summary |
shortlog | log |
commit |
commitdiff |
tree
first ⋅ prev ⋅ next
Bdale Garbee [Sat, 1 Dec 2018 15:48:12 +0000 (08:48 -0700)]
add AM logo, translated from TeleMega
Bdale Garbee [Sat, 1 Dec 2018 04:11:13 +0000 (21:11 -0700)]
route complete, drc clean
Bdale Garbee [Sat, 1 Dec 2018 03:46:50 +0000 (20:46 -0700)]
switch to title block that doesn't embed date so we can update copyright
Bdale Garbee [Wed, 28 Nov 2018 03:56:24 +0000 (20:56 -0700)]
complete transition to pcb-rnd workflow
Bdale Garbee [Wed, 28 Nov 2018 03:53:15 +0000 (20:53 -0700)]
move to pcb-rnd
Bdale Garbee [Sat, 26 May 2018 18:18:19 +0000 (12:18 -0600)]
more or less back to where I was before the conflict
Bdale Garbee [Sat, 26 May 2018 17:51:38 +0000 (11:51 -0600)]
return to our regularly scheduled re-design work...
Bdale Garbee [Sat, 26 May 2018 17:51:16 +0000 (11:51 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/telelcotwo
Bdale Garbee [Sat, 26 May 2018 17:50:02 +0000 (11:50 -0600)]
prepare to abandon work done after re-design started
Bdale Garbee [Sat, 26 May 2018 17:44:54 +0000 (11:44 -0600)]
updated attributes for off-board parts
Bdale Garbee [Wed, 16 May 2018 07:04:03 +0000 (01:04 -0600)]
update information on required off-board parts
Bdale Garbee [Wed, 16 May 2018 06:47:05 +0000 (00:47 -0600)]
add support for lighted fire button, sync switch names with firmware
Bdale Garbee [Sun, 1 Apr 2018 04:07:51 +0000 (22:07 -0600)]
drop lipo charge current to 400mA
Bdale Garbee [Tue, 20 Mar 2018 23:01:39 +0000 (17:01 -0600)]
add offboard.sch to document off-board components required
Keith Packard [Mon, 15 May 2017 16:24:18 +0000 (09:24 -0700)]
Relabel arm1/arm2 as box/arm.
The firmware now uses these inputs differently.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 16 Jul 2016 19:43:48 +0000 (12:43 -0700)]
Move refdes around on pcb a bit
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 6 Apr 2016 01:46:02 +0000 (18:46 -0700)]
Clean up routing a bit.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 26 Jan 2016 05:06:10 +0000 (21:06 -0800)]
Swap LEDs. Switch to four layers
Switch to TH LEDs, then switch to four layers to improve RF
performance while making layout easier.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 26 Jan 2016 05:05:48 +0000 (21:05 -0800)]
Switch to TH leds
These will be brighter, and can easily be remoted to the panel if desired.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 22 Dec 2015 06:42:50 +0000 (22:42 -0800)]
Switch USB connector to panel mount
This uses the Bulgin PX0446 'Buccaneer' USB mini connector (available
at Mouser), a panel mount connector that has a plug which goes into a
standard 100mil spacing header, the Sullins PPTC051LFBN-RC.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 21 Dec 2015 04:12:47 +0000 (20:12 -0800)]
Add force-boot-loader pins. Fix SPI wiring
Copied from TeleFireTwo. The force-boot pins let you force the board
to come up in the boot loader in case flashing fails. And the bad spi
wiring was copied from TeleFireTwo, so it needs to be fixed here too.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 21 Nov 2015 18:48:35 +0000 (10:48 -0800)]
Route complete and off to seeed
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 16 Nov 2015 03:00:57 +0000 (19:00 -0800)]
import
projects / hw / telelcotwo / log