stlink: Add PID for V3 device without MSD

[fw/openocd] / tcl / interface / stlink.cfg

diff --git a/tcl/interface/stlink.cfg b/tcl/interface/stlink.cfg
index 54cd63eb6984858a24731f721aa4ab9b3cc9af00..cb8e0049456a6e5fb2980c916ca96f2ff54d56a5 100644 (file)
--- a/tcl/interface/stlink.cfg
+++ b/tcl/interface/stlink.cfg
@@ -6,7 +6,7 @@
 adapter driver hla
 hla_layout stlink
 hla_device_desc "ST-LINK"
-hla_vid_pid 0x0483 0x3744 0x0483 0x3748 0x0483 0x374b 0x0483 0x374d 0x0483 0x374e 0x0483 0x374f 0x0483 0x3752 0x0483 0x3753
+hla_vid_pid 0x0483 0x3744 0x0483 0x3748 0x0483 0x374b 0x0483 0x374d 0x0483 0x374e 0x0483 0x374f 0x0483 0x3752 0x0483 0x3753 0x0483 0x3754
 
 # Optionally specify the serial number of ST-LINK/V2 usb device.  ST-LINK/V2
 # devices seem to have serial numbers with unreadable characters.  ST-LINK/V2