Merge tag '1.2.0' into debian

[fw/stlink] / stlinkv1_macosx_driver / README

diff --git a/stlinkv1_macosx_driver/README b/stlinkv1_macosx_driver/README
deleted file mode 100644 (file)
index 0c78948..0000000
--- a/stlinkv1_macosx_driver/README
+++ /dev/null
@@ -1,37 +0,0 @@
-from: marco.cassinerio@gmail.com
-to: texane@gmail.com
-
-Hi,
-
-i managed to get the stlink v1 working under os x and i would like to share the solution so maybe you can
-add it in your package.
-The problem is that os x claims the device as scsi and libusb won't be able to connect to it.
-I've created what is called a codeless driver which claims the device and has a higher priority then the
-default apple mass storage driver, so the device can be accessed through libusb.
-
-I tested this codeless driver under OS X 10.6.8 and 10.7.2. I assume it works with any 10.6.x and 10.7.x
-version as well.
-
-Attached to this mail you'll find the osx folder with the source code of the driver, both drivers (for
-10.6.x and 10.7.x), an install.sh script and the modified Makefile, i only added a line at the end which
-invoke the install.sh.
-
-First, unpack the osx.tar.gz contents:
-tar xzvf osx.tar.gz
-
-Then, install the driver using:
-sudo make osx_stlink_shield
-
-no reboot required.
-
-P.S. If error `OS X version not supported` occurs. For the latest versions of Mac OS X you may need to change the `osx/install.sh` as follows:
-```
-< ISOSXLION=$(sw_vers -productVersion)
----
-> ISOSXLION=$(sw_vers -productVersion | sed -e 's:.[[:digit:]]*$::')
-```
-FOR OS X 10.10 Yosemite you must force the system to load unsigned kernelextensions
-
-sudo nvram boot-args="kext-dev-mode=1“
-
-reboot the system!