--- /dev/null
+ # max pin width (perpendicular to axis of package) (1/100 mil)
+ # max pin length (parallel to axis of package) (1/100 mil)
+ # gap between the pads (1/100 mil)
+ # package width (1/100 mil)
+ # package height (1/100 mil)
+ # component veritcal height off board (1/100 mil)
+ # pad width and length
+ # y values for drawing the pad. The Y center of the pad is 0.5*(PINL + PINS)
+ # we need a line segment of length PADL - PADW so we have end points:
+ # 0.5*(PINL + PINS) +/- 0.5*(PADL - PADW)
+ # width of soldermask relief (5 mil on each side)
+ # silkscreen width (1/100 mils)
+ # how much space to leave around the part before the
+ # silk screen (1/100 mils)
+ # lower left corner for silk screen (1/100 mil)
+ # upper right corner for silk screen (1/100 mil)
+ # how much to notch the corners by in silk to indicate polarity
+# Element [SFlags "Desc" "Name" "Value" MX MY TX TY TDir TScale TSFlags]
+Element[ "" "Description_nichicon_NICHICON_WT_CAP_10_10" "" "`NICHICON_WT_CAP_10_10'" 0 0 0 0 0 100 ""]
+(
+# Pad [rX1 rY1 rX2 rY2 Thickness Clearance Mask "Name" "Number" SFlags]
+Pad[ 0 -20078 0 -11023 6330 1000 7330 "Plus" "1" "square"]
+Pad[ 0 20078 0 11023 6330 1000 7330 "Minus" "2" "square"]
+# Silk screen around package
+# ElementLine[ x1 y1 x2 y2 width]
+ElementLine[ 21969 21969 4465 21969 1000]
+ElementLine[ 21969 21969 21969 -18969 1000]
+ElementLine[ 21969 -18969 18969 -21969 1000]
+ElementLine[ 18969 -21969 4465 -21969 1000]
+ElementLine[ -21969 21969 -4465 21969 1000]
+ElementLine[ -21969 21969 -21969 -18969 1000]
+ElementLine[ -21969 -18969 -18969 -21969 1000]
+ElementLine[ -18969 -21969 -4465 -21969 1000]
+)