From: Sean Anderson <sean.anderson@seco.com>
Date: Fri, 11 Feb 2022 22:45:32 +0000 (-0500)
Subject: target: Add support for ls1088a
X-Git-Url: https://git.gag.com/?p=fw%2Fopenocd;a=commitdiff_plain;h=3fcfe4f196f6c333ee0ba2078af9cfa3eb896761

target: Add support for ls1088a

The LS1088A is an octo-core aarch64 processor from NXP in the layerscape
family. The JTAG is undocumented, but I was able to figure things out
from the output of `dap info`. This is the first in-tree example of
using the hwthread rtos (as far as I know), so hopefully it can serve as
an example to other developers. There are some ETMs, but I was unable to
try them out because I got 'invalid command name "etm"' when trying to
test things out.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Change-Id: I9b0791d27d8c41170a413a8d86431107a85feba2
Reviewed-on: https://review.openocd.org/c/openocd/+/6848
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
---

diff --git a/tcl/target/ls1088a.cfg b/tcl/target/ls1088a.cfg
new file mode 100644
index 000000000..136ee77a3
--- /dev/null
+++ b/tcl/target/ls1088a.cfg
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# NXP LS1088A
+
+if { [info exists CHIPNAME] } {
+	set _CHIPNAME $CHIPNAME
+} else {
+	set _CHIPNAME ls1088a
+}
+
+if { [info exists DAP_TAPID] } {
+	set _DAP_TAPID $DAP_TAPID
+} else {
+	set _DAP_TAPID 0x5ba00477
+}
+
+jtag newtap $_CHIPNAME dap -irlen 4 -expected-id $_DAP_TAPID
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.dap
+
+target create $_CHIPNAME.axi mem_ap -dap $_CHIPNAME.dap -ap-num 1
+
+set _CPU_BASE 0x81000000
+set _CPU_STRIDE 0x100000
+set _CPU_DBGOFF 0x10000
+set _CPU_CTIOFF 0x20000
+
+set _TARGETS {}
+for {set i 0} {$i < 8} {incr i} {
+	set _BASE [expr {$_CPU_BASE + $_CPU_STRIDE * $i}]
+	cti create $_CHIPNAME.cti$i -dap $_CHIPNAME.dap -ap-num 0 \
+		-baseaddr [expr {$_BASE + $_CPU_CTIOFF}]
+	target create $_CHIPNAME.cpu$i aarch64 -dap $_CHIPNAME.dap \
+		-cti $_CHIPNAME.cti$i -dbgbase [expr {$_BASE + $_CPU_DBGOFF}] \
+		{*}[expr {$i ? "-coreid $i" : "-rtos hwthread" }]
+	lappend _TARGETS $_CHIPNAME.cpu$i
+}
+
+target smp {*}$_TARGETS
+
+targets $_CHIPNAME.cpu0
+
+# Seems to work OK in testing
+adapter speed 10000