summary |
shortlog | log |
commit |
commitdiff |
tree
first ⋅ prev ⋅ next
Keith Packard [Mon, 6 Aug 2012 00:35:07 +0000 (17:35 -0700)]
Build DK parts list
Keith Packard [Sun, 5 Aug 2012 23:48:41 +0000 (16:48 -0700)]
Move text around
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 5 Aug 2012 08:36:08 +0000 (01:36 -0700)]
Use DK number instead of mf number for 220pF caps
Keith Packard [Sun, 5 Aug 2012 08:30:56 +0000 (01:30 -0700)]
Replace out-of-stock components
Keith Packard [Sat, 4 Aug 2012 20:46:07 +0000 (13:46 -0700)]
ignore backup files
Keith Packard [Sat, 4 Aug 2012 20:45:08 +0000 (13:45 -0700)]
Make NC pins explicit
Cleans up the DRC file
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 4 Aug 2012 20:41:21 +0000 (13:41 -0700)]
Fix pintypes
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 4 Aug 2012 20:30:26 +0000 (13:30 -0700)]
Hide LCD digit attributes
Keith Packard [Sat, 4 Aug 2012 20:23:58 +0000 (13:23 -0700)]
Clean up packages and symbols
Remove backup files. Add conn-6
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 4 Aug 2012 20:22:09 +0000 (13:22 -0700)]
Add footprints for STM32 and tyco header
Keith Packard [Sat, 4 Aug 2012 20:20:46 +0000 (13:20 -0700)]
Add data sheets for power switch and RSSI led
Keith Packard [Sat, 4 Aug 2012 20:03:49 +0000 (13:03 -0700)]
Hide LED values
Keith Packard [Sat, 4 Aug 2012 19:56:29 +0000 (12:56 -0700)]
Use tyco 6-pin header for all switches
Should make connecting the switches a lot easier
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 4 Aug 2012 05:16:11 +0000 (22:16 -0700)]
gerber files dependency was incorrect
leading to the file never getting rebuilt
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 4 Aug 2012 05:08:30 +0000 (22:08 -0700)]
Flush out partslist.
Add vendor, part-number and other information as needed
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 4 Aug 2012 04:01:15 +0000 (21:01 -0700)]
Fix makefile to build partslist with -j flag
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 3 Aug 2012 08:55:31 +0000 (01:55 -0700)]
PEC11 footprint was accidentally a clone of PEC11L
These aren't quite the same...
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 3 Aug 2012 08:36:49 +0000 (01:36 -0700)]
Re-route rotary switch connections
Shorten them considerably to reduce potential interference issues.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 3 Aug 2012 08:01:27 +0000 (01:01 -0700)]
Move some silk around
The SPI snubber labels were all scrambled.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 3 Aug 2012 07:32:00 +0000 (00:32 -0700)]
Add bypass caps to all STM32L power leads
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 3 Aug 2012 07:07:25 +0000 (00:07 -0700)]
Add SPI snubbers.
Just in case
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 30 Jul 2012 04:09:29 +0000 (21:09 -0700)]
switch to STM152LRBT6
Need the LCD controller in the 152 version
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 24 Jul 2012 06:05:08 +0000 (23:05 -0700)]
Add serial debug connector for cc1111
Useful to separately debug the cc1111
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 24 Jul 2012 00:34:12 +0000 (17:34 -0700)]
Clean up pcb -- unthermal a couple vias, erase dirt
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 24 Jul 2012 00:28:20 +0000 (17:28 -0700)]
Route complete with cc1111 radio again
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 23 Jul 2012 16:43:26 +0000 (09:43 -0700)]
Switch back to the cc1111 for a radio
The cc1120 is missing both FEC and AES; gonna be way easier (and
cheaper) to just use the cc1111 for this thing.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 22 Jul 2012 07:23:37 +0000 (00:23 -0700)]
Move LEDs to back of board. Unthermal vias
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 16 Jul 2012 20:23:08 +0000 (13:23 -0700)]
Add π filters on all links between CPU and CC1120
Attempt to keep RFI out of the CPU
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Jul 2012 05:42:02 +0000 (22:42 -0700)]
Move ink around
Keep text from sitting on top of pads or underneath components
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Jul 2012 05:25:07 +0000 (22:25 -0700)]
Switch to CC1120 radio. Add reset controller
Probably need some RFI mitigation on the SPI leads between the CC1120
and the CPU.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 22 Jun 2012 23:31:17 +0000 (16:31 -0700)]
Use 64-pin STM32L processor. Shrink board to 4.5 x 3.75
Looks like we'll be able to use 64-bit processors almost everywhere,
so switch to that pinout for this product as well.
One proposed case, the Pelican 1120 has only about 3.875" clearance
between the two edges of the panel frame. Shrink the board to make
it fit.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 13 Jun 2012 19:33:58 +0000 (12:33 -0700)]
Add cap on vlcd line, disconnect vlcd from +3.3V
This lets us use the internal lcd voltage generator.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 13 Jun 2012 15:44:45 +0000 (08:44 -0700)]
Ignore DRC on outline. Shift USB cutout to center on connector.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 13 Jun 2012 15:24:26 +0000 (08:24 -0700)]
Add 22-ohm resistors to USB data lines
Probably a good idea.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 9 Jun 2012 10:38:14 +0000 (03:38 -0700)]
Move ink for serial number down under the license.
Seems like a more reasonable spot.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 9 Jun 2012 10:35:04 +0000 (03:35 -0700)]
Use all through-hole LEDs. Add mounting holes.
Replace SMT LEDs with larger through-hole versions so they will be
visible through the panel.
Add 8 mounting holes.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 9 Jun 2012 08:35:56 +0000 (01:35 -0700)]
Nearly route complete with LCD and knobs on backside of board.
Just need to mess with LEDs now
Keith Packard [Sat, 9 Jun 2012 01:57:07 +0000 (18:57 -0700)]
Add footprint for USB bare wires
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 9 Jun 2012 01:51:53 +0000 (18:51 -0700)]
Replace PEC11L rotary switch with PEC11 version
This one is available in the desired style
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 9 Jun 2012 01:47:59 +0000 (18:47 -0700)]
Update with battery charger, new STM debug etc
This just gets the parts in the schematic and pcb file, no layout or
routing done yet.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 9 Jun 2012 01:43:06 +0000 (18:43 -0700)]
Move LCD and switches to back side of board
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 8 Jun 2012 22:53:19 +0000 (15:53 -0700)]
Switch from PEC11L to PEC11 for rotary switch
The PEC11 is available from mouser in the desired configuration;
no-one appears to stock the PEC11L in a similar configuration.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 7 Jun 2012 09:08:45 +0000 (02:08 -0700)]
Shrink PCB to 4.5" x 4.5"
Same size as telepad.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 7 Jun 2012 07:53:42 +0000 (00:53 -0700)]
Create PCB layout
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 7 Jun 2012 01:20:28 +0000 (18:20 -0700)]
Add packages and set footprints
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 7 Jun 2012 00:09:58 +0000 (17:09 -0700)]
Start telelco work.
Includes STM32L processor and CC1111 for radio.
Signed-off-by: Keith Packard <keithp@keithp.com>
projects / hw / telelco / log