AM=../altusmetrum
SCHEME=$(AM)/scheme
-.SUFFIXES: .sch .lht .ps .pdf
+.SUFFIXES: .lht .sch .ps .pdf .tdx .scad .stl
# need to have PROJECT defined
ifndef PROJECT
SCHEMATICS=$(PROJECT).sch
endif
-CONFIG=gafrc attribs project project.lht
+CONFIG=gafrc attribs project.lht
all: drc partslist partslist.csv pcb
drc: $(PROJECT).drc
$(PROJECT).drc: $(SCHEMATICS) Makefile $(CONFIG)
- -gnetlist -g drc2 $(SCHEMATICS) -o $@
+ -lepton-netlist -g drc2 $(SCHEMATICS) -o $@
-partslists: partslist partslist.csv partslist.dk partslist-check.dk partslist-mouser.csv partslist.other
+partslists: partslist partslist.csv partslist-dk.csv partslist-check.dk partslist-mouser.csv partslist-other.csv
partslist: $(SCHEMATICS) Makefile $(AM)/preferred-parts $(CONFIG)
- gnetlist -g bom -o $(PROJECT).unsorted $(SCHEMATICS)
+ lepton-netlist -g bom -o $(PROJECT).unsorted $(SCHEMATICS)
head -n1 $(PROJECT).unsorted > partslist
tail -n+2 $(PROJECT).unsorted | sort | awk -f $(AM)/bin/fillpartslist >> partslist
rm -f $(PROJECT).unsorted
partslist.csv: $(SCHEMATICS) Makefile $(AM)/preferred-parts $(CONFIG)
- gnetlist -L $(SCHEME) -g partslistgag -o $(PROJECT).csvtmp $(SCHEMATICS)
- (head -n1 $(PROJECT).csvtmp; tail -n+2 $(PROJECT).csvtmp | sort -t \, -k 8 | awk -f $(AM)/bin/fillpartscsv | sort ) > $@ && rm -f $(PROJECT).csvtmp
+ lepton-netlist -L $(SCHEME) -g bomAM -o $(PROJECT).csvtmp $(SCHEMATICS)
+ (head -n1 $(PROJECT).csvtmp; tail -n+2 $(PROJECT).csvtmp | sort -t \, -k 8 | \
+ awk -f $(AM)/bin/fillpartscsv | sort ) > $@ && rm -f $(PROJECT).csvtmp
-partslist.dk: partslist.csv
+partslist-dk.csv: partslist.csv
$(AM)/bin/partslist-vendor --vendor digikey partslist.csv > $@
partslist-check.dk: partslist.csv
partslist-mouser.csv: partslist.csv
$(AM)/bin/partslist-vendor --vendor mouser partslist.csv > $@
-partslist.other: partslist.csv
+partslist-other.csv: partslist.csv
$(AM)/bin/partslist-vendor --not-vendor digikey,mouser partslist.csv > $@
$(PROJECT)-seeed.csv: partslist.csv
$(AM)/bin/partslist-vendor --vendor goldphoenix partslist.csv > $@
pcb: $(SCHEMATICS) Makefile $(CONFIG)
- gsch2pcb-rnd project
-
-$(PROJECT).xy: $(PROJECT).lht $(CONFIG)
- pcb-rnd -x bom $(PROJECT).lht
-
-$(PROJECT).bottom.gbr: $(PROJECT).lht $(CONFIG)
- pcb-rnd -x gerber $(PROJECT).lht
- @case "$(SILK)" in \
- none) rm -f $(PROJECT).topsilk.gbr $(PROJECT).bottom.gbr; \
- ;; \
- top) rm -f $(PROJECT).bottomsilk.gbr; \
- ;; \
- bottom) rm -f $(PROJECT).topsilk.gbr; \
- ;; \
- both) \
- ;; \
- *) echo "Invalid silk $(SILK)"; exit 1; \
- ;; \
- esac
-
-$(PROJECT).all-drill.cnc: $(PROJECT).bottom.gbr
- gerbv -x drill -o $(PROJECT).all-drill.cnc $(PROJECT).plated-drill.cnc $(PROJECT).unplated-drill.cnc
-
-zip: $(PROJECT).zip
-
-$(PROJECT).zip: $(PROJECT).bottom.gbr $(PROJECT).xy Makefile
- rm -f $@ && zip $@ $(PROJECT).*.gbr $(PROJECT).*.cnc $(PROJECT).xy # $(PROJECT).xls
-
-ac: $(PROJECT)-ac.zip $(PROJECT)-bom.csv
-
-$(PROJECT)-bom.csv: partslist.csv
- cp partslist.csv $@
-
-$(PROJECT)-ac.zip: $(PROJECT).bottom.gbr $(PROJECT).xy
- cp $(PROJECT).bottom.gbr $(PROJECT).gbl
- cp $(PROJECT).bottommask.gbr $(PROJECT).gbs
- if [ -f $(PROJECT).bottomsilk.gbr ]; then \
- cp $(PROJECT).bottomsilk.gbr $(PROJECT).gbo; \
- fi
- if [ -f $(PROJECT).bottompaste.gbr ]; then \
- cp $(PROJECT).bottompaste.gbr $(PROJECT).gbp; \
- fi
- if [ -f $(PROJECT).topsilk.gbr ]; then \
- cp $(PROJECT).topsilk.gbr $(PROJECT).gto; \
- fi
- if [ -f $(PROJECT).toppaste.gbr ]; then \
- cp $(PROJECT).toppaste.gbr $(PROJECT).gtp; \
- fi
- cp $(PROJECT).outline.gbr $(PROJECT).gml
- cp $(PROJECT).top.gbr $(PROJECT).gtl
- cp $(PROJECT).topmask.gbr $(PROJECT).gts
- cp $(PROJECT).plated-drill.cnc $(PROJECT).ncd
- if [ -f $(PROJECT).unplated-drill.cnc ]; then \
- cp $(PROJECT).unplated-drill.cnc $(PROJECT).drd; \
- fi
- if [ -f $(PROJECT).group1.gbr -a -f $(PROJECT).group2.gbr ]; then \
- cp $(PROJECT).group1.gbr $(PROJECT).gl2; \
- cp $(PROJECT).group2.gbr $(PROJECT).gl3; \
- elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
- cp $(PROJECT).group2.gbr $(PROJECT).gl2; \
- cp $(PROJECT).group3.gbr $(PROJECT).gl3; \
- fi
- rm -f $@ && zip $@ \
- $(PROJECT).gtl $(PROJECT).gts $(PROJECT).gto $(PROJECT).gtp \
- $(PROJECT).gbl $(PROJECT).gbs $(PROJECT).gbo $(PROJECT).gbp \
- $(PROJECT).gml $(PROJECT).ncd $(PROJECT).gml $(PROJECT).drd \
- $(PROJECT).gl2 $(PROJECT).gl3 \
- $(PROJECT).xy
+ lepton-netlist -g tEDAx -o $(PROJECT).tdx $(SCHEMATICS)
+ echo 'LoadTedaxFrom(netlist, $(PROJECT).tdx); SaveTo(Layout)' | \
+ pcb-rnd --gui batch $(PROJECT).lht
+# echo "Run pcb-rnd and import $(PROJECT).tdx"
+
+define emit_xyrs
+ pcb-rnd -x XY $(PROJECT).lht
+endef
+
+ac: $(PROJECT)-ac-pcb.zip $(PROJECT)-ac-asy.zip
+
+$(PROJECT)-ac-pcb.zip: $(PROJECT).lht $(CONFIG)
+ pcb-rnd -x cam gerber:universal --outfile out/$(PROJECT) $(PROJECT).lht
+ rm -f $@ && zip -j $@ out/*
+
+$(PROJECT)-ac-asy.zip: $(PROJECT)-ac-pcb.zip partslist.csv
+ cp partslist.csv $(PROJECT)-bom.csv
+ $(call emit_xyrs)
+ rm -f $@ && zip -j $@ $(PROJECT).xy $(PROJECT)-bom.csv out/$(PROJECT).fab
oshpark: $(PROJECT)-oshpark.zip
-$(PROJECT)-oshpark.zip: $(PROJECT).bottom.gbr $(PROJECT).all-drill.cnc
- cp $(PROJECT).bottom.gbr bottom\ layer.ger
- cp $(PROJECT).bottommask.gbr bottom\ solder\ mask.ger
- if [ -f $(PROJECT).bottomsilk.gbr ]; then \
- cp $(PROJECT).bottomsilk.gbr bottom\ silk\ screen.ger; \
- fi
- if [ -f $(PROJECT).topsilk.gbr ]; then \
- cp $(PROJECT).topsilk.gbr top\ silk\ screen.ger; \
- fi
- cp $(PROJECT).outline.gbr board\ outline.ger
- cp $(PROJECT).top.gbr top\ layer.ger
- cp $(PROJECT).topmask.gbr top\ solder\ mask.ger
- cp $(PROJECT).all-drill.cnc drills.xln
- if [ -f $(PROJECT).group1.gbr -a -f $(PROJECT).group2.gbr ]; then \
- cp $(PROJECT).group1.gbr internal\ plane\ 1.ger; \
- cp $(PROJECT).group2.gbr internal\ plane\ 2.ger; \
- elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
- cp $(PROJECT).group2.gbr internal\ plane\ 1.ger; \
- cp $(PROJECT).group3.gbr internal\ plane\ 2.ger; \
- fi
- rm -f $@ && zip $@ *.ger *.xln
+$(PROJECT)-oshpark.zip: $(PROJECT).lht $(CONFIG)
+ pcb-rnd -x cam gerber:OSH_Park --outfile out/$(PROJECT) $(PROJECT).lht
+ $(call emit_xyrs)
+ rm -f $@ && zip -j $@ out/* $(PROJECT).xy
seeed: $(PROJECT)-seeed.zip $(PROJECT)-seeed.csv
-$(PROJECT)-seeed.zip: $(PROJECT).bottom.gbr $(PROJECT).all-drill.cnc $(PROJECT)-sch.pdf $(PROJECT).xy $(SEEED_EXTRA)
- cp $(PROJECT).bottom.gbr $(PROJECT).gbl
- cp $(PROJECT).bottommask.gbr $(PROJECT).gbs
- if [ -f $(PROJECT).bottomsilk.gbr ]; then \
- cp $(PROJECT).bottomsilk.gbr $(PROJECT).gbo; \
- fi
- if [ -f $(PROJECT).bottompaste.gbr ]; then \
- cp $(PROJECT).bottompaste.gbr $(PROJECT).gbp; \
- fi
- if [ -f $(PROJECT).topsilk.gbr ]; then \
- cp $(PROJECT).topsilk.gbr $(PROJECT).gto; \
- fi
- if [ -f $(PROJECT).toppaste.gbr ]; then \
- cp $(PROJECT).toppaste.gbr $(PROJECT).gtp; \
- fi
- cp $(PROJECT).outline.gbr $(PROJECT).gml
- cp $(PROJECT).top.gbr $(PROJECT).gtl
- cp $(PROJECT).topmask.gbr $(PROJECT).gts
- cp $(PROJECT).all-drill.cnc $(PROJECT).txt
- if [ -f $(PROJECT).group1.gbr -a -f $(PROJECT).group2.gbr ]; then \
- cp $(PROJECT).group1.gbr $(PROJECT).gl2; \
- cp $(PROJECT).group2.gbr $(PROJECT).gl3; \
- elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
- cp $(PROJECT).group2.gbr $(PROJECT).gl2; \
- cp $(PROJECT).group3.gbr $(PROJECT).gl3; \
- fi
- rm -f $@ && zip $@ \
- $(PROJECT).gtl $(PROJECT).gts $(PROJECT).gto $(PROJECT).gtp \
- $(PROJECT).gbl $(PROJECT).gbs $(PROJECT).gbo $(PROJECT).gbp \
- $(PROJECT).gml $(PROJECT).txt \
- $(PROJECT).gl2 $(PROJECT).gl3 \
- $(PROJECT).xy $(PROJECT)-sch.pdf \
- $(SEEED_EXTRA)
-
-goldphoenix: $(PROJECT)-goldphoenix.zip
-
-$(PROJECT)-goldphoenix.zip: $(PROJECT).bottom.gbr $(PROJECT).all-drill.cnc $(PROJECT)-sch.pdf $(PROJECT).xy $(PROJECT)-goldphoenix.csv
- cp $(PROJECT).bottom.gbr $(PROJECT).gbl
- cp $(PROJECT).bottommask.gbr $(PROJECT).gbs
- if [ -f $(PROJECT).bottomsilk.gbr ]; then \
- cp $(PROJECT).bottomsilk.gbr $(PROJECT).gbo; \
- fi
- if [ -f $(PROJECT).bottompaste.gbr ]; then \
- cp $(PROJECT).bottompaste.gbr $(PROJECT).gbp; \
- fi
- if [ -f $(PROJECT).topsilk.gbr ]; then \
- cp $(PROJECT).topsilk.gbr $(PROJECT).gto; \
- fi
- if [ -f $(PROJECT).toppaste.gbr ]; then \
- cp $(PROJECT).toppaste.gbr $(PROJECT).gtp; \
- fi
- cp $(PROJECT).outline.gbr $(PROJECT).gml
- cp $(PROJECT).top.gbr $(PROJECT).gtl
- cp $(PROJECT).topmask.gbr $(PROJECT).gts
- cp $(PROJECT).all-drill.cnc $(PROJECT).txt
- if [ -f $(PROJECT).group1.gbr -a -f $(PROJECT).group2.gbr ]; then \
- cp $(PROJECT).group1.gbr $(PROJECT).gl2; \
- cp $(PROJECT).group2.gbr $(PROJECT).gl3; \
- elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
- cp $(PROJECT).group2.gbr $(PROJECT).gl2; \
- cp $(PROJECT).group3.gbr $(PROJECT).gl3; \
- fi
- rm -f $@ && zip $@ \
- $(PROJECT).gtl $(PROJECT).gts $(PROJECT).gto $(PROJECT).gtp \
- $(PROJECT).gbl $(PROJECT).gbs $(PROJECT).gbo $(PROJECT).gbp \
- $(PROJECT).gml $(PROJECT).txt \
- $(PROJECT).gl2 $(PROJECT).gl3 \
- $(PROJECT).xy $(PROJECT)-sch.pdf \
- $(PROJECT)-goldphoenix.csv
-
-stencilsunlimited: $(PROJECT).bottom.gbr $(PROJECT).toppaste.gbr $(PROJECT).outline.gbr
- rm -f $(PROJECT)-stencil.zip && zip $(PROJECT)-stencil.zip $(PROJECT).toppaste.gbr $(PROJECT).outline.gbr
+$(PROJECT)-seeed.zip: $(PROJECT).lht $(CONFIG) $(PROJECT)-sch.pdf $(SEEED_EXTRA)
+ pcb-rnd -x cam gerber:Seeed --outfile out/$(PROJECT) $(PROJECT).lht
+ $(call emit_xyrs)
+ rm -f $@ && zip -j $@ out/* $(PROJECT).xy $(PROJECT)-sch.pdf $(SEEED_EXTRA)
+
+jlcpcb: $(PROJECT)-jlcpcb.zip
+
+$(PROJECT)-jlcpcb.zip: $(PROJECT).lht $(CONFIG)
+ pcb-rnd -x cam gerber:JLC_PCB --outfile out/$(PROJECT) $(PROJECT).lht
+ $(call emit_xyrs)
+ rm -f $@ && zip -j $@ out/* $(PROJECT).xy
+
+stencilsunlimited: $(BOTTOMCOPPER) $(PROJECT).toppaste.gbr $(OUTLINE)
+ rm -f $(PROJECT)-stencil.zip && zip $(PROJECT)-stencil.zip $(PROJECT).toppaste.gbr $(OUTLINE)
stencil: $(PROJECT).lht
- pcb-rnd -x gerber --paste-adjust -0.075 $(PROJECT).lht
- mv $(PROJECT).toppaste.gbr stencil.gbr
+ pcb-rnd -x cam gerber:stencils --outfile out/$(PROJECT) $(PROJECT).lht
+
+$(PROJECT).scad: $(PROJECT).lht
+ pcb-rnd -x openscad $(PROJECT).lht
+
+$(PROJECT).stl: $(PROJECT).scad
+ openscad --o $(PROJECT).stl $(PROJECT).scad
clean:
- rm -f *.bom *.drc *.log *~ $(PROJECT).ps *.gbr *.cnc *bak* *- *.zip
- rm -f *.net *.xy *.cmd *.png partslist partslist.csv *.ger *.xln
- rm -f *.partslist *.unsorted $(PROJECT).xls muffin-5267.pdf muffin-keithp.pdf
- rm -f partslist-check.dk partslist.dk partslist-mouser.csv partslist.other
+ rm -f *.bom *.drc *.log *~ $(PROJECT).ps *.gbr *.cnc *bak* *- *.zip *.tdx *.backup
+ rm -f *.net *.xy *.cmd *.png partslist partslist.csv *.ger *.xln PCB*save
+ rm -f *.partslist *.unsorted $(PROJECT).xls muffin-*.pdf attribs
+ rm -f partslist-check.dk partslist-dk.csv partslist-mouser.csv partslist-other.csv
rm -f $(PROJECT)-sch.ps $(PROJECT)-sch.pdf $(PROJECT)-pcb.ps $(PROJECT)-pcb.pdf
rm -f $(PROJECT).gbl $(PROJECT).gbs $(PROJECT).gbo $(PROJECT).gbp $(PROJECT).ncd
rm -f $(PROJECT).gto $(PROJECT).gtp $(PROJECT).gml $(PROJECT).gtl $(PROJECT).gts
rm -f $(PROJECT).txt $(PROJECT).gl2 $(PROJECT).gl3
+ rm -f $(PROJECT).drd $(PROJECT).g2l $(PROJECT).g3l $(PROJECT).gko
rm -f $(PROJECT)-seeed.zip $(PROJECT)-seeed.csv
rm -f $(PROJECT)-goldphoenix.zip $(PROJECT)-goldphoenix.csv
- rm -f $(PROJECT)*.ps $(PROJECT)*.pdf
+ rm -f $(PROJECT)*.ps $(PROJECT)*.pdf $(PROJECT)-bom.csv
+ rm -f *.scad
+ rm -fr out
+
+muffins: muffin-6570.pdf muffin-5267.pdf muffin-keithp.pdf
-muffins: muffin-5267.pdf muffin-keithp.pdf
+muffin-6570.pdf: partslist.csv $(AM)/glabels/muffin-6570.glabels
+ glabels-3-batch $(AM)/glabels/muffin-6570.glabels -i partslist.csv -o $@ > /dev/null
muffin-5267.pdf: partslist.csv $(AM)/glabels/muffin-short-5267.glabels
glabels-3-batch $(AM)/glabels/muffin-short-5267.glabels -i partslist.csv -o $@ > /dev/null
muffin-keithp.pdf: partslist.csv $(AM)/glabels/muffin-5267.glabels
glabels-3-batch $(AM)/glabels/muffin-5267.glabels -i partslist.csv -o $@ > /dev/null
-.sch.ps:
- gschem -p -o $@ -s /usr/share/gEDA/scheme/print.scm $*.sch
+.sch.pdf:
+ lepton-cli export -o $@ $*.sch
-.ps.pdf:
- ps2pdf $*.ps
-
-SCHEMATICS_PS=$(SCHEMATICS:.sch=.ps)
SCHEMATICS_PDF=$(SCHEMATICS:.sch=.pdf)
$(PROJECT)-sch.pdf: $(SCHEMATICS_PDF)
- pdfjoin -o $@ $(SCHEMATICS_PDF)
+ pdfunite $(SCHEMATICS_PDF) $@
$(PROJECT)-pcb.ps: $(PROJECT).lht $(CONFIG)
pcb-rnd -x ps --psfile $@ --media Letter --ps-color $(PROJECT).lht
$(PROJECT)-pcb.pdf: $(PROJECT)-pcb.ps
ps2pdf $(PROJECT)-pcb.ps
-$(PROJECT)-big.ps: $(PROJECT).lht $(CONFIG)
+$(PROJECT)-big.ps: $(PROJECT).lht $(CONFIG)
pcb-rnd -x ps --psfile $@ --media Letter --ps-color --fill-page --no-align-marks $(PROJECT).lht
-$(PROJECT)-big.pdf: $(PROJECT)-big.ps
+$(PROJECT)-big.pdf: $(PROJECT)-big.ps
ps2pdf $(PROJECT)-big.ps
pdf: $(PROJECT)-sch.pdf $(PROJECT)-pcb.pdf $(PROJECT)-big.pdf
-project:
- (echo 'schematics $(SCHEMATICS)'; \
- echo 'output-name $(PROJECT)'; \
- echo 'skip-m4') > $@
-
attribs: $(AM)/attribs
cp $(AM)/attribs $@
echo '(reset-component-library)'; \
echo '(load "../altusmetrum/gafrc")') > $@
+project.lht: $(AM)/lihata/project.lht
+ cp $(AM)/lihata/project.lht .
+
.gitignore: $(AM)/gitignore.in
sed 's/@@PROJECT@@/$(PROJECT)/g' $(AM)/gitignore.in > .gitignore
projects / hw / altusmetrum / blobdiff