git.gag.com Git - hw/telegps/search

2012-12-21	Keith Packard	Add a handful of bypass caps Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-21	Keith Packard	Fix board size to 1 inch high Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-21	Keith Packard	Shuffle ink around Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-21	Keith Packard	Route the battery charger. Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-21	Keith Packard	Finish routing RF section Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-21	Keith Packard	Add a power switch connector (two pin holes). Route... Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-20	Keith Packard	Move vias and traces from underneath GPS Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-20	Keith Packard	Route most of the CPU Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-20	Keith Packard	Switch GPS to usart2 on pins 11 and 12 Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-20	Keith Packard	Route PA controls towards PA Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-20	Keith Packard	Route cc115L Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-20	Keith Packard	Stitch GPS ground plane. Rotate microSD. Start PA route. Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-20	Keith Packard	Update ground plane and VCC. Place microUSB Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-20	Keith Packard	Update CC115L component values Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-20	Keith Packard	Add value and footprints for PA section Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-20	Keith Packard	Add RF components. Hook up microSD card. Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-19	Keith Packard	geda doesn't like 'passive' pins. Use 'pas' instead Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-19	Keith Packard	Add two more signal layers and planned outline Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-19	Keith Packard	Initial schematic and pcb floor planning Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-19	Keith Packard	Import packages and symbols to be used for TeleGPS Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree

GPS telemetry board

RSS Atom