* Copyright (C) 2005 by Dominic Rath *
* Dominic.Rath@gmx.de *
* *
- * Copyright (C) 2007,2008 Øyvind Harboe *
+ * Copyright (C) 2007-2010 Øyvind Harboe *
* oyvind.harboe@zylin.com *
* *
* Copyright (C) 2008 by Spencer Oliver *
* spen@spen-soft.co.uk *
* *
+ * Copyright (C) 2011 by Broadcom Corporation *
+ * Evan Hunter - ehunter@broadcom.com *
+ * *
+ * Copyright (C) ST-Ericsson SA 2011 *
+ * michel.jaouen@stericsson.com : smp minimum support *
+ * *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
#include "config.h"
#endif
-#include "gdb_server.h"
-#include "target_request.h"
-#include "register.h"
+#include <target/breakpoints.h>
+#include <target/target_request.h>
+#include <target/register.h>
#include "server.h"
-#include "flash.h"
-#include "image.h"
-#include "jtag.h"
+#include <flash/nor/core.h>
+#include "gdb_server.h"
+#include <target/image.h>
+#include <jtag/jtag.h>
+#include "rtos/rtos.h"
+#include "target/smp.h"
+
+
+/**
+ * @file
+ * GDB server implementation.
+ *
+ * This implements the GDB Remote Serial Protocol, over TCP connections,
+ * giving GDB access to the JTAG or other hardware debugging facilities
+ * found in most modern embedded processors.
+ */
+
+/* private connection data for GDB */
+struct gdb_connection
+{
+ char buffer[GDB_BUFFER_SIZE];
+ char *buf_p;
+ int buf_cnt;
+ int ctrl_c;
+ enum target_state frontend_state;
+ struct image *vflash_image;
+ int closed;
+ int busy;
+ int noack_mode;
+ bool sync; /* set flag to true if you want the next stepi to return immediately.
+ allowing GDB to pick up a fresh set of register values from the target
+ without modifying the target state. */
+ /* We delay reporting memory write errors until next step/continue or memory
+ * write. This improves performance of gdb load significantly as the GDB packet
+ * can be replied immediately and a new GDB packet will be ready without delay
+ * (ca. 10% or so...).
+ */
+ bool mem_write_error;
+};
#if 0
#define _DEBUG_GDB_IO_
#endif
-static gdb_connection_t *current_gdb_connection;
+static struct gdb_connection *current_gdb_connection;
static int gdb_breakpoint_override;
static enum breakpoint_type gdb_breakpoint_override_type;
-extern int gdb_error(connection_t *connection, int retval);
-static unsigned short gdb_port = 3333;
-static const char *DIGITS = "0123456789abcdef";
+static int gdb_error(struct connection *connection, int retval);
+static const char *gdb_port;
+static const char *gdb_port_next;
+static const char DIGITS[16] = "0123456789abcdef";
-static void gdb_log_callback(void *priv, const char *file, int line,
+static void gdb_log_callback(void *priv, const char *file, unsigned line,
const char *function, const char *string);
-enum gdb_detach_mode
-{
- GDB_DETACH_RESUME,
- GDB_DETACH_RESET,
- GDB_DETACH_HALT,
- GDB_DETACH_NOTHING
-};
-
-/* target behaviour on gdb detach */
-enum gdb_detach_mode detach_mode = GDB_DETACH_RESUME;
-
-/* number of gdb connections, mainly to supress gdb related debugging spam
+/* number of gdb connections, mainly to suppress gdb related debugging spam
* in helper/log.c when no gdb connections are actually active */
int gdb_actual_connections;
/* set if we are sending a memory map to gdb
* via qXfer:memory-map:read packet */
/* enabled by default*/
-int gdb_use_memory_map = 1;
+static int gdb_use_memory_map = 1;
/* enabled by default*/
-int gdb_flash_program = 1;
+static int gdb_flash_program = 1;
/* if set, data aborts cause an error to be reported in memory read packets
- * see the code in gdb_read_memory_packet() for further explanations */
-int gdb_report_data_abort = 0;
+ * see the code in gdb_read_memory_packet() for further explanations.
+ * Disabled by default.
+ */
+static int gdb_report_data_abort;
-int gdb_last_signal(target_t *target)
+static int gdb_last_signal(struct target *target)
{
switch (target->debug_reason)
{
}
}
-int check_pending(connection_t *connection, int timeout_s, int *got_data)
+static int check_pending(struct connection *connection,
+ int timeout_s, int *got_data)
{
/* a non-blocking socket will block if there is 0 bytes available on the socket,
* but return with as many bytes as are available immediately
*/
struct timeval tv;
fd_set read_fds;
- gdb_connection_t *gdb_con = connection->priv;
+ struct gdb_connection *gdb_con = connection->priv;
int t;
if (got_data == NULL)
got_data=&t;
return ERROR_OK;
}
-int gdb_get_char(connection_t *connection, int* next_char)
+static int gdb_get_char_inner(struct connection *connection, int* next_char)
{
- gdb_connection_t *gdb_con = connection->priv;
+ struct gdb_connection *gdb_con = connection->priv;
int retval = ERROR_OK;
#ifdef _DEBUG_GDB_IO_
char *debug_buffer;
#endif
-
- if (gdb_con->buf_cnt-- > 0)
- {
- *next_char = *(gdb_con->buf_p++);
- if (gdb_con->buf_cnt > 0)
- connection->input_pending = 1;
- else
- connection->input_pending = 0;
-
-#ifdef _DEBUG_GDB_IO_
- LOG_DEBUG("returned char '%c' (0x%2.2x)", *next_char, *next_char);
-#endif
-
- return ERROR_OK;
- }
-
for (;;)
{
- if (connection->service->type == CONNECTION_PIPE)
+ if (connection->service->type != CONNECTION_TCP)
{
gdb_con->buf_cnt = read(connection->fd, gdb_con->buffer, GDB_BUFFER_SIZE);
}
return retval;
}
-int gdb_putback_char(connection_t *connection, int last_char)
+/**
+ * The cool thing about this fn is that it allows buf_p and buf_cnt to be
+ * held in registers in the inner loop.
+ *
+ * For small caches and embedded systems this is important!
+ */
+static inline int gdb_get_char_fast(struct connection *connection, int* next_char, char **buf_p, int *buf_cnt)
{
- gdb_connection_t *gdb_con = connection->priv;
+ int retval = ERROR_OK;
+
+ if ((*buf_cnt)-- > 0)
+ {
+ *next_char = **buf_p;
+ (*buf_p)++;
+ if (*buf_cnt > 0)
+ connection->input_pending = 1;
+ else
+ connection->input_pending = 0;
+
+#ifdef _DEBUG_GDB_IO_
+ LOG_DEBUG("returned char '%c' (0x%2.2x)", *next_char, *next_char);
+#endif
+
+ return ERROR_OK;
+ }
+
+ struct gdb_connection *gdb_con = connection->priv;
+ gdb_con->buf_p = *buf_p;
+ gdb_con->buf_cnt = *buf_cnt;
+ retval = gdb_get_char_inner(connection, next_char);
+ *buf_p = gdb_con->buf_p;
+ *buf_cnt = gdb_con->buf_cnt;
+
+ return retval;
+}
+
+
+static int gdb_get_char(struct connection *connection, int* next_char)
+{
+ struct gdb_connection *gdb_con = connection->priv;
+ return gdb_get_char_fast(connection, next_char, &gdb_con->buf_p, &gdb_con->buf_cnt);
+}
+
+
+static int gdb_putback_char(struct connection *connection, int last_char)
+{
+ struct gdb_connection *gdb_con = connection->priv;
if (gdb_con->buf_p > gdb_con->buffer)
{
/* The only way we can detect that the socket is closed is the first time
* we write to it, we will fail. Subsequent write operations will
* succeed. Shudder! */
-int gdb_write(connection_t *connection, void *data, int len)
+static int gdb_write(struct connection *connection, void *data, int len)
{
- gdb_connection_t *gdb_con = connection->priv;
+ struct gdb_connection *gdb_con = connection->priv;
if (gdb_con->closed)
return ERROR_SERVER_REMOTE_CLOSED;
- if (connection->service->type == CONNECTION_PIPE)
- {
- /* write to stdout */
- if (write(STDOUT_FILENO, data, len) == len)
- {
- return ERROR_OK;
- }
- }
- else
+ if (connection_write(connection, data, len) == len)
{
- if (write_socket(connection->fd, data, len) == len)
- {
- return ERROR_OK;
- }
+ return ERROR_OK;
}
gdb_con->closed = 1;
return ERROR_SERVER_REMOTE_CLOSED;
}
-int gdb_put_packet_inner(connection_t *connection, char *buffer, int len)
+static int gdb_put_packet_inner(struct connection *connection,
+ char *buffer, int len)
{
int i;
unsigned char my_checksum = 0;
#endif
int reply;
int retval;
- gdb_connection_t *gdb_con = connection->priv;
+ struct gdb_connection *gdb_con = connection->priv;
for (i = 0; i < len; i++)
my_checksum += buffer[i];
int gotdata;
for (;;)
{
- if ((retval = check_pending(connection, 0, &gotdata)) != ERROR_OK)
+ retval = check_pending(connection, 0, &gotdata);
+ if (retval != ERROR_OK)
return retval;
if (!gotdata)
break;
return ERROR_OK;
}
-int gdb_put_packet(connection_t *connection, char *buffer, int len)
+int gdb_put_packet(struct connection *connection, char *buffer, int len)
{
- gdb_connection_t *gdb_con = connection->priv;
+ struct gdb_connection *gdb_con = connection->priv;
gdb_con->busy = 1;
int retval = gdb_put_packet_inner(connection, buffer, len);
gdb_con->busy = 0;
return retval;
}
-static __inline__ int fetch_packet(connection_t *connection, int *checksum_ok, int noack, int *len, char *buffer)
+static __inline__ int fetch_packet(struct connection *connection, int *checksum_ok, int noack, int *len, char *buffer)
{
unsigned char my_checksum = 0;
char checksum[3];
int character;
- int retval;
+ int retval = ERROR_OK;
- gdb_connection_t *gdb_con = connection->priv;
+ struct gdb_connection *gdb_con = connection->priv;
my_checksum = 0;
int count = 0;
count = 0;
+
+ /* move this over into local variables to use registers and give the
+ * more freedom to optimize */
+ char *buf_p = gdb_con->buf_p;
+ int buf_cnt = gdb_con->buf_cnt;
+
for (;;)
{
/* The common case is that we have an entire packet with no escape chars.
* We need to leave at least 2 bytes in the buffer to have
* gdb_get_char() update various bits and bobs correctly.
*/
- if ((gdb_con->buf_cnt > 2) && ((gdb_con->buf_cnt + count) < *len))
+ if ((buf_cnt > 2) && ((buf_cnt + count) < *len))
{
/* The compiler will struggle a bit with constant propagation and
* aliasing, so we help it by showing that these values do not
* change inside the loop
*/
int i;
- char *buf = gdb_con->buf_p;
- int run = gdb_con->buf_cnt - 2;
+ char *buf = buf_p;
+ int run = buf_cnt - 2;
i = 0;
int done = 0;
while (i < run)
buffer[count++] = character & 0xff;
}
}
- gdb_con->buf_p += i;
- gdb_con->buf_cnt -= i;
+ buf_p += i;
+ buf_cnt -= i;
if (done)
break;
}
if (count > *len)
{
LOG_ERROR("packet buffer too small");
- return ERROR_GDB_BUFFER_TOO_SMALL;
+ retval = ERROR_GDB_BUFFER_TOO_SMALL;
+ break;
}
- if ((retval = gdb_get_char(connection, &character)) != ERROR_OK)
- return retval;
+ retval = gdb_get_char_fast(connection, &character, &buf_p, &buf_cnt);
+ if (retval != ERROR_OK)
+ break;
if (character == '#')
break;
/* data transmitted in binary mode (X packet)
* uses 0x7d as escape character */
my_checksum += character & 0xff;
- if ((retval = gdb_get_char(connection, &character)) != ERROR_OK)
- return retval;
+
+ retval = gdb_get_char_fast(connection, &character, &buf_p, &buf_cnt);
+ if (retval != ERROR_OK)
+ break;
+
my_checksum += character & 0xff;
buffer[count++] = (character ^ 0x20) & 0xff;
}
}
}
+ gdb_con->buf_p = buf_p;
+ gdb_con->buf_cnt = buf_cnt;
+
+ if (retval != ERROR_OK)
+ return retval;
+
*len = count;
if ((retval = gdb_get_char(connection, &character)) != ERROR_OK)
return ERROR_OK;
}
-int gdb_get_packet_inner(connection_t *connection, char *buffer, int *len)
+static int gdb_get_packet_inner(struct connection *connection,
+ char *buffer, int *len)
{
int character;
int retval;
- gdb_connection_t *gdb_con = connection->priv;
+ struct gdb_connection *gdb_con = connection->priv;
while (1)
{
break;
case '+':
/* gdb sends a dummy ack '+' at every remote connect - see remote_start_remote (remote.c)
- * incase anyone tries to debug why they receive this warning every time */
+ * in case anyone tries to debug why they receive this warning every time */
LOG_WARNING("acknowledgment received, but no packet pending");
break;
case '-':
return ERROR_OK;
}
-int gdb_get_packet(connection_t *connection, char *buffer, int *len)
+static int gdb_get_packet(struct connection *connection, char *buffer, int *len)
{
- gdb_connection_t *gdb_con = connection->priv;
+ struct gdb_connection *gdb_con = connection->priv;
gdb_con->busy = 1;
int retval = gdb_get_packet_inner(connection, buffer, len);
gdb_con->busy = 0;
return retval;
}
-int gdb_output_con(connection_t *connection, const char* line)
+static int gdb_output_con(struct connection *connection, const char* line)
{
char *hex_buffer;
int i, bin_size;
return retval;
}
-int gdb_output(struct command_context_s *context, const char* line)
+static int gdb_output(struct command_context *context, const char* line)
{
/* this will be dumped to the log and also sent as an O packet if possible */
LOG_USER_N("%s", line);
}
-static void gdb_frontend_halted(struct target_s *target, connection_t *connection)
+static void gdb_frontend_halted(struct target *target, struct connection *connection)
{
- gdb_connection_t *gdb_connection = connection->priv;
+ struct gdb_connection *gdb_connection = connection->priv;
/* In the GDB protocol when we are stepping or continuing execution,
* we have a lingering reply. Upon receiving a halted event
if (gdb_connection->frontend_state == TARGET_RUNNING)
{
char sig_reply[4];
- int signal;
+ int signal_var;
/* stop forwarding log packets! */
log_remove_callback(gdb_log_callback, connection);
if (gdb_connection->ctrl_c)
{
- signal = 0x2;
+ signal_var = 0x2;
gdb_connection->ctrl_c = 0;
}
else
{
- signal = gdb_last_signal(target);
+ signal_var = gdb_last_signal(target);
}
- snprintf(sig_reply, 4, "T%2.2x", signal);
+ snprintf(sig_reply, 4, "T%2.2x", signal_var);
gdb_put_packet(connection, sig_reply, 3);
gdb_connection->frontend_state = TARGET_HALTED;
+ rtos_update_threads( target );
}
}
-int gdb_target_callback_event_handler(struct target_s *target, enum target_event event, void *priv)
+static int gdb_target_callback_event_handler(struct target *target,
+ enum target_event event, void *priv)
{
int retval;
- connection_t *connection = priv;
+ struct connection *connection = priv;
target_handle_event(target, event);
switch (event)
return ERROR_OK;
}
-int gdb_new_connection(connection_t *connection)
+static int gdb_new_connection(struct connection *connection)
{
- gdb_connection_t *gdb_connection = malloc(sizeof(gdb_connection_t));
- gdb_service_t *gdb_service = connection->service->priv;
+ struct gdb_connection *gdb_connection = malloc(sizeof(struct gdb_connection));
+ struct gdb_service *gdb_service = connection->service->priv;
int retval;
int initial_ack;
gdb_connection->busy = 0;
gdb_connection->noack_mode = 0;
gdb_connection->sync = true;
+ gdb_connection->mem_write_error = false;
/* send ACK to GDB for debug request */
gdb_write(connection, "+", 1);
breakpoint_clear_target(gdb_service->target);
watchpoint_clear_target(gdb_service->target);
- /* register callback to be informed about target events */
- target_register_event_callback(gdb_target_callback_event_handler, connection);
-
/* remove the initial ACK from the incoming buffer */
if ((retval = gdb_get_char(connection, &initial_ack)) != ERROR_OK)
return retval;
gdb_putback_char(connection, initial_ack);
target_call_event_callbacks(gdb_service->target, TARGET_EVENT_GDB_ATTACH);
+ if (gdb_use_memory_map)
+ {
+ /* Connect must fail if the memory map can't be set up correctly.
+ *
+ * This will cause an auto_probe to be invoked, which is either
+ * a no-op or it will fail when the target isn't ready(e.g. not halted).
+ */
+ int i;
+ for (i = 0; i < flash_get_bank_count(); i++)
+ {
+ struct flash_bank *p;
+ retval = get_flash_bank_by_num(i, &p);
+ if (retval != ERROR_OK)
+ {
+ LOG_ERROR("Connect failed. Consider setting up a gdb-attach event for the target to prepare target for GDB connect, or use 'gdb_memory_map disable'.");
+ return retval;
+ }
+ }
+ }
+
gdb_actual_connections++;
LOG_DEBUG("New GDB Connection: %d, Target %s, state: %s",
gdb_actual_connections,
- gdb_service->target->cmd_name,
+ target_name(gdb_service->target),
target_state_name(gdb_service->target));
+ /* DANGER! If we fail subsequently, we must remove this handler,
+ * otherwise we occasionally see crashes as the timer can invoke the
+ * callback fn.
+ *
+ * register callback to be informed about target events */
+ target_register_event_callback(gdb_target_callback_event_handler, connection);
+
return ERROR_OK;
}
-int gdb_connection_closed(connection_t *connection)
+static int gdb_connection_closed(struct connection *connection)
{
- gdb_service_t *gdb_service = connection->service->priv;
- gdb_connection_t *gdb_connection = connection->priv;
+ struct gdb_service *gdb_service = connection->service->priv;
+ struct gdb_connection *gdb_connection = connection->priv;
/* we're done forwarding messages. Tear down callback before
* cleaning up connection.
gdb_actual_connections--;
LOG_DEBUG("GDB Close, Target: %s, state: %s, gdb_actual_connections=%d",
- gdb_service->target->cmd_name,
+ target_name(gdb_service->target),
target_state_name(gdb_service->target),
gdb_actual_connections);
return ERROR_OK;
}
-void gdb_send_error(connection_t *connection, uint8_t the_error)
+static void gdb_send_error(struct connection *connection, uint8_t the_error)
{
char err[4];
snprintf(err, 4, "E%2.2X", the_error);
gdb_put_packet(connection, err, 3);
}
-int gdb_last_signal_packet(connection_t *connection, target_t *target, char* packet, int packet_size)
+static int gdb_last_signal_packet(struct connection *connection,
+ struct target *target, char* packet, int packet_size)
{
char sig_reply[4];
- int signal;
+ int signal_var;
- signal = gdb_last_signal(target);
+ signal_var = gdb_last_signal(target);
- snprintf(sig_reply, 4, "S%2.2x", signal);
+ snprintf(sig_reply, 4, "S%2.2x", signal_var);
gdb_put_packet(connection, sig_reply, 3);
return ERROR_OK;
}
-static int gdb_reg_pos(target_t *target, int pos, int len)
+static int gdb_reg_pos(struct target *target, int pos, int len)
{
if (target->endianness == TARGET_LITTLE_ENDIAN)
return pos;
* register might be non-divisible by 8(a byte), in which
* case an entire byte is shown.
*
- * NB! the format on the wire is the target endianess
+ * NB! the format on the wire is the target endianness
*
* The format of reg->value is little endian
*
*/
-void gdb_str_to_target(target_t *target, char *tstr, reg_t *reg)
+static void gdb_str_to_target(struct target *target,
+ char *tstr, struct reg *reg)
{
int i;
uint8_t *buf;
int buf_len;
buf = reg->value;
- buf_len = CEIL(reg->size, 8);
+ buf_len = DIV_ROUND_UP(reg->size, 8);
for (i = 0; i < buf_len; i++)
{
}
}
-static int hextoint(char c)
+static int hextoint(int c)
{
if (c>='0'&&c<='9')
{
}
/* copy over in register buffer */
-void gdb_target_to_reg(target_t *target, char *tstr, int str_len, uint8_t *bin)
+static void gdb_target_to_reg(struct target *target,
+ char *tstr, int str_len, uint8_t *bin)
{
if (str_len % 2)
{
}
}
-int gdb_get_registers_packet(connection_t *connection, target_t *target, char* packet, int packet_size)
+static int gdb_get_registers_packet(struct connection *connection,
+ struct target *target, char* packet, int packet_size)
{
- reg_t **reg_list;
+ struct reg **reg_list;
int reg_list_size;
int retval;
int reg_packet_size = 0;
LOG_DEBUG("-");
#endif
+ if ( ( target->rtos != NULL ) &&
+ ( ERROR_FAIL != rtos_get_gdb_reg_list( connection, target, ®_list, ®_list_size) ) )
+ {
+ return ERROR_OK;
+ }
+
if ((retval = target_get_gdb_reg_list(target, ®_list, ®_list_size)) != ERROR_OK)
{
return gdb_error(connection, retval);
reg_packet_size += reg_list[i]->size;
}
- reg_packet = malloc(CEIL(reg_packet_size, 8) * 2);
+ reg_packet = malloc(DIV_ROUND_UP(reg_packet_size, 8) * 2);
reg_packet_p = reg_packet;
for (i = 0; i < reg_list_size; i++)
{
gdb_str_to_target(target, reg_packet_p, reg_list[i]);
- reg_packet_p += CEIL(reg_list[i]->size, 8) * 2;
+ reg_packet_p += DIV_ROUND_UP(reg_list[i]->size, 8) * 2;
}
#ifdef _DEBUG_GDB_IO_
{
char *reg_packet_p;
- reg_packet_p = strndup(reg_packet, CEIL(reg_packet_size, 8) * 2);
+ reg_packet_p = strndup(reg_packet, DIV_ROUND_UP(reg_packet_size, 8) * 2);
LOG_DEBUG("reg_packet: %s", reg_packet_p);
free(reg_packet_p);
}
#endif
- gdb_put_packet(connection, reg_packet, CEIL(reg_packet_size, 8) * 2);
+ gdb_put_packet(connection, reg_packet, DIV_ROUND_UP(reg_packet_size, 8) * 2);
free(reg_packet);
free(reg_list);
return ERROR_OK;
}
-int gdb_set_registers_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
+static int gdb_set_registers_packet(struct connection *connection,
+ struct target *target, char *packet, int packet_size)
{
int i;
- reg_t **reg_list;
+ struct reg **reg_list;
int reg_list_size;
int retval;
char *packet_p;
for (i = 0; i < reg_list_size; i++)
{
uint8_t *bin_buf;
- int chars = (CEIL(reg_list[i]->size, 8) * 2);
+ int chars = (DIV_ROUND_UP(reg_list[i]->size, 8) * 2);
if (packet_p + chars > packet + packet_size)
{
LOG_ERROR("BUG: register packet is too small for registers");
}
- reg_arch_type_t *arch_type;
- bin_buf = malloc(CEIL(reg_list[i]->size, 8));
+ bin_buf = malloc(DIV_ROUND_UP(reg_list[i]->size, 8));
gdb_target_to_reg(target, packet_p, chars, bin_buf);
- /* get register arch_type, and call set method */
- arch_type = register_get_arch_type(reg_list[i]->arch_type);
-
- arch_type->set(reg_list[i], bin_buf);
+ reg_list[i]->type->set(reg_list[i], bin_buf);
/* advance packet pointer */
packet_p += chars;
free(bin_buf);
}
- /* free reg_t *reg_list[] array allocated by get_gdb_reg_list */
+ /* free struct reg *reg_list[] array allocated by get_gdb_reg_list */
free(reg_list);
gdb_put_packet(connection, "OK", 2);
return ERROR_OK;
}
-int gdb_get_register_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
+static int gdb_get_register_packet(struct connection *connection,
+ struct target *target, char *packet, int packet_size)
{
char *reg_packet;
int reg_num = strtoul(packet + 1, NULL, 16);
- reg_t **reg_list;
+ struct reg **reg_list;
int reg_list_size;
int retval;
exit(-1);
}
- reg_packet = malloc(CEIL(reg_list[reg_num]->size, 8) * 2);
+ reg_packet = malloc(DIV_ROUND_UP(reg_list[reg_num]->size, 8) * 2);
gdb_str_to_target(target, reg_packet, reg_list[reg_num]);
- gdb_put_packet(connection, reg_packet, CEIL(reg_list[reg_num]->size, 8) * 2);
+ gdb_put_packet(connection, reg_packet, DIV_ROUND_UP(reg_list[reg_num]->size, 8) * 2);
free(reg_list);
free(reg_packet);
return ERROR_OK;
}
-int gdb_set_register_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
+static int gdb_set_register_packet(struct connection *connection,
+ struct target *target, char *packet, int packet_size)
{
char *separator;
uint8_t *bin_buf;
int reg_num = strtoul(packet + 1, &separator, 16);
- reg_t **reg_list;
+ struct reg **reg_list;
int reg_list_size;
int retval;
- reg_arch_type_t *arch_type;
LOG_DEBUG("-");
}
/* convert from GDB-string (target-endian) to hex-string (big-endian) */
- bin_buf = malloc(CEIL(reg_list[reg_num]->size, 8));
- int chars = (CEIL(reg_list[reg_num]->size, 8) * 2);
+ bin_buf = malloc(DIV_ROUND_UP(reg_list[reg_num]->size, 8));
+ int chars = (DIV_ROUND_UP(reg_list[reg_num]->size, 8) * 2);
/* fix!!! add some sanity checks on packet size here */
gdb_target_to_reg(target, separator + 1, chars, bin_buf);
- /* get register arch_type, and call set method */
- arch_type = register_get_arch_type(reg_list[reg_num]->arch_type);
- arch_type->set(reg_list[reg_num], bin_buf);
+ reg_list[reg_num]->type->set(reg_list[reg_num], bin_buf);
gdb_put_packet(connection, "OK", 2);
return ERROR_OK;
}
-int gdb_error(connection_t *connection, int retval)
+/* No attempt is made to translate the "retval" to
+ * GDB speak. This has to be done at the calling
+ * site as no mapping really exists.
+ */
+static int gdb_error(struct connection *connection, int retval)
{
- switch (retval)
- {
- case ERROR_TARGET_DATA_ABORT:
- gdb_send_error(connection, EIO);
- break;
- case ERROR_TARGET_TRANSLATION_FAULT:
- gdb_send_error(connection, EFAULT);
- break;
- case ERROR_TARGET_UNALIGNED_ACCESS:
- gdb_send_error(connection, EFAULT);
- break;
- case ERROR_TARGET_NOT_HALTED:
- gdb_send_error(connection, EFAULT);
- break;
- default:
- /* This could be that the target reset itself. */
- LOG_ERROR("unexpected error %i", retval);
- gdb_send_error(connection, EFAULT);
- break;
- }
-
+ LOG_DEBUG("Reporting %i to GDB as generic error", retval);
+ gdb_send_error(connection, EFAULT);
return ERROR_OK;
}
*
* 8191 bytes by the looks of it. Why 8191 bytes instead of 8192?????
*/
-int gdb_read_memory_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
+static int gdb_read_memory_packet(struct connection *connection,
+ struct target *target, char *packet, int packet_size)
{
char *separator;
uint32_t addr = 0;
return retval;
}
-int gdb_write_memory_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
+static int gdb_write_memory_packet(struct connection *connection,
+ struct target *target, char *packet, int packet_size)
{
char *separator;
uint32_t addr = 0;
return retval;
}
-int gdb_write_memory_binary_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
+static int gdb_write_memory_binary_packet(struct connection *connection,
+ struct target *target, char *packet, int packet_size)
{
char *separator;
uint32_t addr = 0;
uint32_t len = 0;
- int retval;
+ int retval = ERROR_OK;
/* skip command character */
packet++;
return ERROR_SERVER_REMOTE_CLOSED;
}
- retval = ERROR_OK;
- if (len)
- {
- LOG_DEBUG("addr: 0x%8.8" PRIx32 ", len: 0x%8.8" PRIx32 "", addr, len);
+ struct gdb_connection *gdb_connection = connection->priv;
- retval = target_write_buffer(target, addr, len, (uint8_t*)separator);
+ if (gdb_connection->mem_write_error)
+ {
+ retval = ERROR_FAIL;
+ /* now that we have reported the memory write error, we can clear the condition */
+ gdb_connection->mem_write_error = false;
}
+ /* By replying the packet *immediately* GDB will send us a new packet
+ * while we write the last one to the target.
+ */
if (retval == ERROR_OK)
{
gdb_put_packet(connection, "OK", 2);
return retval;
}
+ if (len)
+ {
+ LOG_DEBUG("addr: 0x%8.8" PRIx32 ", len: 0x%8.8" PRIx32 "", addr, len);
+
+ retval = target_write_buffer(target, addr, len, (uint8_t*)separator);
+ if (retval != ERROR_OK)
+ {
+ gdb_connection->mem_write_error = true;
+ }
+ }
+
return ERROR_OK;
}
-int gdb_step_continue_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
+static int gdb_step_continue_packet(struct connection *connection,
+ struct target *target, char *packet, int packet_size)
{
int current = 0;
uint32_t address = 0x0;
return retval;
}
-int gdb_breakpoint_watchpoint_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
+static int gdb_breakpoint_watchpoint_packet(struct connection *connection,
+ struct target *target, char *packet, int packet_size)
{
int type;
enum breakpoint_type bp_type = BKPT_SOFT /* dummy init to avoid warning */;
- enum watchpoint_rw wp_type;
+ enum watchpoint_rw wp_type = WPT_READ /* dummy init to avoid warning */;
uint32_t address;
uint32_t size;
char *separator;
wp_type = WPT_READ;
else if (type == 4) /* access watchpoint */
wp_type = WPT_ACCESS;
+ else
+ {
+ LOG_ERROR("invalid gdb watch/breakpoint type(%d), dropping connection", type);
+ return ERROR_SERVER_REMOTE_CLOSED;
+ }
+
if (gdb_breakpoint_override && ((bp_type == BKPT_SOFT)||(bp_type == BKPT_HARD)))
{
{
if (packet[0] == 'Z')
{
- if ((retval = watchpoint_add(target, address, size, type-2, 0, 0xffffffffu)) != ERROR_OK)
+ if ((retval = watchpoint_add(target, address, size, wp_type, 0, 0xffffffffu)) != ERROR_OK)
{
if ((retval = gdb_error(connection, retval)) != ERROR_OK)
return retval;
return ERROR_OK;
}
-/* print out a string and allocate more space as needed, mainly used for XML at this point */
-void xml_printf(int *retval, char **xml, int *pos, int *size, const char *fmt, ...)
+/* print out a string and allocate more space as needed,
+ * mainly used for XML at this point
+ */
+static void xml_printf(int *retval, char **xml, int *pos, int *size,
+ const char *fmt, ...)
{
if (*retval != ERROR_OK)
{
return 0;
}
-int gdb_calc_blocksize(flash_bank_t *bank)
-{
- uint32_t i;
- uint32_t block_size = 0xffffffff;
-
- /* loop through all sectors and return smallest sector size */
-
- for (i = 0; i < (uint32_t)bank->num_sectors; i++)
- {
- if (bank->sectors[i].size < block_size)
- block_size = bank->sectors[i].size;
- }
-
- return block_size;
-}
-
static int compare_bank (const void * a, const void * b)
{
- flash_bank_t *b1, *b2;
- b1=*((flash_bank_t **)a);
- b2=*((flash_bank_t **)b);
+ struct flash_bank *b1, *b2;
+ b1=*((struct flash_bank **)a);
+ b2=*((struct flash_bank **)b);
if (b1->base == b2->base)
{
}
}
-int gdb_query_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
+static int gdb_memory_map(struct connection *connection,
+ struct target *target, char *packet, int packet_size)
{
- command_context_t *cmd_ctx = connection->cmd_ctx;
- gdb_connection_t *gdb_connection = connection->priv;
+ /* We get away with only specifying flash here. Regions that are not
+ * specified are treated as if we provided no memory map(if not we
+ * could detect the holes and mark them as RAM).
+ * Normally we only execute this code once, but no big deal if we
+ * have to regenerate it a couple of times.
+ */
+
+ struct flash_bank *p;
+ char *xml = NULL;
+ int size = 0;
+ int pos = 0;
+ int retval = ERROR_OK;
+ struct flash_bank **banks;
+ int offset;
+ int length;
+ char *separator;
+ uint32_t ram_start = 0;
+ int i;
+ int target_flash_banks = 0;
+
+ /* skip command character */
+ packet += 23;
+
+ offset = strtoul(packet, &separator, 16);
+ length = strtoul(separator + 1, &separator, 16);
+
+ xml_printf(&retval, &xml, &pos, &size, "<memory-map>\n");
+
+ /* Sort banks in ascending order. We need to report non-flash
+ * memory as ram (or rather read/write) by default for GDB, since
+ * it has no concept of non-cacheable read/write memory (i/o etc).
+ *
+ * FIXME Most non-flash addresses are *NOT* RAM! Don't lie.
+ * Current versions of GDB assume unlisted addresses are RAM...
+ */
+ banks = malloc(sizeof(struct flash_bank *)*flash_get_bank_count());
+
+ for (i = 0; i < flash_get_bank_count(); i++) {
+ retval = get_flash_bank_by_num(i, &p);
+ if (retval != ERROR_OK)
+ {
+ free(banks);
+ gdb_error(connection, retval);
+ return retval;
+ }
+ if(p->target == target)
+ banks[target_flash_banks++] = p;
+ }
+
+ qsort(banks, target_flash_banks, sizeof(struct flash_bank *),
+ compare_bank);
+
+ for (i = 0; i < flash_get_bank_count(); i++) {
+ int j;
+ unsigned sector_size = 0;
+ uint32_t start, end;
+
+ p = banks[i];
+ start = p->base;
+ end = p->base + p->size;
+
+ if (ram_start < p->base)
+ xml_printf(&retval, &xml, &pos, &size,
+ "<memory type=\"ram\" start=\"0x%x\" "
+ "length=\"0x%x\"/>\n",
+ ram_start, p->base - ram_start);
+
+ /* Report adjacent groups of same-size sectors. So for
+ * example top boot CFI flash will list an initial region
+ * with several large sectors (maybe 128KB) and several
+ * smaller ones at the end (maybe 32KB). STR7 will have
+ * regions with 8KB, 32KB, and 64KB sectors; etc.
+ */
+ for (j = 0; j < p->num_sectors; j++) {
+ unsigned group_len;
+
+ /* Maybe start a new group of sectors. */
+ if (sector_size == 0) {
+ start = p->base + p->sectors[j].offset;
+ xml_printf(&retval, &xml, &pos, &size,
+ "<memory type=\"flash\" "
+ "start=\"0x%x\" ",
+ start);
+ sector_size = p->sectors[j].size;
+ }
+
+ /* Does this finish a group of sectors?
+ * If not, continue an already-started group.
+ */
+ if (j == p->num_sectors -1)
+ group_len = (p->base + p->size) - start;
+ else if (p->sectors[j + 1].size != sector_size)
+ group_len = p->base + p->sectors[j + 1].offset
+ - start;
+ else
+ continue;
+
+ xml_printf(&retval, &xml, &pos, &size,
+ "length=\"0x%x\">\n"
+ "<property name=\"blocksize\">"
+ "0x%x</property>\n"
+ "</memory>\n",
+ group_len,
+ sector_size);
+ sector_size = 0;
+ }
+
+ ram_start = p->base + p->size;
+ }
+
+ if (ram_start != 0)
+ xml_printf(&retval, &xml, &pos, &size,
+ "<memory type=\"ram\" start=\"0x%x\" "
+ "length=\"0x%x\"/>\n",
+ ram_start, 0-ram_start);
+ /* ELSE a flash chip could be at the very end of the 32 bit address
+ * space, in which case ram_start will be precisely 0
+ */
+
+ free(banks);
+ banks = NULL;
+
+ xml_printf(&retval, &xml, &pos, &size, "</memory-map>\n");
+
+ if (retval != ERROR_OK) {
+ gdb_error(connection, retval);
+ return retval;
+ }
+
+ if (offset + length > pos)
+ length = pos - offset;
+
+ char *t = malloc(length + 1);
+ t[0] = 'l';
+ memcpy(t + 1, xml + offset, length);
+ gdb_put_packet(connection, t, length + 1);
+
+ free(t);
+ free(xml);
+ return ERROR_OK;
+}
+
+static int gdb_query_packet(struct connection *connection,
+ struct target *target, char *packet, int packet_size)
+{
+ struct command_context *cmd_ctx = connection->cmd_ctx;
+ struct gdb_connection *gdb_connection = connection->priv;
if (strstr(packet, "qRcmd,"))
{
return ERROR_OK;
}
- else if (strstr(packet, "qXfer:memory-map:read::") && (flash_get_bank_count() > 0))
- {
- /* We get away with only specifying flash here. Regions that are not
- * specified are treated as if we provided no memory map(if not we
- * could detect the holes and mark them as RAM).
- * Normally we only execute this code once, but no big deal if we
- * have to regenerate it a couple of times. */
-
- flash_bank_t *p;
- char *xml = NULL;
- int size = 0;
- int pos = 0;
- int retval = ERROR_OK;
-
- int offset;
- int length;
- char *separator;
- int blocksize;
-
- /* skip command character */
- packet += 23;
-
- offset = strtoul(packet, &separator, 16);
- length = strtoul(separator + 1, &separator, 16);
-
- xml_printf(&retval, &xml, &pos, &size, "<memory-map>\n");
-
- /*
- sort banks in ascending order, we need to make non-flash memory be ram(or rather
- read/write) by default for GDB.
- GDB does not have a concept of non-cacheable read/write memory.
- */
- flash_bank_t **banks = malloc(sizeof(flash_bank_t *)*flash_get_bank_count());
- int i;
-
- for (i = 0; i < flash_get_bank_count(); i++)
- {
- p = get_flash_bank_by_num(i);
- if (p == NULL)
- {
- free(banks);
- retval = ERROR_FAIL;
- gdb_send_error(connection, retval);
- return retval;
- }
- banks[i]=p;
- }
-
- qsort(banks, flash_get_bank_count(), sizeof(flash_bank_t *), compare_bank);
-
- uint32_t ram_start = 0;
- for (i = 0; i < flash_get_bank_count(); i++)
- {
- p = banks[i];
-
- if (ram_start < p->base)
- {
- xml_printf(&retval, &xml, &pos, &size, "<memory type=\"ram\" start=\"0x%x\" length=\"0x%x\"/>\n",
- ram_start, p->base-ram_start);
- }
-
- /* if device has uneven sector sizes, eg. str7, lpc
- * we pass the smallest sector size to gdb memory map */
- blocksize = gdb_calc_blocksize(p);
-
- xml_printf(&retval, &xml, &pos, &size, "<memory type=\"flash\" start=\"0x%x\" length=\"0x%x\">\n" \
- "<property name=\"blocksize\">0x%x</property>\n" \
- "</memory>\n", \
- p->base, p->size, blocksize);
- ram_start = p->base + p->size;
- }
- if (ram_start != 0)
- {
- xml_printf(&retval, &xml, &pos, &size, "<memory type=\"ram\" start=\"0x%x\" length=\"0x%x\"/>\n",
- ram_start, 0-ram_start);
- } else
- {
- /* a flash chip could be at the very end of the 32 bit address space, in which case
- ram_start will be precisely 0 */
- }
-
- free(banks);
- banks = NULL;
-
- xml_printf(&retval, &xml, &pos, &size, "</memory-map>\n");
-
- if (retval != ERROR_OK)
- {
- gdb_send_error(connection, retval);
- return retval;
- }
-
- if (offset + length > pos)
- {
- length = pos - offset;
- }
-
- char *t = malloc(length + 1);
- t[0] = 'l';
- memcpy(t + 1, xml + offset, length);
- gdb_put_packet(connection, t, length + 1);
-
- free(t);
- free(xml);
- return ERROR_OK;
- }
+ else if (strstr(packet, "qXfer:memory-map:read::")
+ && (flash_get_bank_count() > 0))
+ return gdb_memory_map(connection, target, packet, packet_size);
else if (strstr(packet, "qXfer:features:read:"))
{
char *xml = NULL;
if (retval != ERROR_OK)
{
- gdb_send_error(connection, retval);
+ gdb_error(connection, retval);
return retval;
}
return ERROR_OK;
}
-int gdb_v_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
+static int gdb_v_packet(struct connection *connection,
+ struct target *target, char *packet, int packet_size)
{
- gdb_connection_t *gdb_connection = connection->priv;
- gdb_service_t *gdb_service = connection->service->priv;
+ struct gdb_connection *gdb_connection = connection->priv;
+ struct gdb_service *gdb_service = connection->service->priv;
int result;
/* if flash programming disabled - send a empty reply */
flash_set_dirty();
/* perform any target specific operations before the erase */
- target_call_event_callbacks(gdb_service->target, TARGET_EVENT_GDB_FLASH_ERASE_START);
- result = flash_erase_address_range(gdb_service->target, addr, length);
- target_call_event_callbacks(gdb_service->target, TARGET_EVENT_GDB_FLASH_ERASE_END);
+ target_call_event_callbacks(gdb_service->target,
+ TARGET_EVENT_GDB_FLASH_ERASE_START);
+
+ /* vFlashErase:addr,length messages require region start and
+ * end to be "block" aligned ... if padding is ever needed,
+ * GDB will have become dangerously confused.
+ */
+ result = flash_erase_address_range(gdb_service->target,
+ false, addr, length);
+
+ /* perform any target specific operations after the erase */
+ target_call_event_callbacks(gdb_service->target,
+ TARGET_EVENT_GDB_FLASH_ERASE_END);
/* perform erase */
if (result != ERROR_OK)
/* create a new image if there isn't already one */
if (gdb_connection->vflash_image == NULL)
{
- gdb_connection->vflash_image = malloc(sizeof(image_t));
+ gdb_connection->vflash_image = malloc(sizeof(struct image));
image_open(gdb_connection->vflash_image, "", "build");
}
return ERROR_OK;
}
-int gdb_detach(connection_t *connection, target_t *target)
+static int gdb_detach(struct connection *connection, struct target *target)
{
+ struct gdb_service *gdb_service = connection->service->priv;
- switch (detach_mode)
- {
- case GDB_DETACH_RESUME:
- target_handle_event(target, TARGET_EVENT_OLD_pre_resume);
- target_resume(target, 1, 0, 1, 0);
- break;
-
- case GDB_DETACH_RESET:
- /* FIX?? make this configurable?? */
- target_process_reset(connection->cmd_ctx, RESET_HALT);
- break;
-
- case GDB_DETACH_HALT:
- target_halt(target);
- break;
+ target_call_event_callbacks(gdb_service->target,
+ TARGET_EVENT_GDB_DETACH);
- case GDB_DETACH_NOTHING:
- break;
- }
-
- gdb_put_packet(connection, "OK", 2);
- return ERROR_OK;
+ return gdb_put_packet(connection, "OK", 2);
}
-static void gdb_log_callback(void *priv, const char *file, int line,
+static void gdb_log_callback(void *priv, const char *file, unsigned line,
const char *function, const char *string)
{
- connection_t *connection = priv;
- gdb_connection_t *gdb_con = connection->priv;
+ struct connection *connection = priv;
+ struct gdb_connection *gdb_con = connection->priv;
if (gdb_con->busy)
{
gdb_output_con(connection, string);
}
-/* Do not allocate this on the stack */
-char gdb_packet_buffer[GDB_BUFFER_SIZE];
-
-static void gdb_sig_halted(connection_t *connection)
+static void gdb_sig_halted(struct connection *connection)
{
char sig_reply[4];
snprintf(sig_reply, 4, "T%2.2x", 2);
}
-int gdb_input_inner(connection_t *connection)
+static int gdb_input_inner(struct connection *connection)
{
- gdb_service_t *gdb_service = connection->service->priv;
- target_t *target = gdb_service->target;
+ /* Do not allocate this on the stack */
+ static char gdb_packet_buffer[GDB_BUFFER_SIZE];
+
+ struct gdb_service *gdb_service = connection->service->priv;
+ struct target *target = gdb_service->target;
char *packet = gdb_packet_buffer;
int packet_size;
int retval;
- gdb_connection_t *gdb_con = connection->priv;
+ struct gdb_connection *gdb_con = connection->priv;
static int extended_protocol = 0;
- /* drain input buffer */
+ /* drain input buffer. If one of the packets fail, then an error
+ * packet is replied, if applicable.
+ *
+ * This loop will terminate and the error code is returned.
+ *
+ * The calling fn will check if this error is something that
+ * can be recovered from, or if the connection must be closed.
+ *
+ * If the error is recoverable, this fn is called again to
+ * drain the rest of the buffer.
+ */
do
{
packet_size = GDB_BUFFER_SIZE-1;
- if ((retval = gdb_get_packet(connection, packet, &packet_size)) != ERROR_OK)
- {
+ retval = gdb_get_packet(connection, packet, &packet_size);
+ if (retval != ERROR_OK)
return retval;
- }
/* terminate with zero */
packet[packet_size] = 0;
retval = ERROR_OK;
switch (packet[0])
{
- case 'H':
- /* Hct... -- set thread
- * we don't have threads, send empty reply */
- gdb_put_packet(connection, NULL, 0);
- break;
+ case 'T': // Is thread alive?
+ gdb_thread_packet(connection, target, packet, packet_size);
+ break;
+ case 'H': // Set current thread ( 'c' for step and continue, 'g' for all other operations )
+ gdb_thread_packet(connection, target, packet, packet_size);
+ break;
case 'q':
case 'Q':
- retval = gdb_query_packet(connection, target, packet, packet_size);
+ retval = gdb_thread_packet(connection,
+ target, packet,
+ packet_size);
+ if ( retval == GDB_THREAD_PACKET_NOT_CONSUMED )
+ {
+ retval = gdb_query_packet(connection,
+ target, packet,
+ packet_size);
+ }
break;
case 'g':
- retval = gdb_get_registers_packet(connection, target, packet, packet_size);
+ retval = gdb_get_registers_packet(
+ connection, target,
+ packet, packet_size);
break;
case 'G':
- retval = gdb_set_registers_packet(connection, target, packet, packet_size);
+ retval = gdb_set_registers_packet(
+ connection, target,
+ packet, packet_size);
break;
case 'p':
- retval = gdb_get_register_packet(connection, target, packet, packet_size);
+ retval = gdb_get_register_packet(
+ connection, target,
+ packet, packet_size);
break;
case 'P':
- retval = gdb_set_register_packet(connection, target, packet, packet_size);
+ retval = gdb_set_register_packet(
+ connection, target,
+ packet, packet_size);
break;
case 'm':
- retval = gdb_read_memory_packet(connection, target, packet, packet_size);
+ retval = gdb_read_memory_packet(
+ connection, target,
+ packet, packet_size);
break;
case 'M':
- retval = gdb_write_memory_packet(connection, target, packet, packet_size);
+ retval = gdb_write_memory_packet(
+ connection, target,
+ packet, packet_size);
break;
case 'z':
case 'Z':
retval = gdb_breakpoint_watchpoint_packet(connection, target, packet, packet_size);
break;
case '?':
- gdb_last_signal_packet(connection, target, packet, packet_size);
+ gdb_last_signal_packet(
+ connection, target,
+ packet, packet_size);
break;
case 'c':
case 's':
{
- int retval = ERROR_OK;
-
- gdb_connection_t *gdb_con = connection->priv;
log_add_callback(gdb_log_callback, connection);
+ if (gdb_con->mem_write_error)
+ {
+ LOG_ERROR("Memory write failure!");
+
+ /* now that we have reported the memory write error, we can clear the condition */
+ gdb_con->mem_write_error = false;
+ }
+
bool nostep = false;
+ bool already_running = false;
if (target->state == TARGET_RUNNING)
{
- LOG_WARNING("The target is already running. Halt target before stepi/continue.");
- retval = target_halt(target);
- if (retval == ERROR_OK)
- retval = target_wait_state(target, TARGET_HALTED, 100);
+ LOG_WARNING("WARNING! The target is already running. "
+ "All changes GDB did to registers will be discarded! "
+ "Waiting for target to halt.");
+ already_running = true;
} else if (target->state != TARGET_HALTED)
{
LOG_WARNING("The target is not in the halted nor running stated, stepi/continue ignored.");
}
gdb_con->sync = false;
- if ((retval!=ERROR_OK) || nostep)
+ if (!already_running && nostep)
{
/* Either the target isn't in the halted state, then we can't
* step/continue. This might be early setup, etc.
*/
gdb_con->frontend_state = TARGET_RUNNING;
target_call_event_callbacks(target, TARGET_EVENT_GDB_START);
- int retval = gdb_step_continue_packet(connection, target, packet, packet_size);
- if (retval != ERROR_OK)
+
+ if (!already_running)
{
- /* we'll never receive a halted condition... issue a false one.. */
- gdb_frontend_halted(target, connection);
+ /* Here we don't want packet processing to stop even if this fails,
+ * so we use a local variable instead of retval. */
+ retval = gdb_step_continue_packet(connection, target, packet, packet_size);
+ if (retval != ERROR_OK)
+ {
+ /* we'll never receive a halted condition... issue a false one.. */
+ gdb_frontend_halted(target, connection);
+ }
}
}
}
break;
case 'v':
- retval = gdb_v_packet(connection, target, packet, packet_size);
+ retval = gdb_v_packet(
+ connection, target,
+ packet, packet_size);
break;
case 'D':
retval = gdb_detach(connection, target);
extended_protocol = 0;
break;
case 'X':
- if ((retval = gdb_write_memory_binary_packet(connection, target, packet, packet_size)) != ERROR_OK)
+ retval = gdb_write_memory_binary_packet(
+ connection, target,
+ packet, packet_size);
+ if (retval != ERROR_OK)
return retval;
break;
case 'k':
watchpoint_clear_target(gdb_service->target);
command_run_linef(connection->cmd_ctx,
"ocd_gdb_restart %s",
- target->cmd_name);
+ target_name(target));
+ gdb_put_packet(connection, "OK", 2);
break;
+
+ case 'j':
+ /* packet supported only by smp target i.e cortex_a.c*/
+ /* handle smp packet replying coreid played to gbd */
+ gdb_read_smp_packet(
+ connection, target,
+ packet, packet_size);
+ break;
+
+ case 'J':
+ /* packet supported only by smp target i.e cortex_a.c */
+ /* handle smp packet setting coreid to be played at next
+ * resume to gdb */
+ gdb_write_smp_packet(
+ connection, target,
+ packet, packet_size);
+ break;
+
default:
- /* ignore unkown packets */
+ /* ignore unknown packets */
LOG_DEBUG("ignoring 0x%2.2x packet", packet[0]);
gdb_put_packet(connection, NULL, 0);
break;
retval = target_halt(target);
if (retval != ERROR_OK)
{
- /* stop this debug session */
target_call_event_callbacks(target, TARGET_EVENT_GDB_HALT);
}
gdb_con->ctrl_c = 0;
+ } else
+ {
+ LOG_INFO("The target is not running when halt was requested, stopping GDB.");
+ target_call_event_callbacks(target, TARGET_EVENT_GDB_HALT);
}
}
return ERROR_OK;
}
-int gdb_input(connection_t *connection)
+static int gdb_input(struct connection *connection)
{
int retval = gdb_input_inner(connection);
- gdb_connection_t *gdb_con = connection->priv;
+ struct gdb_connection *gdb_con = connection->priv;
if (retval == ERROR_SERVER_REMOTE_CLOSED)
return retval;
return ERROR_OK;
}
-int gdb_init(void)
+static int gdb_target_start(struct target *target, const char *port)
{
- gdb_service_t *gdb_service;
- target_t *target = all_targets;
- if (!target)
+ struct gdb_service *gdb_service;
+ int ret;
+ gdb_service = malloc(sizeof(struct gdb_service));
+
+ if (NULL == gdb_service)
+ return -ENOMEM;
+
+ gdb_service->target = target;
+ gdb_service->core[0] = -1;
+ gdb_service->core[1] = -1;
+ target->gdb_service = gdb_service;
+
+ ret = add_service("gdb",
+ port, 1, &gdb_new_connection, &gdb_input,
+ &gdb_connection_closed, gdb_service);
+ /* initialialize all targets gdb service with the same pointer */
{
- LOG_WARNING("no gdb ports allocated as no target has been specified");
- return ERROR_OK;
+ struct target_list *head;
+ struct target *curr;
+ head = target->head;
+ while(head != (struct target_list*)NULL)
+ {
+ curr = head->target;
+ if (curr != target) curr->gdb_service = gdb_service;
+ head = head->next;
+ }
}
+ return ret;
+}
- if (gdb_port == 0 && server_use_pipes == 0)
- {
- LOG_INFO("gdb port disabled");
- return ERROR_OK;
+static int gdb_target_add_one(struct target *target)
+{
+ /* one gdb instance per smp list */
+ if ((target->smp) && (target->gdb_service)) return ERROR_OK;
+ int retval = gdb_target_start(target, gdb_port_next);
+ if (retval == ERROR_OK)
+ {
+ long portnumber;
+ /* If we can parse the port number
+ * then we increment the port number for the next target.
+ */
+ char *end;
+ portnumber = strtol(gdb_port_next, &end, 0);
+ if (!*end)
+ {
+ if (parse_long(gdb_port_next, &portnumber) == ERROR_OK)
+ {
+ free((void *)gdb_port_next);
+ gdb_port_next = alloc_printf("%d", portnumber+1);
+ }
+ }
}
+ return retval;
+}
- if (server_use_pipes)
+int gdb_target_add_all(struct target *target)
+{
+ if (NULL == target)
{
- /* only a single gdb connection when using a pipe */
-
- gdb_service = malloc(sizeof(gdb_service_t));
- gdb_service->target = target;
-
- add_service("gdb", CONNECTION_PIPE, 0, 1, gdb_new_connection, gdb_input, gdb_connection_closed, gdb_service);
-
- LOG_DEBUG("gdb service for target %s using pipes",
- target_get_name(target));
+ LOG_WARNING("gdb services need one or more targets defined");
+ return ERROR_OK;
}
- else
+
+ while (NULL != target)
{
- unsigned short port = gdb_port;
+ int retval = gdb_target_add_one(target);
+ if (ERROR_OK != retval)
+ return retval;
- while (target)
- {
- gdb_service = malloc(sizeof(gdb_service_t));
- gdb_service->target = target;
-
- add_service("gdb", CONNECTION_TCP,
- port, 1,
- gdb_new_connection, gdb_input,
- gdb_connection_closed, gdb_service);
-
- LOG_DEBUG("gdb service for target %s at TCP port %i",
- target_get_name(target),
- port);
- target = target->next;
- port++;
- }
+ target = target->next;
}
return ERROR_OK;
}
-int handle_gdb_sync_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+COMMAND_HANDLER(handle_gdb_sync_command)
{
- if (argc != 0)
+ if (CMD_ARGC != 0)
{
return ERROR_COMMAND_SYNTAX_ERROR;
}
if (current_gdb_connection == NULL)
{
- command_print(cmd_ctx,
+ command_print(CMD_CTX,
"gdb_sync command can only be run from within gdb using \"monitor gdb_sync\"");
return ERROR_FAIL;
}
}
/* daemon configuration command gdb_port */
-int handle_gdb_port_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+COMMAND_HANDLER(handle_gdb_port_command)
{
- if (argc == 0)
- {
- command_print(cmd_ctx, "%d", gdb_port);
- return ERROR_OK;
- }
-
- gdb_port = strtoul(args[0], NULL, 0);
-
- return ERROR_OK;
-}
-
-int handle_gdb_detach_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- if (argc == 1)
- {
- if (strcmp(args[0], "resume") == 0)
- {
- detach_mode = GDB_DETACH_RESUME;
- return ERROR_OK;
- }
- else if (strcmp(args[0], "reset") == 0)
- {
- detach_mode = GDB_DETACH_RESET;
- return ERROR_OK;
- }
- else if (strcmp(args[0], "halt") == 0)
- {
- detach_mode = GDB_DETACH_HALT;
- return ERROR_OK;
- }
- else if (strcmp(args[0], "nothing") == 0)
- {
- detach_mode = GDB_DETACH_NOTHING;
- return ERROR_OK;
- }
- else
- LOG_WARNING("invalid gdb_detach configuration directive: %s", args[0]);
+ int retval = CALL_COMMAND_HANDLER(server_pipe_command, &gdb_port);
+ if (ERROR_OK == retval) {
+ free((void*)gdb_port_next);
+ gdb_port_next = strdup(gdb_port);
}
-
- return ERROR_COMMAND_SYNTAX_ERROR;
+ return retval;
}
-int handle_gdb_memory_map_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+COMMAND_HANDLER(handle_gdb_memory_map_command)
{
- if (argc == 1)
- {
- if (strcmp(args[0], "enable") == 0)
- {
- gdb_use_memory_map = 1;
- return ERROR_OK;
- }
- else if (strcmp(args[0], "disable") == 0)
- {
- gdb_use_memory_map = 0;
- return ERROR_OK;
- }
- else
- LOG_WARNING("invalid gdb_memory_map configuration directive %s", args[0]);
- }
+ if (CMD_ARGC != 1)
+ return ERROR_COMMAND_SYNTAX_ERROR;
- return ERROR_COMMAND_SYNTAX_ERROR;
+ COMMAND_PARSE_ENABLE(CMD_ARGV[0], gdb_use_memory_map);
+ return ERROR_OK;
}
-int handle_gdb_flash_program_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+COMMAND_HANDLER(handle_gdb_flash_program_command)
{
- if (argc == 1)
- {
- if (strcmp(args[0], "enable") == 0)
- {
- gdb_flash_program = 1;
- return ERROR_OK;
- }
- else if (strcmp(args[0], "disable") == 0)
- {
- gdb_flash_program = 0;
- return ERROR_OK;
- }
- else
- LOG_WARNING("invalid gdb_flash_program configuration directive: %s", args[0]);
- }
+ if (CMD_ARGC != 1)
+ return ERROR_COMMAND_SYNTAX_ERROR;
- return ERROR_COMMAND_SYNTAX_ERROR;
+ COMMAND_PARSE_ENABLE(CMD_ARGV[0], gdb_flash_program);
+ return ERROR_OK;
}
-int handle_gdb_report_data_abort_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+COMMAND_HANDLER(handle_gdb_report_data_abort_command)
{
- if (argc == 1)
- {
- if (strcmp(args[0], "enable") == 0)
- {
- gdb_report_data_abort = 1;
- return ERROR_OK;
- }
- else if (strcmp(args[0], "disable") == 0)
- {
- gdb_report_data_abort = 0;
- return ERROR_OK;
- }
- else
- LOG_WARNING("invalid gdb_report_data_abort configuration directive: %s", args[0]);
- }
+ if (CMD_ARGC != 1)
+ return ERROR_COMMAND_SYNTAX_ERROR;
- return ERROR_COMMAND_SYNTAX_ERROR;
+ COMMAND_PARSE_ENABLE(CMD_ARGV[0], gdb_report_data_abort);
+ return ERROR_OK;
}
/* gdb_breakpoint_override */
-int handle_gdb_breakpoint_override_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+COMMAND_HANDLER(handle_gdb_breakpoint_override_command)
{
- if (argc == 0)
+ if (CMD_ARGC == 0)
{
- } else if (argc == 1)
+ } else if (CMD_ARGC == 1)
{
gdb_breakpoint_override = 1;
- if (strcmp(args[0], "hard") == 0)
+ if (strcmp(CMD_ARGV[0], "hard") == 0)
{
gdb_breakpoint_override_type = BKPT_HARD;
- } else if (strcmp(args[0], "soft") == 0)
+ } else if (strcmp(CMD_ARGV[0], "soft") == 0)
{
gdb_breakpoint_override_type = BKPT_SOFT;
- } else if (strcmp(args[0], "disable") == 0)
+ } else if (strcmp(CMD_ARGV[0], "disable") == 0)
{
gdb_breakpoint_override = 0;
}
LOG_USER("force %s breakpoints", (gdb_breakpoint_override_type == BKPT_HARD)?"hard":"soft");
} else
{
- LOG_USER("breakpoint type is not overriden");
+ LOG_USER("breakpoint type is not overridden");
}
return ERROR_OK;
}
-int gdb_register_commands(command_context_t *command_context)
+static const struct command_registration gdb_command_handlers[] = {
+ {
+ .name = "gdb_sync",
+ .handler = handle_gdb_sync_command,
+ .mode = COMMAND_ANY,
+ .help = "next stepi will return immediately allowing "
+ "GDB to fetch register state without affecting "
+ "target state",
+ },
+ {
+ .name = "gdb_port",
+ .handler = handle_gdb_port_command,
+ .mode = COMMAND_ANY,
+ .help = "Normally gdb listens to a TCP/IP port. Each subsequent GDB "
+ "server listens for the next port number after the "
+ "base port number specified. "
+ "No arguments reports GDB port. \"pipe\" means listen to stdin "
+ "output to stdout, an integer is base port number, \"disable\" disables "
+ "port. Any other string is are interpreted as named pipe to listen to. "
+ "Output pipe is the same name as input pipe, but with 'o' appended.",
+ .usage = "[port_num]",
+ },
+ {
+ .name = "gdb_memory_map",
+ .handler = handle_gdb_memory_map_command,
+ .mode = COMMAND_CONFIG,
+ .help = "enable or disable memory map",
+ .usage = "('enable'|'disable')"
+ },
+ {
+ .name = "gdb_flash_program",
+ .handler = handle_gdb_flash_program_command,
+ .mode = COMMAND_CONFIG,
+ .help = "enable or disable flash program",
+ .usage = "('enable'|'disable')"
+ },
+ {
+ .name = "gdb_report_data_abort",
+ .handler = handle_gdb_report_data_abort_command,
+ .mode = COMMAND_CONFIG,
+ .help = "enable or disable reporting data aborts",
+ .usage = "('enable'|'disable')"
+ },
+ {
+ .name = "gdb_breakpoint_override",
+ .handler = handle_gdb_breakpoint_override_command,
+ .mode = COMMAND_ANY,
+ .help = "Display or specify type of breakpoint "
+ "to be used by gdb 'break' commands.",
+ .usage = "('hard'|'soft'|'disable')"
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
+int gdb_register_commands(struct command_context *cmd_ctx)
{
- register_command(command_context, NULL, "gdb_sync", handle_gdb_sync_command,
- COMMAND_ANY, "next stepi will return immediately allowing GDB fetch register state without affecting target state");
- register_command(command_context, NULL, "gdb_port", handle_gdb_port_command,
- COMMAND_ANY, "daemon configuration command gdb_port");
- register_command(command_context, NULL, "gdb_detach", handle_gdb_detach_command,
- COMMAND_CONFIG, "resume/reset/halt/nothing - "
- "specify behavior when GDB detaches from the target");
- register_command(command_context, NULL, "gdb_memory_map", handle_gdb_memory_map_command,
- COMMAND_CONFIG, "enable or disable memory map");
- register_command(command_context, NULL, "gdb_flash_program", handle_gdb_flash_program_command,
- COMMAND_CONFIG, "enable or disable flash program");
- register_command(command_context, NULL, "gdb_report_data_abort", handle_gdb_report_data_abort_command,
- COMMAND_CONFIG, "enable or disable reporting data aborts");
- register_command(command_context, NULL, "gdb_breakpoint_override", handle_gdb_breakpoint_override_command,
- COMMAND_EXEC, "hard/soft/disable - force breakpoint type for gdb 'break' commands.");
- return ERROR_OK;
+ gdb_port = strdup("3333");
+ gdb_port_next = strdup("3333");
+ return register_commands(cmd_ctx, NULL, gdb_command_handlers);
}
projects / fw / openocd / blobdiff