Report about more Chips tested

[fw/stlink] / README

diff --git a/README b/README
index 28caaf87822977e0ea611ed918f9017a7c185838..bb06f60a96bf236dd3b3364271d6034d7b3639e1 100644 (file)
--- a/README
+++ b/README
@@ -1,11 +1,3 @@
-IMPORTANT SHORT TERM NOTICE:
-If you are targetting F1 devices, with either stlinkv1 or v2 hardware, you
-_need_ to use karlp's libwork2 branch.  
-
-If you are targetting F4, you _need_ to use texane's master
-
-If you are targetting F2 or L1, please let us know how it goes!
-
 HOWTO
 =====
 
@@ -22,8 +14,9 @@ called stlink and there are 2 versions:
 Common requirements
 ~~~~~~~~~~~~~~~~~~~
 
-libusb-1.0  (You probably already have this, but you'll need the 
+. libusb-1.0  (You probably already have this, but you'll need the
 development version to compile)
+. pkg-config
 
 IF YOU HAVE AN STLINKv1
 ~~~~~~~~~~~~~~~~~~~~~~~
@@ -110,6 +103,7 @@ If you would link your executable to 0x08000000 and then do
 (gdb) load firmware.elf
 then it would be written to the memory.
 
+
 FAQ
 ===
 
@@ -127,3 +121,26 @@ Q: At some point I use GDB command `next', and it hangs.
 A: Sometimes when you will try to use GDB `next' command to skip a loop,
 it will use a rather inefficient single-stepping way of doing that.
 Set up a breakpoint manually in that case and do `continue'.
+
+Currently known working combinations of programmer and target
+=============================================================
+
+STLink v1 (as found on the 32VL Discovery board)
+
+Known Working Targets:
+* STM32F100xx (Medium Density VL)
+* STM32F103 (according to jpa- on ##stm32)
+
+No information:
+* everything else!
+
+STLink v2 (as found on the 32L and F4 Discovery boards)
+Known Working Targets:
+* STM32F100xx (Medium Density VL, as on the 32VL Discovery board)
+* STM32L1xx (STM32L Discovery board)
+* STM32F107RC, STM32L151RB, STM32F205RE and  STM32F405RE  on a custom boards 
+  (https://github.com/UweBonnes/wiki_fuer_alex/layout/usps...)
+* STM32F407xx (STM32F4 Discovery board)
+
+Please report any and all known working combinations so I can update this!
+