tcl/target/ls1088: Break out common configuration

[fw/openocd] / tcl / target / ls1088a.cfg

diff --git a/tcl/target/ls1088a.cfg b/tcl/target/ls1088a.cfg
index f9ae9a134ad6774d95c9e86ed21624ef64c8062b..193d6ddc7712f51f609cba9d4fc76516f7d2a163 100644 (file)
--- a/tcl/target/ls1088a.cfg
+++ b/tcl/target/ls1088a.cfg
@@ -13,62 +13,9 @@ if { [info exists DAP_TAPID] } {
        set _DAP_TAPID 0x5ba00477
 }
 
-jtag newtap $_CHIPNAME dap -irlen 4 -expected-id $_DAP_TAPID
-dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.dap
+set _CPUS 8
 
-target create $_CHIPNAME.axi mem_ap -dap $_CHIPNAME.dap -ap-num 1
-
-set _CPU_BASE 0x81000000
-set _CPU_STRIDE 0x100000
-set _CPU_DBGOFF 0x10000
-set _CPU_CTIOFF 0x20000
-
-set _TARGETS {}
-for {set i 0} {$i < 8} {incr i} {
-       set _BASE [expr {$_CPU_BASE + $_CPU_STRIDE * $i}]
-       cti create $_CHIPNAME.cti$i -dap $_CHIPNAME.dap -ap-num 0 \
-               -baseaddr [expr {$_BASE + $_CPU_CTIOFF}]
-       target create $_CHIPNAME.cpu$i aarch64 -dap $_CHIPNAME.dap \
-               -cti $_CHIPNAME.cti$i -dbgbase [expr {$_BASE + $_CPU_DBGOFF}] \
-               {*}[expr {$i ? "-coreid $i" : "-rtos hwthread" }]
-       lappend _TARGETS $_CHIPNAME.cpu$i
-}
-
-target smp {*}$_TARGETS
-
-# Service processor
-target create $_CHIPNAME.sp cortex_a -dap $_CHIPNAME.dap -ap-num 0 -dbgbase 0x80138000
-
-# Normally you will not need to call this, but if you are using the hard-coded
-# Reset Configuration Word (RCW) you will need to call this manually. The CPU's
-# reset vector is 0, and the boot ROM at that location contains ARMv7-A 32-bit
-# instructions. This will cause the CPU to almost immediately execute an
-# illegal instruction.
-#
-# This code is idempotent; releasing a released CPU has no effect, although it
-# will halt/resume the service processor.
-add_help_text release_cpu "Release a cpu which is held off"
-proc release_cpu {cpu} {
-       set RST_BRRL 0x1e60060
-
-       set old [target current]
-       targets $::_CHIPNAME.sp
-       set not_halted [string compare halted [$::_CHIPNAME.sp curstate]]
-       if {$not_halted} {
-               halt
-       }
-
-       # Release the cpu; it will start executing something bogus
-       mem2array regs 32 $RST_BRRL 1
-       mww $RST_BRRL [expr {$regs(0) | 1 << $cpu}]
-
-       if {$not_halted} {
-               resume
-       }
-       targets $old
-}
-
-targets $_CHIPNAME.cpu0
+source [find target/lsch3_common.cfg]
 
 # Seems to work OK in testing
 adapter speed 10000