Merge branch 'master' of ssh://git.gag.com/scm/git/hw/telegps

[hw/telegps] / packages / ufqfpn48.5c

diff --git a/packages/ufqfpn48.5c b/packages/ufqfpn48.5c
deleted file mode 100644 (file)
index ac1f049..0000000
--- a/packages/ufqfpn48.5c
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Copyright © 2012 Keith Packard <keithp@keithp.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- */
-
-load "footprint.5c"
-import Footprint;
-
-real pad_width = 0.55;
-real pad_height = 0.30;
-real pad_spacing = 0.50;
-real pad_clearance = 10 / 1000 * 25.4; 
-
-real pad_x_off = 6.20 / 2;
-real pad_y_off = 6.20 / 2;
-
-real center_width = 5.6;
-real center_height = 5.6;
-
-real package_width = 7;
-real package_height = 7;
-
-real num_pad = 12;     /* per side */
-
-element_start("ufqfpn-48");
-
-real pad_off(int n) {
-       return pad_spacing * (n - (num_pad - 1) / 2);
-}
-
-real corner(int dx, int dy) {
-       real    x = dx * package_width / 2;
-       real    y = dy * package_height / 2;
-       real    len = 0.4;
-
-       line(x, y, x - dx * len, y);
-       line(x, y, x, y - dy * len);
-}
-
-corner(-1, -1);
-corner(1, -1);
-corner(-1, 1);
-corner(1, 1);
-
-real dot_off = .3;
-
-line(-package_width/2 + dot_off, -package_height/2 + dot_off,
-     -package_width/2 + dot_off, -package_height/2 + dot_off);
-
-for (pad = 0; pad < num_pad; pad++) {
-       /* left side (1-12) */
-
-       pad_mm_clear(-pad_x_off - pad_width / 2,
-                    pad_off(pad),
-                    pad_width,
-                    pad_height,
-                    pad_clearance,
-                    sprintf("%d", pad + 1),
-                    sprintf("%d", pad + 1));
-       
-       /* bottom (13-24) */
-
-       pad_mm_clear(pad_off(pad),
-                    pad_y_off + pad_width / 2,
-                    pad_height,
-                    pad_width,
-                    pad_clearance,
-                    sprintf("%d", pad + 13),
-                    sprintf("%d", pad + 13));
-       
-       /* right side (25-36) */
-
-       pad_mm_clear(pad_x_off + pad_width / 2,
-                    -pad_off(pad),
-                    pad_width,
-                    pad_height,
-                    pad_clearance,
-                    sprintf("%d", pad + 25),
-                    sprintf("%d", pad + 25));
-       
-       /* top (37-48) */
-
-       pad_mm_clear(-pad_off(pad),
-                    -pad_y_off - pad_width / 2,
-                    pad_height,
-                    pad_width,
-                    pad_clearance,
-                    sprintf("%d", pad + 37),
-                    sprintf("%d", pad + 37));
-       
-}
-
-int pad_blocks = 3;
-
-real block_width = center_width / pad_blocks;
-real block_height = center_height / pad_blocks;
-
-real block_x(int x) = (x - (pad_blocks - 1)/2) * block_width;
-real block_y(int y) = (y - (pad_blocks - 1)/2) * block_height;
-
-bool via_block(int x, int y) {
-       return (x & 1) == 0 && (y & 1) == 0;
-}
-
-real via_hole = 15/1000 * 25.4;                /* 15 mil drill */
-real via_copper = 3.5/1000 * 25.4;     /* 7 mil anulus */
-
-for (int pad_y = 0; pad_y < pad_blocks; pad_y++) {
-       for (int pad_x = 0; pad_x < pad_blocks; pad_x++)
-               if (via_block(pad_x, pad_y)) {
-                       pin_mm_clear_mask(block_x(pad_x), block_y(pad_y),
-                                         via_hole, via_copper * 2, pad_clearance, 0,
-                                         "GND", "GND");
-                       pad_mm_clear_mask_options(block_x(pad_x), block_y(pad_y),
-                                                 block_width, block_height,
-                                                 pad_clearance, 0,
-                                                 "GND", "GND","nopaste");
-               } else {
-                       /* full square of metal */
-                       pad_mm_clear_options(block_x(pad_x), block_y(pad_y),
-                                            block_width, block_height,
-                                            0,
-                                            "GND", "GND","nopaste");
-                       /* 1/4 full of solder paste */
-                       pad_mm_clear_options(block_x(pad_x), block_y(pad_y),
-                                            block_width/2, block_height/2,
-                                            0,
-                                            "GND", "GND","");
-               }
-}
-
-element_end();