Merge branch 'master' of ssh://git.gag.com/scm/git/hw/telegps

[hw/telegps] / packages / ti-qfn20.py

diff --git a/packages/ti-qfn20.py b/packages/ti-qfn20.py
deleted file mode 100644 (file)
index 4e6c754..0000000
--- a/packages/ti-qfn20.py
+++ /dev/null
@@ -1,145 +0,0 @@
-#!/usr/bin/python
-# Copyright 2011 by Bdale Garbee <bdale@gag.com>.  GPLv2
-#
-# Program to emit PCB footprint for QFN-20 package used by the CC115L
-#
-
-# dimensions in mm from the CC115L datasheet
-
-PinWidth = 0.28          # b   
-PinHeight = 1  # L
-PinSpacing = 0.50 # e
-Overall = 4.9    # E
-GndSquare = 2.40  # D2 & E2
-CoreSquare = 2.40
-PinClearance = 2 * (PinSpacing - PinWidth)
-
-# ATMEL specifies 120-150 microns between pad and solder mask
-# AT88RF1354 Appplication note
-#
-PinResist = PinWidth + (2 * 0.07)
-
-import sys
-
-# we're going to use the 1/100 of a mil fundamental unit form
-
-def mm2mils100( mm ):
-       return int( mm / 25.4 * 1000.0 * 100.0 + 0.5 )
-
-print '# author: Keith Packard'
-print '# email: keithp@keithp.com'
-print '# dist-license: GPL 2'
-print '# use-license: unlimited'
-
-print 'Element[0x0 "qfn-20" "" "" 0 0 0 0 0 100 0x0]'
-print "("
-
-# pad under the chip, must be grounded
-print '   Pad[',\
-       mm2mils100(0), \
-       mm2mils100(0), \
-       mm2mils100(0), \
-       mm2mils100(0), \
-       mm2mils100(GndSquare), \
-       mm2mils100(PinClearance), \
-       mm2mils100(PinResist), \
-       '"pin21" "21" "square,nopaste"]'
-
-# vias in the ground pad under the chip
-for viarow in range (-1,1):
-  for viacol in range (-1,1):
-    print '   Pin[',\
-       mm2mils100(2 * viacol * CoreSquare / 3 + CoreSquare/3), \
-       mm2mils100(2 * viarow * CoreSquare / 3 + CoreSquare/3), \
-       2900, \
-       2500, \
-       0, \
-       1500, \
-       '"pin21" "21" 0x0002]'
-
-# break pad under chip into a grid to control the resist and paste masks
-
-blocks=3;
-
-for viarow in range (-1, 2):
-  for viacol in range (-1, 2):
-    if (viarow in (-1, 1)) and (viacol in (-1, 1)):
-      # copper sub-square with resist over vias
-      print '   Pad[',\
-       mm2mils100(viacol * CoreSquare / blocks), \
-       mm2mils100(viarow * CoreSquare / blocks), \
-       mm2mils100(viacol * CoreSquare / blocks), \
-       mm2mils100(viarow * CoreSquare / blocks), \
-       mm2mils100((CoreSquare)/blocks), \
-       0, \
-       0, \
-       '"pin21" "21" "square,nopaste"]'
-    else:
-      # copper sub-square without resist
-      print '   Pad[',\
-       mm2mils100(viacol * CoreSquare / blocks), \
-       mm2mils100(viarow * CoreSquare / blocks), \
-       mm2mils100(viacol * CoreSquare / blocks), \
-       mm2mils100(viarow * CoreSquare / blocks), \
-       mm2mils100((CoreSquare)/blocks), \
-       0, \
-       mm2mils100((CoreSquare)/blocks), \
-       '"pin21" "21" "square,nopaste"]'
-      # copper spot to control paste mask generation
-      print '   Pad[',\
-       mm2mils100(viacol * CoreSquare / blocks), \
-       mm2mils100(viarow * CoreSquare / blocks), \
-       mm2mils100(viacol * CoreSquare / blocks), \
-       mm2mils100(viarow * CoreSquare / blocks), \
-       1500, \
-       0, \
-       mm2mils100((CoreSquare)/blocks), \
-       '"pin21" "21" "square"]'
-
-# pins
-for pin in range (1,6):
-    print '   Pad[',\
-       mm2mils100((-3 + pin) * PinSpacing), \
-       mm2mils100(-Overall/2 + PinWidth/2), \
-       mm2mils100((-3 + pin) * PinSpacing), \
-       mm2mils100(-Overall/2 + PinHeight - PinWidth/2), \
-       mm2mils100(PinWidth), \
-       mm2mils100(PinClearance), \
-       mm2mils100(PinResist), \
-       '"pin%i"' % (16-pin), '"%i"' % (16-pin), '0x0000]'
-
-    print '   Pad[',\
-       mm2mils100((-3 + pin) * PinSpacing), \
-       mm2mils100(+Overall/2 - PinHeight + PinWidth/2), \
-       mm2mils100((-3 + pin) * PinSpacing), \
-       mm2mils100(+Overall/2 - PinWidth/2), \
-       mm2mils100(PinWidth), \
-       mm2mils100(PinClearance), \
-       mm2mils100(PinResist), \
-       '"pin%i"' % pin, '"%i"' % pin, '0x0000]'
-      
-    print '   Pad[',\
-       mm2mils100(Overall/2 - PinHeight + PinWidth/2), \
-       mm2mils100((-3 + pin) * PinSpacing), \
-       mm2mils100(Overall/2 - PinWidth/2), \
-       mm2mils100((-3 + pin) * PinSpacing), \
-       mm2mils100(PinWidth), \
-       mm2mils100(PinClearance), \
-       mm2mils100(PinResist), \
-       '"pin%i"' % (11-pin), '"%i"' % (11-pin), '0x0000]'
-
-    print '   Pad[',\
-       mm2mils100(-Overall/2 + PinWidth/2), \
-       mm2mils100((-3 + pin) * PinSpacing), \
-       mm2mils100(-Overall/2 + PinHeight - PinWidth/2), \
-       mm2mils100((-3 + pin) * PinSpacing), \
-       mm2mils100(PinWidth), \
-       mm2mils100(PinClearance), \
-       mm2mils100(PinResist), \
-       '"pin%i"' % (15+pin), '"%i"' % (15+pin), '0x0000]'
-
-print '   ElementArc[',\
-       mm2mils100(-2.0), \
-       mm2mils100(2.0), \
-       '500 500 0 360 1000 ]'
-print ")"