| 2011-11-13 |
Bdale Garbee | improve clearances
|
commit | commitdiff | tree |
| 2011-11-13 |
Bdale Garbee | rotate ADXL78 by 180 degrees so that axis orientation...
|
commit | commitdiff | tree |
| 2011-11-03 |
Bdale Garbee | one more tweak
|
commit | commitdiff | tree |
| 2011-11-03 |
Bdale Garbee | much copper tweaking while sitting at the rink
|
commit | commitdiff | tree |
| 2011-10-30 |
Bdale Garbee | replace accel with ADXL78 .. more copper cleanup is...
|
commit | commitdiff | tree |
| 2011-10-26 |
Bdale Garbee | part values changes for v1.2 boards .. Venus, reset...
|
commit | commitdiff | tree |
| 2011-10-19 |
Bdale Garbee | change gnd thing to one larger hole instead of two...
|
commit | commitdiff | tree |
| 2011-10-17 |
Bdale Garbee | charge status led re-wired to avoid false charge completion...
|
commit | commitdiff | tree |
| 2011-10-17 |
Bdale Garbee | clean up copper in various places, now that translucency...
|
commit | commitdiff | tree |
| 2011-10-17 |
Bdale Garbee | Replace pyro batt footprint with two ground holes for...
|
commit | commitdiff | tree |
| 2011-10-13 |
Bdale Garbee | elide separate pyro battery connector from schematic
|
commit | commitdiff | tree |
| 2011-10-13 |
Bdale Garbee | update version and copyright year
|
commit | commitdiff | tree |
| 2011-10-13 |
Bdale Garbee | reverse the 100uF ballast cap so gnd pin is adjacent...
|
commit | commitdiff | tree |
| 2011-10-13 |
Bdale Garbee | add 1uF bypass cap on LDO input
|
commit | commitdiff | tree |
| 2011-10-11 |
Bdale Garbee | saving notes
|
commit | commitdiff | tree |
| 2011-01-17 |
Bdale Garbee | note issue with v1.0 and v1.1 artwork regarding separate...
|
commit | commitdiff | tree |
| 2011-01-07 |
Bdale Garbee | add datasheet for the memory chips used on v1.1 boards
|
commit | commitdiff | tree |
| 2010-12-09 |
Bdale Garbee | change LTC1682CS8-5 vendor to linear since I'm buying...
|
commit | commitdiff | tree |
| 2010-12-09 |
Bdale Garbee | forward annotate flash part change to the pcb data
|
commit | commitdiff | tree |
| 2010-12-09 |
Bdale Garbee | part substitutions based on what's available .. big...
|
commit | commitdiff | tree |
| 2010-12-09 |
Bdale Garbee | change vendor for GPS chip to SkyTraq since we now...
|
commit | commitdiff | tree |
| 2010-12-09 |
Bdale Garbee | add DK part number for new flash chip, add missing...
|
commit | commitdiff | tree |
| 2010-12-07 |
Bdale Garbee | switch to new custom partslister module that excludes...
|
commit | commitdiff | tree |
| 2010-12-07 |
Bdale Garbee | let's have AC load pyro screw terminals by default
|
commit | commitdiff | tree |
| 2010-12-07 |
Bdale Garbee | fix damage caused by consolidation to one single resistor...
|
commit | commitdiff | tree |
| 2010-12-07 |
Bdale Garbee | forward annotate addition of name for M25P80 part
|
commit | commitdiff | tree |
| 2010-12-07 |
Bdale Garbee | move schematic to use of local symbols only for better...
|
commit | commitdiff | tree |
| 2010-12-07 |
Bdale Garbee | consolidate to single gafrc config file for gschem...
|
commit | commitdiff | tree |
| 2010-12-07 |
Bdale Garbee | finished cleaning up my working directory
|
commit | commitdiff | tree |
| 2010-12-07 |
Bdale Garbee | move parts order information to private repo
|
commit | commitdiff | tree |
| 2010-12-07 |
Bdale Garbee | un-embed all parts for pre-quote checking
|
commit | commitdiff | tree |
| 2010-12-07 |
Bdale Garbee | clean up Datasheets directory
|
commit | commitdiff | tree |
| 2010-12-07 |
Bdale Garbee | shorten a gnd trace that keithp spotted
|
commit | commitdiff | tree |
| 2010-12-07 |
Bdale Garbee | forward annotate metadata changes to the artwork
|
commit | commitdiff | tree |
| 2010-12-07 |
Bdale Garbee | add metadata for the reset controller
|
commit | commitdiff | tree |
| 2010-12-07 |
Bdale Garbee | change 5.1k to 5.6k in the accel_ref divider to stay...
|
commit | commitdiff | tree |
| 2010-12-06 |
Bdale Garbee | capture more of my DK parts orders
|
commit | commitdiff | tree |
| 2010-12-06 |
Bdale Garbee | found and fixed an errant via in the SMA footprint
|
commit | commitdiff | tree |
| 2010-12-06 |
Bdale Garbee | make all vias that connect to planes be non-thermal...
|
commit | commitdiff | tree |
| 2010-12-06 |
Bdale Garbee | take power-related vias back to 20 mils, route complete...
|
commit | commitdiff | tree |
| 2010-12-06 |
Bdale Garbee | change all vias from 20mil to 15mil drill
|
commit | commitdiff | tree |
| 2010-12-06 |
Bdale Garbee | lose TP3, the 1pps pin, to ease routing
|
commit | commitdiff | tree |
| 2010-12-06 |
Bdale Garbee | fix soldermask clearance around U.FL connector
|
commit | commitdiff | tree |
| 2010-12-06 |
Bdale Garbee | tent all vias
|
commit | commitdiff | tree |
| 2010-12-06 |
Bdale Garbee | clean up a DRC error introduced by accidental movement...
|
commit | commitdiff | tree |
| 2010-12-06 |
Bdale Garbee | update silk text
|
commit | commitdiff | tree |
| 2010-12-06 |
Bdale Garbee | switch main crystal to the "good new one" we used in...
|
commit | commitdiff | tree |
| 2010-11-22 |
Bdale Garbee | update silkscreen to reflect v1.1, clean up a few other...
|
commit | commitdiff | tree |
| 2010-11-22 |
Bdale Garbee | reduce size of the gps split ground plane, clean up...
|
commit | commitdiff | tree |
| 2010-11-22 |
Bdale Garbee | pcb updated with accel_ref divider and minus the GPS...
|
commit | commitdiff | tree |
| 2010-11-22 |
Bdale Garbee | lose the passive GPS patch
|
commit | commitdiff | tree |
| 2010-11-22 |
Bdale Garbee | eliminate irq line on the companion connector, freeing...
|
commit | commitdiff | tree |
| 2010-11-21 |
Bdale Garbee | switch pyro connector to screw terminals by default
|
commit | commitdiff | tree |
| 2010-11-18 |
Bdale Garbee | update to reflect footprint name change
|
commit | commitdiff | tree |
| 2010-11-11 |
Bdale Garbee | add targets for automating outputs
|
commit | commitdiff | tree |
| 2010-10-01 |
Bdale Garbee | add datasheet for the new memory chip
|
commit | commitdiff | tree |
| 2010-10-01 |
Bdale Garbee | change from DataFlash to M25P80 for on-board data storage
|
commit | commitdiff | tree |
| 2010-09-29 |
Bdale Garbee | shuffle schematic slightly to improve readability,...
|
commit | commitdiff | tree |
| 2010-08-11 |
Bdale Garbee | redesign reset circuit to completely solve the "cap...
|
commit | commitdiff | tree |
| 2010-05-14 |
Bdale Garbee | cap value change reflected in pcb
|
commit | commitdiff | tree |
| 2010-05-05 |
Bdale Garbee | Change reset cap to 0.1uF, mark LDO filter cap as a...
|
commit | commitdiff | tree |
| 2010-05-05 |
Bdale Garbee | remove BuildLog since it contains private information
|
commit | commitdiff | tree |
| 2010-05-01 |
Bdale Garbee | add datasheet for new ldo, capture capacitor value...
|
commit | commitdiff | tree |
| 2010-04-10 |
Bdale Garbee | results of testing 3 more on the deck
|
commit | commitdiff | tree |
| 2010-04-10 |
Bdale Garbee | all boards flashed, 213-227 not tested yet
|
commit | commitdiff | tree |
| 2010-04-10 |
Bdale Garbee | document TM v1.0 turn-on activities so far
|
commit | commitdiff | tree |
| 2010-03-10 |
Bdale Garbee | replace LDO with TC2185, adding C38 0.1uF bypass cap...
|
commit | commitdiff | tree |
| 2010-03-07 |
Bdale Garbee | tweak the position of 'main' so it doesn't crowd 'apogee...
|
commit | commitdiff | tree |
| 2010-03-07 |
Bdale Garbee | move 'pyro' into the B2 component outline since it...
|
commit | commitdiff | tree |
| 2010-03-07 |
Bdale Garbee | move a via and the text to improve 'switch' integrity...
|
commit | commitdiff | tree |
| 2010-03-07 |
Bdale Garbee | move 'companion' in silk screen to avoid vias, change...
|
commit | commitdiff | tree |
| 2010-03-05 |
Bdale Garbee | fix visibility of several attributes in schematic
|
commit | commitdiff | tree |
| 2010-02-27 |
Bdale Garbee | more notes
|
commit | commitdiff | tree |
| 2010-01-11 |
Bdale Garbee | don't delete all csv files, just the ones we create!
|
commit | commitdiff | tree |
| 2010-01-11 |
Bdale Garbee | change reset cap back from 1uF to 0.001uF, note that...
|
commit | commitdiff | tree |
| 2010-01-07 |
Bdale Garbee | use glabels and a specially tweaked .csv file to make...
|
commit | commitdiff | tree |
| 2010-01-07 |
Bdale Garbee | two resistor suffixes propagated to pcb file
|
commit | commitdiff | tree |
| 2010-01-02 |
Bdale Garbee | attribute cleanups
|
commit | commitdiff | tree |
| 2010-01-02 |
Bdale Garbee | take excel files out of zip creation, there's no way...
|
commit | commitdiff | tree |
| 2009-12-18 |
Bdale Garbee | snapshot for assembly quote
|
commit | commitdiff | tree |
| 2009-12-18 |
Bdale Garbee | fix soldermask clearance on gps patch pin
|
commit | commitdiff | tree |
| 2009-12-18 |
Bdale Garbee | a few schematic tweaks, mostly cosmetic
|
commit | commitdiff | tree |
| 2009-12-18 |
Bdale Garbee | update pcb to reflect use of v_charge for GPS vbat
|
commit | commitdiff | tree |
| 2009-12-18 |
Bdale Garbee | switch GPS chip from v_lipo to v_charge so it gets...
|
commit | commitdiff | tree |
| 2009-12-18 |
Bdale Garbee | move to 16mbit dataflash part since nobody has 32mbit...
|
commit | commitdiff | tree |
| 2009-12-18 |
Bdale Garbee | tweak attribs to reflect parts that are actually in...
|
commit | commitdiff | tree |
| 2009-12-18 |
Bdale Garbee | more copper and mask tweaking
|
commit | commitdiff | tree |
| 2009-12-18 |
Bdale Garbee | fixing soldermask relief issues, etc, identified by...
|
commit | commitdiff | tree |
| 2009-12-18 |
Bdale Garbee | add soldermask clearance to index holes on micromatch...
|
commit | commitdiff | tree |
| 2009-12-18 |
Bdale Garbee | up annular ring design rule to 7 mils, update vias...
|
commit | commitdiff | tree |
| 2009-12-18 |
Bdale Garbee | upgraded geda-gaf to 1.6.0, used gattrib to clean up...
|
commit | commitdiff | tree |
| 2009-12-17 |
Bdale Garbee | move pin 19 on Venus from RF ground to system ground...
|
commit | commitdiff | tree |
| 2009-12-12 |
Bdale Garbee | swap cs0 and cs1 pin assignments on cc1111
|
commit | commitdiff | tree |
| 2009-12-11 |
Bdale Garbee | update panel in case we ever decide to have raw pcbs...
|
commit | commitdiff | tree |
| 2009-12-11 |
Bdale Garbee | make pyro connector a noload so we can choose AMP or...
|
commit | commitdiff | tree |
| 2009-12-11 |
Bdale Garbee | fixed u.fl refdes
|
commit | commitdiff | tree |
| 2009-12-11 |
Bdale Garbee | cleaning up top layer silk
|
commit | commitdiff | tree |
| 2009-12-10 |
Bdale Garbee | fix solder mask dimension on beeper pins
|
commit | commitdiff | tree |
| 2009-12-10 |
Bdale Garbee | update pcb to use correct locking footprint for companion...
|
commit | commitdiff | tree |
| 2009-12-10 |
Bdale Garbee | working on attributes to be able to put board out for...
|
commit | commitdiff | tree |
| next |
projects / hw / telemetrum / search