AC_PREREQ(2.60)
-AC_INIT([openocd], [0.6.0-dev],
+AC_INIT([openocd], [0.7.0-dev],
[OpenOCD Mailing List <openocd-devel@lists.sourceforge.net>])
AC_CONFIG_SRCDIR([src/openocd.c])
-m4_include(config_subdir.m4)dnl
+m4_include([config_subdir.m4])dnl
AM_INIT_AUTOMAKE([-Wall -Wno-portability dist-bzip2 dist-zip])
AM_MAINTAINER_MODE
-AM_CONFIG_HEADER(config.h)
+AM_CONFIG_HEADER([config.h])
AH_BOTTOM([
#include <helper/system.h>
+#include <helper/types.h>
#include <helper/replacements.h>
])
m4_defun([_LT_AC_LANG_GCJ_CONFIG], [:])
AC_DISABLE_SHARED
AC_PROG_LIBTOOL
-AC_SUBST(LIBTOOL_DEPS)
-
+AC_SUBST([LIBTOOL_DEPS])
dnl configure checks required for Jim files (these are obsolete w/ C99)
AC_C_CONST
AC_TYPE_LONG_LONG_INT
-
AC_SEARCH_LIBS([ioperm], [ioperm])
AC_SEARCH_LIBS([dlopen], [dl])
-AC_CHECK_HEADERS(sys/socket.h)
-AC_CHECK_HEADERS(arpa/inet.h, [], [], [dnl
+AC_CHECK_HEADERS([sys/socket.h])
+AC_CHECK_HEADERS([arpa/inet.h], [], [], [dnl
#include <stdio.h>
#ifdef STDC_HEADERS
# include <stdlib.h>
# include <sys/socket.h>
#endif
])
-AC_CHECK_HEADERS(elf.h)
-AC_CHECK_HEADERS(dirent.h)
-AC_CHECK_HEADERS(fcntl.h)
-AC_CHECK_HEADERS(ifaddrs.h, [], [], [dnl
+AC_CHECK_HEADERS([elf.h])
+AC_CHECK_HEADERS([dirent.h])
+AC_CHECK_HEADERS([fcntl.h])
+AC_CHECK_HEADERS([ifaddrs.h], [], [], [dnl
#include <stdio.h>
#ifdef STDC_HEADERS
# include <stdlib.h>
# include <sys/socket.h>
#endif
])
-AC_CHECK_HEADERS(malloc.h)
-AC_CHECK_HEADERS(netdb.h)
+AC_CHECK_HEADERS([malloc.h])
+AC_CHECK_HEADERS([netdb.h])
AC_CHECK_HEADERS([netinet/in.h], [], [], [dnl
#include <stdio.h>
#ifdef STDC_HEADERS
# include <sys/socket.h>
#endif
])
-AC_CHECK_HEADERS(netinet/tcp.h, [], [], [dnl
+AC_CHECK_HEADERS([netinet/tcp.h], [], [], [dnl
#include <stdio.h>
#ifdef STDC_HEADERS
# include <stdlib.h>
# include <sys/socket.h>
#endif
])
-AC_CHECK_HEADERS(pthread.h)
-AC_CHECK_HEADERS(strings.h)
-AC_CHECK_HEADERS(sys/ioctl.h)
-AC_CHECK_HEADERS(sys/param.h)
-AC_CHECK_HEADERS(sys/poll.h)
-AC_CHECK_HEADERS(sys/select.h)
-AC_CHECK_HEADERS(sys/stat.h)
-AC_CHECK_HEADERS(sys/time.h)
-AC_CHECK_HEADERS(sys/types.h)
-AC_CHECK_HEADERS(unistd.h)
+AC_CHECK_HEADERS([pthread.h])
+AC_CHECK_HEADERS([strings.h])
+AC_CHECK_HEADERS([sys/ioctl.h])
+AC_CHECK_HEADERS([sys/param.h])
+AC_CHECK_HEADERS([sys/poll.h])
+AC_CHECK_HEADERS([sys/select.h])
+AC_CHECK_HEADERS([sys/stat.h])
+AC_CHECK_HEADERS([sys/time.h])
+AC_CHECK_HEADERS([sys/types.h])
+AC_CHECK_HEADERS([unistd.h])
AC_CHECK_HEADERS([net/if.h], [], [], [dnl
#include <stdio.h>
#ifdef STDC_HEADERS
AC_C_BIGENDIAN
-AC_CHECK_FUNCS(strndup)
-AC_CHECK_FUNCS(strnlen)
-AC_CHECK_FUNCS(gettimeofday)
-AC_CHECK_FUNCS(usleep)
-AC_CHECK_FUNCS(vasprintf)
+AC_CHECK_FUNCS([strndup])
+AC_CHECK_FUNCS([strnlen])
+AC_CHECK_FUNCS([gettimeofday])
+AC_CHECK_FUNCS([usleep])
+AC_CHECK_FUNCS([vasprintf])
build_bitbang=no
build_bitq=no
else
build_release=yes
fi
-AC_MSG_RESULT($build_release)
+AC_MSG_RESULT([$build_release])
# We are not *ALWAYS* being installed in the standard place.
# We may be installed in a "tool-build" specific location.
# In case (1) and (2) we need to know where the package was unpacked.
AC_ARG_WITH(ftd2xx-win32-zipdir,
- AS_HELP_STRING([--with-ftd2xx-win32-zipdir],[Where (CYGWIN/MINGW) the zip file from ftdichip.com was unpacked <default=search>]),
+ AS_HELP_STRING([--with-ftd2xx-win32-zipdir],[Where (CYGWIN/MINGW) the zip file from ftdichip.com was unpacked (default=search)]),
[
# option present
if test -d $with_ftd2xx_win32_zipdir
], [true])
AC_ARG_WITH(ftd2xx-linux-tardir,
- AS_HELP_STRING([--with-ftd2xx-linux-tardir], [Where (Linux/Unix) the tar file from ftdichip.com was unpacked <default=search>]),
+ AS_HELP_STRING([--with-ftd2xx-linux-tardir], [Where (Linux/Unix) the tar file from ftdichip.com was unpacked (default=search)]),
[
# Option present
if test $is_win32 = yes ; then
AC_ARG_WITH(ftd2xx-lib,
AS_HELP_STRING([--with-ftd2xx-lib],
- [Use static or shared ftd2xx libs on default static]),
+ [Use static or shared ftd2xx libs (default=static)]),
[
case "$withval" in
static)
with_ftd2xx_lib=static
])
-
-AC_ARG_ENABLE(doxygen-html,
+AC_ARG_ENABLE([doxygen-html],
AS_HELP_STRING([--disable-doxygen-html],
[Disable building Doxygen manual as HTML.]),
[doxygen_as_html=$enableval], [doxygen_as_html=yes])
-AC_SUBST(doxygen_as_html)
+AC_SUBST([doxygen_as_html])
AC_MSG_CHECKING([whether to build Doxygen as HTML])
-AC_MSG_RESULT($doxygen_as_html)
+AC_MSG_RESULT([$doxygen_as_html])
-AC_ARG_ENABLE(doxygen-pdf,
+AC_ARG_ENABLE([doxygen-pdf],
AS_HELP_STRING([--enable-doxygen-pdf],
[Enable building Doxygen manual as PDF.]),
[doxygen_as_pdf=$enableval], [doxygen_as_pdf=no])
-AC_SUBST(doxygen_as_pdf)
+AC_SUBST([doxygen_as_pdf])
AC_MSG_CHECKING([whether to build Doxygen as PDF])
-AC_MSG_RESULT($doxygen_as_pdf)
-
+AC_MSG_RESULT([$doxygen_as_pdf])
-AC_ARG_ENABLE(gccwarnings,
+AC_ARG_ENABLE([gccwarnings],
AS_HELP_STRING([--disable-gccwarnings], [Disable compiler warnings]),
[gcc_warnings=$enableval], [gcc_warnings=yes])
-AC_ARG_ENABLE(wextra,
+AC_ARG_ENABLE([wextra],
AS_HELP_STRING([--disable-wextra], [Disable extra compiler warnings]),
[gcc_wextra=$enableval], [gcc_wextra=$gcc_warnings])
-AC_ARG_ENABLE(werror,
+AC_ARG_ENABLE([werror],
AS_HELP_STRING([--disable-werror], [Do not treat warnings as errors]),
[gcc_werror=$enableval], [gcc_werror=$gcc_warnings])
debug_usb_io=no
debug_usb_comms=no
-AC_ARG_ENABLE(verbose,
+AC_ARG_ENABLE([verbose],
AS_HELP_STRING([--enable-verbose],
[Enable verbose JTAG I/O messages (for debugging).]),
[
debug_usb_comms=$enableval
], [])
-AC_ARG_ENABLE(verbose_jtag_io,
+AC_ARG_ENABLE([verbose_jtag_io],
AS_HELP_STRING([--enable-verbose-jtag-io],
[Enable verbose JTAG I/O messages (for debugging).]),
[debug_jtag_io=$enableval], [])
-AC_ARG_ENABLE(verbose_usb_io,
+
+AC_ARG_ENABLE([verbose_usb_io],
AS_HELP_STRING([--enable-verbose-usb-io],
[Enable verbose USB I/O messages (for debugging)]),
[debug_usb_io=$enableval], [])
-AC_ARG_ENABLE(verbose_usb_comms,
+
+AC_ARG_ENABLE([verbose_usb_comms],
AS_HELP_STRING([--enable-verbose-usb-comms],
[Enable verbose USB communication messages (for debugging)]),
[debug_usb_comms=$enableval], [])
AC_MSG_CHECKING([whether to enable verbose JTAG I/O messages]);
-AC_MSG_RESULT($debug_jtag_io)
+AC_MSG_RESULT([$debug_jtag_io])
if test $debug_jtag_io = yes; then
AC_DEFINE([_DEBUG_JTAG_IO_],[1], [Print verbose JTAG I/O messages])
fi
AC_MSG_CHECKING([whether to enable verbose USB I/O messages]);
-AC_MSG_RESULT($debug_usb_io)
+AC_MSG_RESULT([$debug_usb_io])
if test $debug_usb_io = yes; then
AC_DEFINE([_DEBUG_USB_IO_],[1], [Print verbose USB I/O messages])
fi
AC_MSG_CHECKING([whether to enable verbose USB communication messages]);
-AC_MSG_RESULT($debug_usb_comms)
+AC_MSG_RESULT([$debug_usb_comms])
if test $debug_usb_comms = yes; then
AC_DEFINE([_DEBUG_USB_COMMS_],[1], [Print verbose USB communication messages])
fi
-
debug_malloc=no
-AC_ARG_ENABLE(malloc_logging,
+AC_ARG_ENABLE([malloc_logging],
AS_HELP_STRING([--enable-malloc-logging],
[Include free space in logging messages (requires malloc.h).]),
[debug_malloc=$enableval], [])
AC_MSG_CHECKING([whether to enable malloc free space logging]);
-AC_MSG_RESULT($debug_malloc)
+AC_MSG_RESULT([$debug_malloc])
if test $debug_malloc = yes; then
AC_DEFINE([_DEBUG_FREE_SPACE_],[1], [Include malloc free space in logging])
fi
-
-AC_ARG_ENABLE(dummy,
+AC_ARG_ENABLE([dummy],
AS_HELP_STRING([--enable-dummy], [Enable building the dummy port driver]),
[build_dummy=$enableval], [build_dummy=no])
-AC_ARG_ENABLE(parport,
+AC_ARG_ENABLE([parport],
AS_HELP_STRING([--enable-parport], [Enable building the pc parallel port driver]),
[build_parport=$enableval], [build_parport=no])
-AC_ARG_ENABLE(parport_ppdev,
+AC_ARG_ENABLE([parport_ppdev],
AS_HELP_STRING([--disable-parport-ppdev],
[Disable use of ppdev (/dev/parportN) for parport (for x86 only)]),
[parport_use_ppdev=$enableval], [parport_use_ppdev=yes])
-AC_ARG_ENABLE(parport_giveio,
+AC_ARG_ENABLE([parport_giveio],
AS_HELP_STRING([--enable-parport-giveio],
[Enable use of giveio for parport (for CygWin only)]),
[parport_use_giveio=$enableval], [parport_use_giveio=])
-AC_ARG_ENABLE(ft2232_libftdi,
+AC_ARG_ENABLE([ft2232_libftdi],
AS_HELP_STRING([--enable-ft2232_libftdi], [Enable building support for FT2232 based devices using the libftdi driver, opensource alternate of FTD2XX]),
[build_ft2232_libftdi=$enableval], [build_ft2232_libftdi=no])
-AC_ARG_ENABLE(ft2232_ftd2xx,
+AC_ARG_ENABLE([ft2232_ftd2xx],
AS_HELP_STRING([--enable-ft2232_ftd2xx], [Enable building support for FT2232 based devices using the FTD2XX driver from ftdichip.com]),
[build_ft2232_ftd2xx=$enableval], [build_ft2232_ftd2xx=no])
-AC_ARG_ENABLE(usb_blaster_libftdi,
+AC_ARG_ENABLE([ftdi],
+ AS_HELP_STRING([--enable-ftdi], [Enable building support for the MPSSE mode of FTDI based devices, using libusb-1.0 in asynchronous mode]),
+ [build_ftdi=$enableval], [build_ftdi=no])
+
+AC_ARG_ENABLE([usb_blaster_libftdi],
AS_HELP_STRING([--enable-usb_blaster_libftdi], [Enable building support for the Altera USB-Blaster using the libftdi driver, opensource alternate of FTD2XX]),
[build_usb_blaster_libftdi=$enableval], [build_usb_blaster_libftdi=no])
-AC_ARG_ENABLE(usb_blaster_ftd2xx,
+AC_ARG_ENABLE([usb_blaster_ftd2xx],
AS_HELP_STRING([--enable-usb_blaster_ftd2xx], [Enable building support for the Altera USB-Blaster using the FTD2XX driver from ftdichip.com]),
[build_usb_blaster_ftd2xx=$enableval], [build_usb_blaster_ftd2xx=no])
-AC_ARG_ENABLE(amtjtagaccel,
+AC_ARG_ENABLE([amtjtagaccel],
AS_HELP_STRING([--enable-amtjtagaccel], [Enable building the Amontec JTAG-Accelerator driver]),
[build_amtjtagaccel=$enableval], [build_amtjtagaccel=no])
-AC_ARG_ENABLE(ecosboard,
- AS_HELP_STRING([--enable-ecosboard], [Enable building support for eCos based JTAG debugger]),
- [build_ecosboard=$enableval], [build_ecosboard=no])
-
-AC_ARG_ENABLE(zy1000_master,
+AC_ARG_ENABLE([zy1000_master],
AS_HELP_STRING([--enable-zy1000-master], [Use ZY1000 JTAG master registers]),
[build_zy1000_master=$enableval], [build_zy1000_master=no])
-AC_ARG_ENABLE(zy1000,
+AC_ARG_ENABLE([zy1000],
AS_HELP_STRING([--enable-zy1000], [Enable ZY1000 interface]),
[build_zy1000=$enableval], [build_zy1000=no])
-AC_ARG_ENABLE(ioutil,
+AC_ARG_ENABLE([ioutil],
AS_HELP_STRING([--enable-ioutil], [Enable ioutil functions - useful for standalone OpenOCD implementations]),
[build_ioutil=$enableval], [build_ioutil=no])
case "${host_cpu}" in
arm*)
- AC_ARG_ENABLE(ep93xx,
+ AC_ARG_ENABLE([ep93xx],
AS_HELP_STRING([--enable-ep93xx], [Enable building support for EP93xx based SBCs]),
[build_ep93xx=$enableval], [build_ep93xx=no])
- AC_ARG_ENABLE(at91rm9200,
+ AC_ARG_ENABLE([at91rm9200],
AS_HELP_STRING([--enable-at91rm9200], [Enable building support for AT91RM9200 based SBCs]),
[build_at91rm9200=$enableval], [build_at91rm9200=no])
;;
;;
esac
-AC_ARG_ENABLE(gw16012,
+AC_ARG_ENABLE([gw16012],
AS_HELP_STRING([--enable-gw16012], [Enable building support for the Gateworks GW16012 JTAG Programmer]),
[build_gw16012=$enableval], [build_gw16012=no])
-AC_ARG_ENABLE(presto_libftdi,
+AC_ARG_ENABLE([presto_libftdi],
AS_HELP_STRING([--enable-presto_libftdi], [Enable building support for ASIX Presto Programmer using the libftdi driver]),
[build_presto_libftdi=$enableval], [build_presto_libftdi=no])
-AC_ARG_ENABLE(presto_ftd2xx,
+AC_ARG_ENABLE([presto_ftd2xx],
AS_HELP_STRING([--enable-presto_ftd2xx], [Enable building support for ASIX Presto Programmer using the FTD2XX driver]),
[build_presto_ftd2xx=$enableval], [build_presto_ftd2xx=no])
-AC_ARG_ENABLE(usbprog,
+AC_ARG_ENABLE([usbprog],
AS_HELP_STRING([--enable-usbprog], [Enable building support for the usbprog JTAG Programmer]),
[build_usbprog=$enableval], [build_usbprog=no])
-AC_ARG_ENABLE(oocd_trace,
+AC_ARG_ENABLE([oocd_trace],
AS_HELP_STRING([--enable-oocd_trace],
[Enable building support for some prototype OpenOCD+trace ETM capture hardware]),
[build_oocd_trace=$enableval], [build_oocd_trace=no])
-AC_ARG_ENABLE(jlink,
+AC_ARG_ENABLE([jlink],
AS_HELP_STRING([--enable-jlink], [Enable building support for the Segger J-Link JTAG Programmer]),
[build_jlink=$enableval], [build_jlink=no])
-AC_ARG_ENABLE(vsllink,
+AC_ARG_ENABLE([vsllink],
AS_HELP_STRING([--enable-vsllink], [Enable building support for the Versaloon-Link JTAG Programmer]),
[build_vsllink=$enableval], [build_vsllink=no])
-AC_ARG_ENABLE(rlink,
+AC_ARG_ENABLE([rlink],
AS_HELP_STRING([--enable-rlink], [Enable building support for the Raisonance RLink JTAG Programmer]),
[build_rlink=$enableval], [build_rlink=no])
-AC_ARG_ENABLE(ulink,
+AC_ARG_ENABLE([ulink],
AS_HELP_STRING([--enable-ulink], [Enable building support for the Keil ULINK JTAG Programmer]),
[build_ulink=$enableval], [build_ulink=no])
-AC_ARG_ENABLE(arm-jtag-ew,
+AC_ARG_ENABLE([arm-jtag-ew],
AS_HELP_STRING([--enable-arm-jtag-ew], [Enable building support for the Olimex ARM-JTAG-EW Programmer]),
[build_armjtagew=$enableval], [build_armjtagew=no])
-AC_ARG_ENABLE(buspirate,
+AC_ARG_ENABLE([buspirate],
AS_HELP_STRING([--enable-buspirate], [Enable building support for the Buspirate]),
[build_buspirate=$enableval], [build_buspirate=no])
-AC_ARG_ENABLE(minidriver_dummy,
+AC_ARG_ENABLE([stlink],
+ AS_HELP_STRING([--enable-stlink], [Enable building support for the ST-Link JTAG Programmer]),
+ [build_stlink=$enableval], [build_stlink=no])
+
+AC_ARG_ENABLE([osbdm],
+ AS_HELP_STRING([--enable-osbdm], [Enable building support for the OSBDM (JTAG only) Programmer]),
+ [build_osbdm=$enableval], [build_osbdm=no])
+
+AC_ARG_ENABLE([opendous],
+ AS_HELP_STRING([--enable-opendous], [Enable building support for the estick/opendous JTAG Programmer]),
+ [build_opendous=$enableval], [build_opendous=no])
+
+AC_ARG_ENABLE([sysfsgpio],
+ AS_HELP_STRING([--enable-sysfsgpio], [Enable building support for programming driven via sysfs gpios.]),
+ [build_sysfsgpio=$enableval], [build_sysfsgpio=no])
+
+AC_ARG_ENABLE([minidriver_dummy],
AS_HELP_STRING([--enable-minidriver-dummy], [Enable the dummy minidriver.]),
[build_minidriver_dummy=$enableval], [build_minidriver_dummy=no])
-AC_ARG_ENABLE(internal-jimtcl,
+AC_ARG_ENABLE([internal-jimtcl],
AS_HELP_STRING([--disable-internal-jimtcl], [Disable building internal jimtcl]),
[use_internal_jimtcl=$enableval], [use_internal_jimtcl=yes])
-AC_ARG_ENABLE(libusb0,
+AC_ARG_ENABLE([libusb0],
AS_HELP_STRING([--enable-libusb0], [Use libusb-0.1 library for USB JTAG devices]),
[check_libusb0=$enableval], [check_libusb0=no])
if test $build_minidriver = yes; then
AC_MSG_ERROR([Multiple minidriver options have been enabled.])
fi
- AC_DEFINE(HAVE_JTAG_MINIDRIVER_H, 1,
+ AC_DEFINE([HAVE_JTAG_MINIDRIVER_H], [1],
[Define to 1 if you have the <jtag_minidriver.h> header file.])
build_minidriver=yes
fi
-AC_MSG_RESULT($build_zy1000)
+AC_MSG_RESULT([$build_zy1000])
-AC_ARG_ENABLE(remote-bitbang,
+AC_ARG_ENABLE([remote-bitbang],
AS_HELP_STRING([--enable-remote-bitbang], [Enable building support for the Remote Bitbang jtag driver]),
[build_remote_bitbang=$enableval], [build_remote_bitbang=no])
-
AC_MSG_CHECKING([whether to enable dummy minidriver])
if test $build_minidriver_dummy = yes; then
if test $build_minidriver = yes; then
AC_MSG_ERROR([Multiple minidriver options have been enabled.])
fi
build_minidriver=yes
- AC_DEFINE(BUILD_MINIDRIVER_DUMMY, 1, [Use the dummy minidriver.])
- AC_DEFINE(HAVE_JTAG_MINIDRIVER_H, 1,
+ AC_DEFINE([BUILD_MINIDRIVER_DUMMY], [1], [Use the dummy minidriver.])
+ AC_DEFINE([HAVE_JTAG_MINIDRIVER_H], [1],
[Define to 1 if you have the <jtag_minidriver.h> header file.])
fi
-AC_MSG_RESULT($build_minidriver_dummy)
+AC_MSG_RESULT([$build_minidriver_dummy])
AC_MSG_CHECKING([whether standard drivers can be built])
if test "$build_minidriver" = yes; then
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([], [[return __MINGW32__;]])],
[is_mingw=yes],[is_mingw=no])
if test $is_mingw = yes; then
- AC_DEFINE(IS_MINGW, 1, [1 if building for MinGW.])
+ AC_DEFINE([IS_MINGW], [1], [1 if building for MinGW.])
if test x$parport_use_giveio = xno; then
AC_MSG_WARN([--disable-parport-giveio is not supported by MinGW32 hosts])
fi
is_cygwin=no
else
is_cygwin=yes
- AC_DEFINE(IS_CYGWIN, 1, [1 if building for Cygwin.])
+ AC_DEFINE([IS_CYGWIN], [1], [1 if building for Cygwin.])
# sys/io.h needed under cygwin for parport access
if test $build_parport = yes; then
- AC_CHECK_HEADERS(sys/io.h,[],AC_MSG_ERROR([Please install the cygwin ioperm package]))
+ AC_CHECK_HEADERS([sys/io.h],[],AC_MSG_ERROR([Please install the cygwin ioperm package]))
fi
fi
- AC_DEFINE(IS_WIN32, 1, [1 if building for Win32.])
- AC_DEFINE(IS_DARWIN, 0, [0 if not building for Darwin.])
+ AC_DEFINE([IS_WIN32], [1], [1 if building for Win32.])
+ AC_DEFINE([IS_DARWIN], [0], [0 if not building for Darwin.])
;;
*-mingw*)
is_mingw=yes
CFLAGS="$CFLAGS -D__USE_MINGW_ANSI_STDIO"
- AC_DEFINE(IS_MINGW, 1, [1 if building for MinGW.])
- AC_DEFINE(IS_WIN32, 1, [1 if building for Win32.])
- AC_DEFINE(IS_DARWIN, 0, [0 if not building for Darwin.])
+ AC_DEFINE([IS_MINGW], [1], [1 if building for MinGW.])
+ AC_DEFINE([IS_WIN32], [1], [1 if building for Win32.])
+ AC_DEFINE([IS_DARWIN], [0], [0 if not building for Darwin.])
;;
*darwin*)
is_darwin=yes
fi
parport_use_giveio=no
- AC_DEFINE(IS_CYGWIN, 0, [0 if not building for Cygwin.])
- AC_DEFINE(IS_WIN32, 0, [0 if not building for Win32.])
- AC_DEFINE(IS_DARWIN, 1, [1 if building for Darwin.])
+ AC_DEFINE([IS_CYGWIN], [0], [0 if not building for Cygwin.])
+ AC_DEFINE([IS_WIN32], [0], [0 if not building for Win32.])
+ AC_DEFINE([IS_DARWIN], [1], [1 if building for Darwin.])
;;
*)
if test x$parport_use_giveio = xyes; then
AC_MSG_WARN([--enable-parport-giveio cannot be used by ]$host[ hosts])
fi
parport_use_giveio=no
- AC_DEFINE(IS_CYGWIN, 0, [0 if not building for Cygwin.])
- AC_DEFINE(IS_WIN32, 0, [0 if not building for Win32.])
- AC_DEFINE(IS_DARWIN, 0, [0 if not building for Darwin.])
+ AC_DEFINE([IS_CYGWIN], [0], [0 if not building for Cygwin.])
+ AC_DEFINE([IS_WIN32], [0], [0 if not building for Win32.])
+ AC_DEFINE([IS_DARWIN], [0], [0 if not building for Darwin.])
;;
esac
if test $build_parport = yes; then
build_bitbang=yes
- AC_DEFINE(BUILD_PARPORT, 1, [1 if you want parport.])
+ AC_DEFINE([BUILD_PARPORT], [1], [1 if you want parport.])
else
- AC_DEFINE(BUILD_PARPORT, 0, [0 if you don't want parport.])
+ AC_DEFINE([BUILD_PARPORT], [0], [0 if you don't want parport.])
fi
if test $build_dummy = yes; then
build_bitbang=yes
- AC_DEFINE(BUILD_DUMMY, 1, [1 if you want dummy driver.])
+ AC_DEFINE([BUILD_DUMMY], [1], [1 if you want dummy driver.])
else
- AC_DEFINE(BUILD_DUMMY, 0, [0 if you don't want dummy driver.])
+ AC_DEFINE([BUILD_DUMMY], [0], [0 if you don't want dummy driver.])
fi
if test $build_ep93xx = yes; then
build_bitbang=yes
- AC_DEFINE(BUILD_EP93XX, 1, [1 if you want ep93xx.])
-else
- AC_DEFINE(BUILD_EP93XX, 0, [0 if you don't want ep93xx.])
-fi
-
-if test $build_ecosboard = yes; then
- AC_DEFINE(BUILD_ECOSBOARD, 1, [1 if you want eCosBoard.])
+ AC_DEFINE([BUILD_EP93XX], [1], [1 if you want ep93xx.])
else
- AC_DEFINE(BUILD_ECOSBOARD, 0, [0 if you don't want eCosBoard.])
+ AC_DEFINE([BUILD_EP93XX], [0], [0 if you don't want ep93xx.])
fi
if test $build_zy1000 = yes; then
- AC_DEFINE(BUILD_ZY1000, 1, [1 if you want ZY1000.])
+ AC_DEFINE([BUILD_ZY1000], [1], [1 if you want ZY1000.])
else
- AC_DEFINE(BUILD_ZY1000, 0, [0 if you don't want ZY1000.])
+ AC_DEFINE([BUILD_ZY1000], [0], [0 if you don't want ZY1000.])
fi
if test $build_zy1000_master = yes; then
- AC_DEFINE(BUILD_ZY1000_MASTER, 1, [1 if you want ZY1000 JTAG master registers.])
+ AC_DEFINE([BUILD_ZY1000_MASTER], [1], [1 if you want ZY1000 JTAG master registers.])
else
- AC_DEFINE(BUILD_ZY1000_MASTER, 0, [0 if you don't want ZY1000 JTAG master registers.])
+ AC_DEFINE([BUILD_ZY1000_MASTER], [0], [0 if you don't want ZY1000 JTAG master registers.])
fi
if test $build_at91rm9200 = yes; then
build_bitbang=yes
- AC_DEFINE(BUILD_AT91RM9200, 1, [1 if you want at91rm9200.])
+ AC_DEFINE([BUILD_AT91RM9200], [1], [1 if you want at91rm9200.])
else
- AC_DEFINE(BUILD_AT91RM9200, 0, [0 if you don't want at91rm9200.])
+ AC_DEFINE([BUILD_AT91RM9200], [0], [0 if you don't want at91rm9200.])
fi
if test x$parport_use_ppdev = xyes; then
- AC_DEFINE(PARPORT_USE_PPDEV, 1, [1 if you want parport to use ppdev.])
+ AC_DEFINE([PARPORT_USE_PPDEV], [1], [1 if you want parport to use ppdev.])
else
- AC_DEFINE(PARPORT_USE_PPDEV, 0, [0 if you don't want parport to use ppdev.])
+ AC_DEFINE([PARPORT_USE_PPDEV], [0], [0 if you don't want parport to use ppdev.])
fi
if test x$parport_use_giveio = xyes; then
- AC_DEFINE(PARPORT_USE_GIVEIO, 1, [1 if you want parport to use giveio.])
+ AC_DEFINE([PARPORT_USE_GIVEIO], [1], [1 if you want parport to use giveio.])
else
- AC_DEFINE(PARPORT_USE_GIVEIO, 0, [0 if you don't want parport to use giveio.])
+ AC_DEFINE([PARPORT_USE_GIVEIO], [0], [0 if you don't want parport to use giveio.])
fi
if test $build_bitbang = yes; then
- AC_DEFINE(BUILD_BITBANG, 1, [1 if you want a bitbang interface.])
+ AC_DEFINE([BUILD_BITBANG], [1], [1 if you want a bitbang interface.])
else
- AC_DEFINE(BUILD_BITBANG, 0, [0 if you don't want a bitbang interface.])
+ AC_DEFINE([BUILD_BITBANG], [0], [0 if you don't want a bitbang interface.])
fi
if test $build_ft2232_libftdi = yes; then
- AC_DEFINE(BUILD_FT2232_LIBFTDI, 1, [1 if you want libftdi ft2232.])
+ AC_DEFINE([BUILD_FT2232_LIBFTDI], [1], [1 if you want libftdi ft2232.])
else
- AC_DEFINE(BUILD_FT2232_LIBFTDI, 0, [0 if you don't want libftdi ft2232.])
+ AC_DEFINE([BUILD_FT2232_LIBFTDI], [0], [0 if you don't want libftdi ft2232.])
fi
if test $build_ft2232_ftd2xx = yes; then
- AC_DEFINE(BUILD_FT2232_FTD2XX, 1, [1 if you want ftd2xx ft2232.])
+ AC_DEFINE([BUILD_FT2232_FTD2XX], [1], [1 if you want ftd2xx ft2232.])
+else
+ AC_DEFINE([BUILD_FT2232_FTD2XX], [0], [0 if you don't want ftd2xx ft2232.])
+fi
+
+if test $build_ftdi = yes; then
+ AC_DEFINE([BUILD_FTDI], [1], [1 if you want ftdi.])
else
- AC_DEFINE(BUILD_FT2232_FTD2XX, 0, [0 if you don't want ftd2xx ft2232.])
+ AC_DEFINE([BUILD_FTDI], [0], [0 if you don't want ftdi.])
fi
if test $build_usb_blaster_libftdi = yes; then
build_bitbang=yes
- AC_DEFINE(BUILD_USB_BLASTER_LIBFTDI, 1, [1 if you want libftdi usb_blaster.])
+ AC_DEFINE([BUILD_USB_BLASTER_LIBFTDI], [1], [1 if you want libftdi usb_blaster.])
else
- AC_DEFINE(BUILD_USB_BLASTER_LIBFTDI, 0, [0 if you don't want libftdi usb_blaster.])
+ AC_DEFINE([BUILD_USB_BLASTER_LIBFTDI], [0], [0 if you don't want libftdi usb_blaster.])
fi
if test $build_usb_blaster_ftd2xx = yes; then
build_bitbang=yes
- AC_DEFINE(BUILD_USB_BLASTER_FTD2XX, 1, [1 if you want ftd2xx usb_blaster.])
+ AC_DEFINE([BUILD_USB_BLASTER_FTD2XX], [1], [1 if you want ftd2xx usb_blaster.])
else
- AC_DEFINE(BUILD_USB_BLASTER_FTD2XX, 0, [0 if you don't want ftd2xx usb_blaster.])
+ AC_DEFINE([BUILD_USB_BLASTER_FTD2XX], [0], [0 if you don't want ftd2xx usb_blaster.])
fi
if test $build_amtjtagaccel = yes; then
- AC_DEFINE(BUILD_AMTJTAGACCEL, 1, [1 if you want the Amontec JTAG-Accelerator driver.])
+ AC_DEFINE([BUILD_AMTJTAGACCEL], [1], [1 if you want the Amontec JTAG-Accelerator driver.])
else
- AC_DEFINE(BUILD_AMTJTAGACCEL, 0, [0 if you don't want the Amontec JTAG-Accelerator driver.])
+ AC_DEFINE([BUILD_AMTJTAGACCEL], [0], [0 if you don't want the Amontec JTAG-Accelerator driver.])
fi
if test $build_gw16012 = yes; then
- AC_DEFINE(BUILD_GW16012, 1, [1 if you want the Gateworks GW16012 driver.])
+ AC_DEFINE([BUILD_GW16012], [1], [1 if you want the Gateworks GW16012 driver.])
else
- AC_DEFINE(BUILD_GW16012, 0, [0 if you don't want the Gateworks GW16012 driver.])
+ AC_DEFINE([BUILD_GW16012], [0], [0 if you don't want the Gateworks GW16012 driver.])
fi
if test $build_presto_libftdi = yes; then
build_bitq=yes
- AC_DEFINE(BUILD_PRESTO_LIBFTDI, 1, [1 if you want the ASIX PRESTO driver using libftdi.])
+ AC_DEFINE([BUILD_PRESTO_LIBFTDI], [1], [1 if you want the ASIX PRESTO driver using libftdi.])
else
- AC_DEFINE(BUILD_PRESTO_LIBFTDI, 0, [0 if you don't want the ASIX PRESTO driver using libftdi.])
+ AC_DEFINE([BUILD_PRESTO_LIBFTDI], [0], [0 if you don't want the ASIX PRESTO driver using libftdi.])
fi
if test $build_presto_ftd2xx = yes; then
build_bitq=yes
- AC_DEFINE(BUILD_PRESTO_FTD2XX, 1, [1 if you want the ASIX PRESTO driver using FTD2XX.])
+ AC_DEFINE([BUILD_PRESTO_FTD2XX], [1], [1 if you want the ASIX PRESTO driver using FTD2XX.])
else
- AC_DEFINE(BUILD_PRESTO_FTD2XX, 0, [0 if you don't want the ASIX PRESTO driver using FTD2XX.])
+ AC_DEFINE([BUILD_PRESTO_FTD2XX], [0], [0 if you don't want the ASIX PRESTO driver using FTD2XX.])
fi
if test $build_bitq = yes; then
- AC_DEFINE(BUILD_BITQ, 1, [1 if you want a bitq interface.])
+ AC_DEFINE([BUILD_BITQ], [1], [1 if you want a bitq interface.])
else
- AC_DEFINE(BUILD_BITQ, 0, [0 if you don't want a bitq interface.])
+ AC_DEFINE([BUILD_BITQ], [0], [0 if you don't want a bitq interface.])
fi
if test $build_usbprog = yes; then
- AC_DEFINE(BUILD_USBPROG, 1, [1 if you want the usbprog JTAG driver.])
+ AC_DEFINE([BUILD_USBPROG], [1], [1 if you want the usbprog JTAG driver.])
else
- AC_DEFINE(BUILD_USBPROG, 0, [0 if you don't want the usbprog JTAG driver.])
+ AC_DEFINE([BUILD_USBPROG], [0], [0 if you don't want the usbprog JTAG driver.])
fi
if test $build_oocd_trace = yes; then
- AC_DEFINE(BUILD_OOCD_TRACE, 1, [1 if you want the OpenOCD+trace ETM capture driver.])
+ AC_DEFINE([BUILD_OOCD_TRACE], [1], [1 if you want the OpenOCD+trace ETM capture driver.])
else
- AC_DEFINE(BUILD_OOCD_TRACE, 0, [0 if you don't want the OpenOCD+trace ETM capture driver.])
+ AC_DEFINE([BUILD_OOCD_TRACE], [0], [0 if you don't want the OpenOCD+trace ETM capture driver.])
fi
if test $build_jlink = yes; then
- AC_DEFINE(BUILD_JLINK, 1, [1 if you want the J-Link JTAG driver.])
+ AC_DEFINE([BUILD_JLINK], [1], [1 if you want the J-Link JTAG driver.])
else
- AC_DEFINE(BUILD_JLINK, 0, [0 if you don't want the J-Link JTAG driver.])
+ AC_DEFINE([BUILD_JLINK], [0], [0 if you don't want the J-Link JTAG driver.])
fi
if test $build_vsllink = yes; then
- AC_DEFINE(BUILD_VSLLINK, 1, [1 if you want the Versaloon-Link JTAG driver.])
+ AC_DEFINE([BUILD_VSLLINK], [1], [1 if you want the Versaloon-Link JTAG driver.])
else
- AC_DEFINE(BUILD_VSLLINK, 0, [0 if you don't want the Versaloon-Link JTAG driver.])
+ AC_DEFINE([BUILD_VSLLINK], [0], [0 if you don't want the Versaloon-Link JTAG driver.])
fi
if test $build_rlink = yes; then
- AC_DEFINE(BUILD_RLINK, 1, [1 if you want the RLink JTAG driver.])
+ AC_DEFINE([BUILD_RLINK], [1], [1 if you want the RLink JTAG driver.])
else
- AC_DEFINE(BUILD_RLINK, 0, [0 if you don't want the RLink JTAG driver.])
+ AC_DEFINE([BUILD_RLINK], [0], [0 if you don't want the RLink JTAG driver.])
fi
if test $build_ulink = yes; then
- AC_DEFINE(BUILD_ULINK, 1, [1 if you want the ULINK JTAG driver.])
+ AC_DEFINE([BUILD_ULINK], [1], [1 if you want the ULINK JTAG driver.])
else
- AC_DEFINE(BUILD_ULINK, 0, [0 if you don't want the ULINK JTAG driver.])
+ AC_DEFINE([BUILD_ULINK], [0], [0 if you don't want the ULINK JTAG driver.])
fi
if test $build_armjtagew = yes; then
- AC_DEFINE(BUILD_ARMJTAGEW, 1, [1 if you want the ARM-JTAG-EW JTAG driver.])
+ AC_DEFINE([BUILD_ARMJTAGEW], [1], [1 if you want the ARM-JTAG-EW JTAG driver.])
else
- AC_DEFINE(BUILD_ARMJTAGEW, 0, [0 if you don't want the ARM-JTAG-EW JTAG driver.])
+ AC_DEFINE([BUILD_ARMJTAGEW], [0], [0 if you don't want the ARM-JTAG-EW JTAG driver.])
fi
if test $build_buspirate = yes; then
- AC_DEFINE(BUILD_BUSPIRATE, 1, [1 if you want the Buspirate JTAG driver.])
+ AC_DEFINE([BUILD_BUSPIRATE], [1], [1 if you want the Buspirate JTAG driver.])
+else
+ AC_DEFINE([BUILD_BUSPIRATE], [0], [0 if you don't want the Buspirate JTAG driver.])
+fi
+
+if test $build_stlink = yes; then
+ AC_DEFINE([BUILD_STLINK], [1], [1 if you want the ST-Link JTAG driver.])
else
- AC_DEFINE(BUILD_BUSPIRATE, 0, [0 if you don't want the Buspirate JTAG driver.])
+ AC_DEFINE([BUILD_STLINK], [0], [0 if you don't want the ST-Link JTAG driver.])
+fi
+
+if test $build_osbdm = yes; then
+ AC_DEFINE([BUILD_OSBDM], [1], [1 if you want the OSBDM driver.])
+else
+ AC_DEFINE([BUILD_OSBDM], [0], [0 if you don't want the OSBDM driver.])
+fi
+
+if test $build_opendous = yes; then
+ AC_DEFINE([BUILD_OPENDOUS], [1], [1 if you want the estick/opendous JTAG driver.])
+else
+ AC_DEFINE([BUILD_OPENDOUS], [0], [0 if you don't want the estick/opendous JTAG driver.])
fi
if test "$use_internal_jimtcl" = yes; then
if test $build_remote_bitbang = yes; then
build_bitbang=yes
- AC_DEFINE(BUILD_REMOTE_BITBANG, 1, [1 if you want the Remote Bitbang JTAG driver.])
+ AC_DEFINE([BUILD_REMOTE_BITBANG], [1], [1 if you want the Remote Bitbang JTAG driver.])
else
- AC_DEFINE(BUILD_REMOTE_BITBNAG, 0, [0 if you don't want the Remote Bitbang JTAG driver.])
+ AC_DEFINE([BUILD_REMOTE_BITBANG], [0], [0 if you don't want the Remote Bitbang JTAG driver.])
fi
+if test $build_sysfsgpio = yes; then
+ build_bitbang=yes
+ AC_DEFINE([BUILD_SYSFSGPIO], [1], [1 if you want the SysfsGPIO driver.])
+else
+ AC_DEFINE([BUILD_SYSFSGPIO], [0], [0 if you don't want SysfsGPIO driver.])
+fi
#-- Deal with MingW/Cygwin FTD2XX issues
if test $is_win32 = yes; then
AC_MSG_ERROR([The option: with_ftd2xx_linux_tardir is for LINUX only.])
fi
-if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes ; then
+if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes ; then
AC_MSG_CHECKING([for libftd2xx.a (darwin)])
if test ! -f /usr/local/include/ftd2xx.h ; then
AC_MSG_ERROR([The option: --with-ftd2xx-win32-zipdir is for win32 only])
fi
-if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes ; then
+if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes ; then
# Must be linux
if test $host_os != linux-gnu && test $host_os != linux ; then
AC_MSG_ERROR([The (linux) ftd2xx library from FTDICHIP.com is linux only. Try --enable-ft2232-libftdi instead])
fi
fi # linux
-if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes; then
+if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes ; then
# Before we go any further - make sure we can *BUILD* and *RUN*
# a simple app with the "ftd2xx.lib" file - in what ever form we where given
DWORD x = FT_DEVICE_4232H;
]], [])], [
- AC_DEFINE(BUILD_FT2232_HIGHSPEED, [1],
+ AC_DEFINE([BUILD_FT2232_HIGHSPEED], [1],
[Support FT2232H/FT4232HS with FTD2XX or libftdi.])
build_ft2232_highspeed=yes
], [
AC_MSG_WARN([You need a newer FTD2XX driver (version 2.04.16 or later).])
fi
+AC_MSG_CHECKING([for ftd2xx FT232H device support])
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
+#include "confdefs.h"
+#if IS_WIN32
+#include "windows.h"
+#endif
+#include <stdio.h>
+#include <ftd2xx.h>
+
+DWORD x = FT_DEVICE_232H;
+ ]], [])], [
+ AC_DEFINE([HAS_ENUM_FT232H], [1],
+ [Support FT232H with FTD2XX or libftdi.])
+ has_enum_ft232h=yes
+ ], [
+ has_enum_ft232h=no
+ ])
+ AC_MSG_RESULT([$has_enum_ft232h])
+
+ if test $has_enum_ft232h = no; then
+ AC_MSG_WARN([You need a newer FTD2XX driver (version 2.08.12 or later).])
+ fi
+
LDFLAGS=$LDFLAGS_SAVE
CFLAGS=$CFLAGS_SAVE
fi
]], [[
enum ftdi_chip_type x = TYPE_2232H;
]])], [
- AC_DEFINE(BUILD_FT2232_HIGHSPEED, [1],
+ AC_DEFINE([BUILD_FT2232_HIGHSPEED], [1],
[Support FT2232H/FT4232HS with FTD2XX or libftdi.])
build_ft2232_highspeed=yes
], [
AC_MSG_WARN([You need a newer libftdi version (0.16 or later).])
fi
+AC_MSG_CHECKING([for libftdi FT232H device support])
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
+#include <stdio.h>
+#include <ftdi.h>
+ ]], [[
+enum ftdi_chip_type x = TYPE_232H;
+ ]])], [
+ AC_DEFINE([HAS_ENUM_FT232H], [1],
+ [Support FT232H with FTD2XX or libftdi.])
+ has_enum_ft232h=yes
+ ], [
+ has_enum_ft232h=no
+ ])
+ AC_MSG_RESULT([$has_enum_ft232h])
+
+ if test $has_enum_ft232h = no; then
+ AC_MSG_WARN([You need a newer libftdi version (0.20 or later).])
+ fi
+
# Restore the 'unexpanded ldflags'
LDFLAGS=$LDFLAGS_SAVE
CFLAGS=$CFLAGS_SAVE
# Check for libusb1 ported drivers.
build_usb_ng=no
-if test $build_jlink = yes; then
+if test $build_jlink = yes -o $build_stlink = yes -o $build_osbdm = yes -o \
+ $build_opendous = yes -o $build_ftdi = yes
+then
build_usb_ng=yes
fi
use_libusb1=no
if test $build_usb = yes -o $build_usb_ng = yes; then
if test $check_libusb0 = no -a $build_usb_ng = yes; then
- AC_CHECK_HEADERS(libusb-1.0/libusb.h,
+ AC_CHECK_HEADER([libusb-1.0/libusb.h],
[AC_DEFINE(HAVE_LIBUSB1, 1, [Define if you have libusb-1.0]) check_libusb0=no use_libusb1=yes ],
[ check_libusb0=yes use_libusb1=no ])
fi
if test $check_libusb0 = yes -o $build_usb = yes; then
- AC_CHECK_HEADERS(usb.h, [use_libusb0=yes],
+ AC_CHECK_HEADERS([usb.h], [use_libusb0=yes],
[AC_MSG_ERROR([libusb or libusb-1.0 are required to build some OpenOCD driver(s)])])
fi
fi
-AM_CONDITIONAL(RELEASE, test $build_release = yes)
-AM_CONDITIONAL(PARPORT, test $build_parport = yes)
-AM_CONDITIONAL(DUMMY, test $build_dummy = yes)
-AM_CONDITIONAL(GIVEIO, test x$parport_use_giveio = xyes)
-AM_CONDITIONAL(EP93XX, test $build_ep93xx = yes)
-AM_CONDITIONAL(ECOSBOARD, test $build_ecosboard = yes)
-AM_CONDITIONAL(ZY1000, test $build_zy1000 = yes)
-AM_CONDITIONAL(ZY1000_MASTER, test $build_zy1000_master = yes)
-AM_CONDITIONAL(IOUTIL, test $build_ioutil = yes)
-AM_CONDITIONAL(AT91RM9200, test $build_at91rm9200 = yes)
-AM_CONDITIONAL(BITBANG, test $build_bitbang = yes)
-AM_CONDITIONAL(FT2232_LIBFTDI, test $build_ft2232_libftdi = yes)
-AM_CONDITIONAL(FT2232_DRIVER, test $build_ft2232_ftd2xx = yes -o $build_ft2232_libftdi = yes)
-AM_CONDITIONAL(USB_BLASTER_LIBFTDI, test $build_usb_blaster_libftdi = yes)
-AM_CONDITIONAL(USB_BLASTER_DRIVER, test $build_usb_blaster_ftd2xx = yes -o $build_usb_blaster_libftdi = yes)
-AM_CONDITIONAL(AMTJTAGACCEL, test $build_amtjtagaccel = yes)
-AM_CONDITIONAL(GW16012, test $build_gw16012 = yes)
-AM_CONDITIONAL(PRESTO_LIBFTDI, test $build_presto_libftdi = yes)
-AM_CONDITIONAL(PRESTO_DRIVER, test $build_presto_ftd2xx = yes -o $build_presto_libftdi = yes)
-AM_CONDITIONAL(USBPROG, test $build_usbprog = yes)
-AM_CONDITIONAL(OOCD_TRACE, test $build_oocd_trace = yes)
-AM_CONDITIONAL(JLINK, test $build_jlink = yes)
-AM_CONDITIONAL(VSLLINK, test $build_vsllink = yes)
-AM_CONDITIONAL(RLINK, test $build_rlink = yes)
-AM_CONDITIONAL(ULINK, test $build_ulink = yes)
-AM_CONDITIONAL(ARMJTAGEW, test $build_armjtagew = yes)
-AM_CONDITIONAL(REMOTE_BITBANG, test $build_remote_bitbang = yes)
-AM_CONDITIONAL(BUSPIRATE, test $build_buspirate = yes)
-AM_CONDITIONAL(USB, test $build_usb = yes)
-AM_CONDITIONAL(USB_NG, test $build_usb_ng = yes)
-AM_CONDITIONAL(USE_LIBUSB0, test $use_libusb0 = yes)
-AM_CONDITIONAL(USE_LIBUSB1, test $use_libusb1 = yes)
-AM_CONDITIONAL(IS_CYGWIN, test $is_cygwin = yes)
-AM_CONDITIONAL(IS_MINGW, test $is_mingw = yes)
-AM_CONDITIONAL(IS_WIN32, test $is_win32 = yes)
-AM_CONDITIONAL(IS_DARWIN, test $is_darwin = yes)
-AM_CONDITIONAL(BITQ, test $build_bitq = yes)
-
-AM_CONDITIONAL(MINIDRIVER, test $build_minidriver = yes)
-AM_CONDITIONAL(MINIDRIVER_DUMMY, test $build_minidriver_dummy = yes)
-
-AM_CONDITIONAL(INTERNAL_JIMTCL, test $use_internal_jimtcl = yes)
+AM_CONDITIONAL([RELEASE], [test $build_release = yes])
+AM_CONDITIONAL([PARPORT], [test $build_parport = yes])
+AM_CONDITIONAL([DUMMY], [test $build_dummy = yes])
+AM_CONDITIONAL([GIVEIO], [test x$parport_use_giveio = xyes])
+AM_CONDITIONAL([EP93XX], [test $build_ep93xx = yes])
+AM_CONDITIONAL([ZY1000], [test $build_zy1000 = yes])
+AM_CONDITIONAL([ZY1000_MASTER], [test $build_zy1000_master = yes])
+AM_CONDITIONAL([IOUTIL], [test $build_ioutil = yes])
+AM_CONDITIONAL([AT91RM9200], [test $build_at91rm9200 = yes])
+AM_CONDITIONAL([BITBANG], [test $build_bitbang = yes])
+AM_CONDITIONAL([FT2232_LIBFTDI], [test $build_ft2232_libftdi = yes])
+AM_CONDITIONAL([FT2232_DRIVER], [test $build_ft2232_ftd2xx = yes -o $build_ft2232_libftdi = yes])
+AM_CONDITIONAL([FTDI_DRIVER], [test $build_ftdi = yes])
+AM_CONDITIONAL([USB_BLASTER_LIBFTDI], [test $build_usb_blaster_libftdi = yes])
+AM_CONDITIONAL([USB_BLASTER_DRIVER], [test $build_usb_blaster_ftd2xx = yes -o $build_usb_blaster_libftdi = yes])
+AM_CONDITIONAL([AMTJTAGACCEL], [test $build_amtjtagaccel = yes])
+AM_CONDITIONAL([GW16012], [test $build_gw16012 = yes])
+AM_CONDITIONAL([PRESTO_LIBFTDI], [test $build_presto_libftdi = yes])
+AM_CONDITIONAL([PRESTO_DRIVER], [test $build_presto_ftd2xx = yes -o $build_presto_libftdi = yes])
+AM_CONDITIONAL([USBPROG], [test $build_usbprog = yes])
+AM_CONDITIONAL([OOCD_TRACE], [test $build_oocd_trace = yes])
+AM_CONDITIONAL([JLINK], [test $build_jlink = yes])
+AM_CONDITIONAL([VSLLINK], [test $build_vsllink = yes])
+AM_CONDITIONAL([RLINK], [test $build_rlink = yes])
+AM_CONDITIONAL([ULINK], [test $build_ulink = yes])
+AM_CONDITIONAL([ARMJTAGEW], [test $build_armjtagew = yes])
+AM_CONDITIONAL([REMOTE_BITBANG], [test $build_remote_bitbang = yes])
+AM_CONDITIONAL([BUSPIRATE], [test $build_buspirate = yes])
+AM_CONDITIONAL([STLINK], [test $build_stlink = yes])
+AM_CONDITIONAL([OSBDM], [test $build_osbdm = yes])
+AM_CONDITIONAL([OPENDOUS], [test $build_opendous = yes])
+AM_CONDITIONAL([SYSFSGPIO], [test $build_sysfsgpio = yes])
+AM_CONDITIONAL([USB], [test $build_usb = yes])
+AM_CONDITIONAL([USB_NG], [test $build_usb_ng = yes])
+AM_CONDITIONAL([USE_LIBUSB0], [test $use_libusb0 = yes])
+AM_CONDITIONAL([USE_LIBUSB1], [test $use_libusb1 = yes])
+AM_CONDITIONAL([IS_CYGWIN], [test $is_cygwin = yes])
+AM_CONDITIONAL([IS_MINGW], [test $is_mingw = ye]s)
+AM_CONDITIONAL([IS_WIN32], [test $is_win32 = ye]s)
+AM_CONDITIONAL([IS_DARWIN], [test $is_darwin = ye]s)
+AM_CONDITIONAL([BITQ], [test $build_bitq = yes])
+
+AM_CONDITIONAL([MINIDRIVER], [test $build_minidriver = ye]s)
+AM_CONDITIONAL([MINIDRIVER_DUMMY], [test $build_minidriver_dummy = yes])
+
+AM_CONDITIONAL([INTERNAL_JIMTCL], [test $use_internal_jimtcl = yes])
# Look for environ alternatives. Possibility #1: is environ in unistd.h or stdlib.h?
AC_MSG_CHECKING([for environ in unistd.h and stdlib.h])
fi
AC_MSG_RESULT([$CC_FOR_BUILD])
-AC_SUBST(CC_FOR_BUILD)
-AC_SUBST(CFLAGS_FOR_BUILD)
+AC_SUBST([CC_FOR_BUILD])
+AC_SUBST([CFLAGS_FOR_BUILD])
AC_MSG_CHECKING([for suffix of executable build tools])
if test $cross_compiling = yes; then
EXEEXT_FOR_BUILD=$EXEEXT
fi
AC_MSG_RESULT([$EXEEXT_FOR_BUILD])
-AC_SUBST(EXEEXT_FOR_BUILD)
-
-AC_OUTPUT(dnl
- Makefile dnl
- src/Makefile dnl
- src/helper/Makefile dnl
- src/jtag/Makefile dnl
- src/jtag/drivers/Makefile dnl
- src/transport/Makefile dnl
- src/xsvf/Makefile dnl
- src/svf/Makefile dnl
- src/target/Makefile dnl
- src/rtos/Makefile dnl
- src/server/Makefile dnl
- src/flash/Makefile dnl
- src/flash/nor/Makefile dnl
- src/flash/nand/Makefile dnl
- src/pld/Makefile dnl
- doc/Makefile dnl
- )
+AC_SUBST([EXEEXT_FOR_BUILD])
+
+AC_CONFIG_FILES([
+ Makefile
+ src/Makefile
+ src/helper/Makefile
+ src/jtag/Makefile
+ src/jtag/drivers/Makefile
+ src/jtag/stlink/Makefile
+ src/transport/Makefile
+ src/xsvf/Makefile
+ src/svf/Makefile
+ src/target/Makefile
+ src/rtos/Makefile
+ src/server/Makefile
+ src/flash/Makefile
+ src/flash/nor/Makefile
+ src/flash/nand/Makefile
+ src/pld/Makefile
+ doc/Makefile
+])
+AC_OUTPUT
projects / fw / openocd / blobdiff