hw/telegps
2012-12-21 Keith PackardFinish routing RF section
2012-12-21 Keith PackardAdd a power switch connector (two pin holes). Route...
2012-12-20 Keith PackardMove vias and traces from underneath GPS
2012-12-20 Bdale Garbeeget a big trace out from under the GPS chip .. need...
2012-12-20 Keith PackardRoute most of the CPU
2012-12-20 Keith PackardSwitch GPS to usart2 on pins 11 and 12
2012-12-20 Keith PackardRoute PA controls towards PA
2012-12-20 Keith PackardRoute cc115L
2012-12-20 Keith PackardStitch GPS ground plane. Rotate microSD. Start PA route.
2012-12-20 Bdale Garbeelock holes, planes, and outline
2012-12-20 Bdale Garbeefix clearance issue on gps antenna footprint, proposed...
2012-12-20 Keith PackardUpdate ground plane and VCC. Place microUSB origin/HEAD origin/master
2012-12-20 Keith PackardUpdate CC115L component values
2012-12-20 Keith PackardAdd value and footprints for PA section
2012-12-20 Keith PackardAdd RF components. Hook up microSD card.
2012-12-19 Keith Packardgeda doesn't like 'passive' pins. Use 'pas' instead
2012-12-19 Keith PackardAdd two more signal layers and planned outline
2012-12-19 Keith PackardInitial schematic and pcb floor planning
2012-12-19 Keith PackardImport packages and symbols to be used for TeleGPS