshot |
| 2013-08-05 |
Bdale Garbee | Merge branch 'master' of ssh://git.gag.com/scm/git... |
commit | commitdiff | tree | snapshot |
| 2013-08-05 |
Bdale Garbee | omit spurious bypass cap |
commit | commitdiff | tree | snapshot |
| 2013-08-05 |
Keith Packard | Keithp's attempt at starting to route this board |
commit | commitdiff | tree | snapshot |
| 2013-08-04 |
Bdale Garbee | snapshot |
commit | commitdiff | tree | snapshot |
| 2013-08-04 |
Bdale Garbee | the CPU is a lot cheaper at Avnet than at DK |
commit | commitdiff | tree | snapshot |
| 2013-08-04 |
Bdale Garbee | switch to taoglas 18.4 patch |
commit | commitdiff | tree | snapshot |
| 2013-08-01 |
Bdale Garbee | snapshot |
commit | commitdiff | tree | snapshot |
| 2013-05-30 |
Bdale Garbee | passive patch only, simplify GPS reset as per latest... |
commit | commitdiff | tree | snapshot |
| 2013-05-30 |
Bdale Garbee | change radio to cc1120 |
commit | commitdiff | tree | snapshot |
| 2013-05-05 |
Bdale Garbee | data sheets that matter should be in the shared repo |
commit | commitdiff | tree | snapshot |
| 2013-05-05 |
Bdale Garbee | work done on CLE->DEN flight |
commit | commitdiff | tree | snapshot |
| 2013-05-05 |
Bdale Garbee | lock holes and usb connector placement |
commit | commitdiff | tree | snapshot |
| 2013-05-05 |
Bdale Garbee | snapshot |
commit | commitdiff | tree | snapshot |
| 2013-05-02 |
Bdale Garbee | snapshot work done on DEN->CLE flight |
commit | commitdiff | tree | snapshot |
| 2013-05-02 |
Bdale Garbee | move to the smaller 48 lead STM package ala TeleGPS |
commit | commitdiff | tree | snapshot |
| 2013-05-02 |
Bdale Garbee | first stab at next-gen TeleMetrum based on a subset... |
commit | commitdiff | tree | snapshot |
| 2013-05-02 |
Bdale Garbee | move to common shared symbols library |
commit | commitdiff | tree | snapshot |
| 2013-05-02 |
Bdale Garbee | move Makefile and project config to best practices |
commit | commitdiff | tree | snapshot |
| 2013-02-15 |
Bdale Garbee | move to shared scheme dir, etc |
commit | commitdiff | tree | snapshot |
| 2012-12-11 |
Bdale Garbee | move to local copy of partslistgag script |
commit | commitdiff | tree | snapshot |
| next |
projects / hw / telemetrum / shortlog