Push alarm FET and connectors to line up with 12V supply
[hw/telefirefour] / telefire.pcb
2012-09-23 Keith PackardPush alarm FET and connectors to line up with 12V supply
2012-09-11 Keith PackardFix copper around micromatch hole
2012-09-11 Keith PackardSwitch to newer PCB program. Clean up DRC errors
2012-09-11 Keith PackardAdd another alarm circuit.
2012-09-10 Keith PackardAdd a heat sink under the alarm FET
2012-09-10 Keith PackardFix shift register and pull-ups. Add FET for external...
2012-08-06 Keith PackardMove resistor dividers for middle relay circuits west
2012-08-06 Keith PackardMove hole text. Switch to small vias
2012-08-04 Keith PackardAdd missing left outline edge
2012-08-04 Keith PackardAdd vendor/loadstatus/vendor_part_number/value to all...
2012-08-04 Keith PackardFix DIP switch footprints. Add vendor for SOT-23 diodes
2012-08-03 Keith PackardAdd datasheet for resistor array
2012-08-03 Keith PackardShrink board to 4x4 square
2012-08-03 Keith PackardA6R rotary switches require custom 36mil holes
2012-08-03 Keith PackardAdd pull-ups on the rotary switches
2012-07-22 Keith PackardFix connection between relay and spade lug
2012-07-22 Keith PackardUse USB micro B. Adjust outline to match
2012-07-22 Keith PackardUn-thermal vias that aren't on pins
2012-07-07 Keith PackardRename to 'TeleFire'