From: Bdale Garbee <bdale@gag.com>
Date: Thu, 24 Nov 2022 03:51:31 +0000 (-0700)
Subject: pull 1210 footprint from pcb standard library for cap on QuantiMotor
X-Git-Url: https://git.gag.com/?p=hw%2Faltusmetrum;a=commitdiff_plain;h=c55858dee0a13825b011f3c4e15c43e9464ea8b4

pull 1210 footprint from pcb standard library for cap on QuantiMotor
---

diff --git a/packages/1210.fp b/packages/1210.fp
new file mode 100644
index 0000000..18b9fdd
--- /dev/null
+++ b/packages/1210.fp
@@ -0,0 +1,29 @@
+	# grab the input values and convert to 1/100 mil
+	# how much to grow the pads by for soldermask [1/100 mil]
+	# clearance from planes [1/100 mil]
+	# silk screen width  [1/100 mil]
+	# courtyard silk screen width  [1/100 mil]
+# element_flags, description, pcb-name, value, mark_x, mark_y,
+# text_x, text_y, text_direction, text_scale, text_flags
+Element[0x00000000 "Standard SMT resistor, capacitor etc" "" "1210" 0 0 -3150 -3150 0 100 ""]
+(
+# 
+# Pad[x1, y1, x2, y2, thickness, clearance, mask, name , pad number, flags]
+	Pad[-5905 -2755
+		-5905 2755
+		5118 2000 5718 "1" "1" "square"]
+	    Pad[5905 -2755
+		5905 2755
+		5118 2000 5718 "2" "2" "square"]
+	ElementLine[-1968 -5314 1968 -5314 800]
+	    ElementLine[-1968 5314 1968 5314 800]
+#
+# This draws a 1 mil placement courtyard outline in silk.  It should probably
+# not be included since you wont want to try and fab a 1 mil silk line.  Then
+# again, it is most useful during parts placement.  It really is time for some
+# additional non-fab layers...
+#	ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
+#	ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
+#	ElementLine[eval(   V1/2) eval(   V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
+#	ElementLine[eval(   V1/2) eval(   V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
+)