tcl/target: replace event trace-config

[fw/openocd] / tcl / target / stm32l4x.cfg

diff --git a/tcl/target/stm32l4x.cfg b/tcl/target/stm32l4x.cfg
index dabdacd4173e527a8d93cfa695a37dc2ff4c98c3..61d25b7c3e68ae9a2b306c01b8c5a4ca02b6d599 100644 (file)
--- a/tcl/target/stm32l4x.cfg
+++ b/tcl/target/stm32l4x.cfg
@@ -40,8 +40,6 @@ if { [info exists CPUTAPID] } {
 swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
 
-tpiu create $_CHIPNAME.tpiu -dap $_CHIPNAME.dap -ap-num 0 -baseaddr 0xE0040000
-
 if {[using_jtag]} {
    jtag newtap $_CHIPNAME bs -irlen 5
 }
@@ -103,7 +101,10 @@ $_TARGETNAME configure -event examine-end {
        mmw 0xE0042008 0x00001800 0
 }
 
-proc proc_post_enable {_chipname} {
+tpiu create $_CHIPNAME.tpiu -dap $_CHIPNAME.dap -ap-num 0 -baseaddr 0xE0040000
+
+lappend _telnet_autocomplete_skip _proc_pre_enable_$_CHIPNAME.tpiu
+proc _proc_pre_enable_$_CHIPNAME.tpiu {_chipname} {
        targets $_chipname.cpu
 
        if { [$_chipname.tpiu cget -protocol] eq "sync" } {
@@ -132,7 +133,7 @@ proc proc_post_enable {_chipname} {
        }
 }
 
-$_CHIPNAME.tpiu configure -event post-enable "proc_post_enable $_CHIPNAME"
+$_CHIPNAME.tpiu configure -event pre-enable "_proc_pre_enable_$_CHIPNAME.tpiu $_CHIPNAME"
 
 $_TARGETNAME configure -event reset-init {
        # CPU comes out of reset with MSI_ON | MSI_RDY | MSI Range 6 (4 MHz).