From 97f47e8c9486377affac7af3c3d260613c6d06f2 Mon Sep 17 00:00:00 2001 From: Erhan Kurubas Date: Sun, 3 Jul 2022 12:28:12 +0300 Subject: [PATCH] tcl/board: add ESP32-S3 config for ESP USB Bridge board Signed-off-by: Erhan Kurubas Change-Id: I97d0f01f342dddb31b2d454858fe854f002cf567 Reviewed-on: https://review.openocd.org/c/openocd/+/7077 Tested-by: jenkins Reviewed-by: Antonio Borneo --- tcl/board/esp32s3-bridge.cfg | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 tcl/board/esp32s3-bridge.cfg diff --git a/tcl/board/esp32s3-bridge.cfg b/tcl/board/esp32s3-bridge.cfg new file mode 100644 index 000000000..a42e257c5 --- /dev/null +++ b/tcl/board/esp32s3-bridge.cfg @@ -0,0 +1,15 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# +# Example OpenOCD configuration file for ESP32-S3 connected via ESP USB Bridge board +# +# For example, OpenOCD can be started for ESP32-S3 debugging on +# +# openocd -f board/esp32s3-bridge.cfg +# + +# Source the JTAG interface configuration file +source [find interface/esp_usb_bridge.cfg] +# ESP32S3 chip id defined in the idf esp_chip_model_t +espusbjtag chip_id 9 +# Source the ESP32-S3 configuration file +source [find target/esp32s3.cfg] -- 2.30.2