Remove remaining references to FTD2XX driver

[fw/openocd] / testing / build.test2 / README.txt

diff --git a/testing/build.test2/README.txt b/testing/build.test2/README.txt
deleted file mode 100644 (file)
index 382105e..0000000
--- a/testing/build.test2/README.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-
-This makefile is how I Duane Ellis (openocd@duaneellis.com) builds
-openocd test purposes on Cygwin. I have included it here so others
-might also make use of the same configuration that I use to develop
-Openocd.
-
---Duane Ellis
-
-To make use of it do the following:
-
-(1)    Check out openocd in the standard way.
-
-For example - in cygwin, type this:
-
-    bash$  mkdir -p /home/duane/test
-    bash$  cd /home/duane/test
-    bash$  svn co https://svn.berlios.de/svnroot/repos/openocd/trunk openocd
-
-(2)    COPY this folder "right above" where you have OpenOCD.
-
-    bash$  cd /home/duane/test
-    bash$  cp ./openocd/testing/build.test2/*   /home/duane/test/.
-
-(3) OPTIONALLY
-
-    You might want to review the file "local.uses"
-    Change options and so forth at the top of the file.
-
-(4)    Initially, you need to download some additional files.
-       These include "libftdi", "libconfuse", and the ftd2xx drivers.
-
-(5)    You also need to build the supporting libraries and install them
-       (They are installed "locally" only)
-
-       Type this command:
-
-    bash$ cd /home/duane/test
-
-    bash$ make initial.build
-
-         which:  (1) downloads files
-                 (2) builds the libs
-                 (3) builds OpenOCD
-
-(6)     As you hack upon OpenOCD... to rebuild OpenOCD...
-       
-    bash$ cd /home/duane/test
-
-    bash$ make remake
-
-         which: (1) re-bootstraps 
-                (2) re-configures
-                (3) re-builds
-                (4) re-installs.
-   
-=======
-**END**
-=======