update to python3

[hw/altusmetrum] / packages / molex / picoflex-th-v.py

diff --git a/packages/molex/picoflex-th-v.py b/packages/molex/picoflex-th-v.py
index 8cb6422688aedf599db07e3a31b34634e2f2f8ca..a0d6e20049dcf7e695e10d3a89356048919ccac7 100755 (executable)
--- a/packages/molex/picoflex-th-v.py
+++ b/packages/molex/picoflex-th-v.py
@@ -1,5 +1,5 @@
-#!/usr/bin/python2
-# Copyright 2008 by Bdale Garbee <bdale@gag.com>.  GPLv2
+#!/usr/bin/python3
+# Copyright 2008,2024 by Bdale Garbee <bdale@gag.com>.  GPLv2
 #
 # Program to emit PCB footprint for
 #   Molex 1.25mm PicoBlade, vertical through-hole header 53047-XX10, 2-15 pins 
@@ -33,82 +33,82 @@ if pins > 26:
        sys.stderr.write('Must be no more than 26 pins\n')
        sys.exit(1)
 
-print '# author: Bdale Garbee'
-print '# email: bdale@gag.com'
-print '# dist-license: GPL 2'
-print '# use-license: unlimited'
+print('# author: Bdale Garbee')
+print('# email: bdale@gag.com')
+print('# dist-license: GPL 2')
+print('# use-license: unlimited')
 
-print 'Element[0x0 "PicoFlex%i"' % pins,'"" "" 0 0 0 0 0 100 0x0]'
-print "("
-for col in range ((pins+1)/2):
+print('Element[0x0 "PicoFlex%i"' % pins,'"" "" 0 0 0 0 0 100 0x0]')
+print("(")
+for col in range (int((pins+1)/2)):
     for row in range (2):
-       if row == 1:
-           offset=RowOffset
-           spacing=RowSpacing
-       else:
-           offset=0
-           spacing=0
+        if row == 1:
+            offset=RowOffset
+            spacing=RowSpacing
+        else:
+            offset=0
+            spacing=0
         pinnum = (col * 2) + row + 1
         if pinnum == 1:
-           Flags = '0x0101'
+            Flags = '0x0101'
         else:
-           Flags = '0x0001'
-        print '   Pin[', \
+            Flags = '0x0001'
+        print('   Pin[', \
            mm2mils100(col*PinSpacing + offset), \
            mm2mils100(spacing), \
            mm2mils100(PinDiam*2), \
            600, \
            mm2mils100(PinDiam*2)+1000, \
            mm2mils100(PinDiam), \
-           '"pin%i"' % pinnum, '"%i"' % pinnum, Flags, ']'
+           '"pin%i"' % pinnum, '"%i"' % pinnum, Flags, ']')
 
-print '   Pin[', \
+print('   Pin[', \
     mm2mils100(-MntX), \
     mm2mils100(-MntY), \
     mm2mils100(MntDiam), \
     0, \
     mm2mils100(MntDiam), \
     mm2mils100(MntDiam), \
-    '"mnt" "0"', '0x0008', ']'
+    '"mnt" "0"', '0x0008', ']')
 
-print '   Pin[', \
+print('   Pin[', \
     mm2mils100(((pins+1)/2-1)*PinSpacing+RowOffset+MntX), \
     mm2mils100(-MntY), \
     mm2mils100(MntDiam), \
     0, \
     mm2mils100(MntDiam), \
     mm2mils100(MntDiam), \
-    '"mnt" "0"', '0x0008', ']'
+    '"mnt" "0"', '0x0008', ']')
 
 BoxWidth = BoxEnd + ((pins/2-1) * PinSpacing + RowOffset);
 BoxYOff = MntY + MntDiam/2 + .1524
 
-print '   ElementLine[', \
+print('   ElementLine[', \
        mm2mils100(-BoxEnd), \
        mm2mils100(-BoxYOff), \
        mm2mils100(-BoxEnd), \
        mm2mils100(BoxHeight-BoxYOff), \
-       LineWidth, ']'
+       LineWidth, ']')
 
-print '   ElementLine[', \
+print('   ElementLine[', \
        mm2mils100(-BoxEnd), \
        mm2mils100(BoxHeight-BoxYOff), \
        mm2mils100(BoxWidth), \
        mm2mils100(BoxHeight-BoxYOff), \
-       LineWidth, ']'
+       LineWidth, ']')
 
-print '   ElementLine[', \
+print('   ElementLine[', \
        mm2mils100(BoxWidth), \
        mm2mils100(BoxHeight-BoxYOff), \
        mm2mils100(BoxWidth), \
        mm2mils100(-BoxYOff), \
-       LineWidth, ']'
+       LineWidth, ']')
 
-print '   ElementLine[', \
+print('   ElementLine[', \
        mm2mils100(BoxWidth), \
        mm2mils100(-BoxYOff), \
        mm2mils100(-BoxEnd), \
        mm2mils100(-BoxYOff), \
-       LineWidth, ']'
+       LineWidth, ']')
   
-print ")"
+print(")")