+This file includes highlights of the changes made in the OpenOCD
+source archive release.
+
+JTAG Layer:
+ * add default to adapter speed when unspecified (100 kHz)
+ * AM335X gpio (BeagleBones) adapter driver
+ * BCM2835 support for SWD
+ * Cadence Virtual Debug (vdebug) adapter driver
+ * CMSIS-DAP support for SWO and SWD multidrop
+ * Espressif USB JTAG Programmer adapter driver
+ * Remote bitbang support for Windows host
+ * ST-LINK add TCP server support to adapter driver
+ * SWD multidrop support
+
+Boundary Scan:
+
+Target Layer:
+ * aarch64: support watchpoints
+ * arm: support independent TPIU and SWO for trace
+ * arm adi v5: support Large Physical Address Extension
+ * arm adi v6: support added, for jtag and swd transport
+ * cortex_a: support watchpoints
+ * elf 64bit load support
+ * Espressif: support ESP32, ESP32-S2 and ESP32-S3 cores
+ * semihosting: support user defined operations
+ * Xtensa: support Xtensa LX architecture via JTAG and ADIv5 DAP
+
+Flash Layer:
+ * Atmel/Microchip SAM E51G18A, E51G19A, R35J18B, LAN9255 support
+ * GigaDevice GD32E23x, GD32F1x0/3x0, GD32VF103 support
+ * Nuvoton NPCX series support
+ * onsemi RSL10 support
+ * Raspberry Pi Pico RP2040 support
+ * ST BlueNRG-LPS support
+ * ST STM32 G05x, G06x, G0Bx, G0Cx, U57x, U58x, WB1x, WL5x support
+ * ST STM32 G0, G4, L4, L4+, L5, WB, WL OTP support
+
+Board, Target, and Interface Configuration Scripts:
+ * Ampere Computing eMAG8180, Altra ("Quicksilver") and Altra Max ("Mystique") board config
+ * Cadence KC705 FPGA (Xtensa Development Platform) via JTAG and ADIv5 DAP board config
+ * Digilent Nexys Video board config
+ * Espressif ESP32 ETHERNET-KIT and WROVER-KIT board config
+ * Espressif ESP32 via ESP USB Bridge generic board config
+ * Espressif ESP32-S2 Kaluga 1 board config
+ * Espressif ESP32-S2 with ESP USB Bridge board config
+ * Espressif ESP32-S3 example board config
+ * Kontron SMARC-sAL28 board config
+ * LambdaConcept ECPIX-5 board config
+ * Microchip ATSAMA5D27-SOM1-EK1 board config
+ * Microchip EVB-LAN9255 board config
+ * Microchip SAME51 Curiosity Nano board config
+ * NXP FRDM-K64F, LS1046ARDB and LS1088ARDB board config
+ * NXP RT6XX board config
+ * Olimex H405 board config
+ * Radiona ULX3S board config
+ * Raspberry Pi 3 and Raspberry Pi 4 model B board config
+ * Raspberry Pi Pico-Debug board config
+ * Renesas R-Car V3U Falcon board config
+ * ST BlueNRG-LPS steval-idb012v1 board config
+ * ST NUCLEO-8S208RB board config
+ * ST NUCLEO-G031K8, NUCLEO-G070RB, NUCLEO-G071RB board config
+ * ST NUCLEO-G431KB, NUCLEO-G431RB, NUCLEO-G474RE board config
+ * ST STM32MP13x-DK board config
+ * TI AM625 EVM, AM642 EVM and AM654 EVM board config
+ * TI J721E EVM, J721S2 EVM and J7200 EVM board config
+ * Ampere Computing eMAG, Altra ("Quicksilver") and Altra Max ("Mystique") target config
+ * Cadence Xtensa generic and Xtensa VDebug target config
+ * Broadcom BCM2711, BCM2835, BCM2836 and BCM2837 target config
+ * Espressif ESP32, ESP32-S2 and ESP32-S3 target config
+ * Microchip ATSAMA5D2 series target config
+ * NanoXplore NG-Ultra SoC target config
+ * NXP IMX8QM target config
+ * NXP LS1028A, LS1046A and LS1088A target config
+ * NXP RT600 (Xtensa HiFi DSP) target config
+ * onsemi RSL10 target config
+ * Raspberry Pi Pico RP2040 target config
+ * Renesas R8A779A0 V3U target config
+ * Renesas RZ/Five target config
+ * Renesas RZ/G2 MPU family target config
+ * Rockchip RK3399 target config
+ * ST BlueNRG-LPS target config
+ * ST STM32MP13x target config
+ * TI AM625, AM654, J721E and J721S2 target config
+ * Ashling Opella-LD interface config
+ * Aspeed AST2600 linuxgpiod based interface config
+ * Blinkinlabs JTAG_Hat interface config
+ * Cadence Virtual Debug (vdebug) interface config
+ * Espressif ESP32-S2 Kaluga 1 board's interface config
+ * Espressif USB Bridge jtag interface config
+ * Infineon DAP miniWiggler V3 interface config
+ * PLS SPC5 interface config
+ * Tigard interface config
+ * Lattice MachXO3 family FPGA config
+
+Server Layer:
+ * GDB: add per-target remote protocol extensions
+ * GDB: more 'Z' packets support
+ * IPDBG JtagHost server functionality
+ * semihosting: I/O redirection to TCP server
+ * telnet: support for command's autocomplete
+
+RTOS:
+ * 'none' rtos support
+ * Zephyr rtos support
+
+Documentation:
+
+Build and Release:
+ * Add json extension to jimtcl build
+ * Drop dependency from libusb0
+ * Drop repository repo.or.cz for submodules
+ * Move gerrit to https://review.openocd.org/
+ * Require autoconf 2.69 or newer
+ * Update jep106 to revision JEP106BE
+ * Update jimtcl to version 0.81
+ * Update libjaylink to version 0.3.1
+ * New configure flag '--enable-jimtcl-maintainer' for jimtcl build
+
+
+This release also contains a number of other important functional and
+cosmetic bugfixes. For more details about what has changed since the
+last release, see the git repository history:
+
+http://sourceforge.net/p/openocd/code/ci/v0.12.0-rc1/log/?path=
+
+
+For older NEWS, see the NEWS files associated with each release
+(i.e. NEWS-<version>).
+
+For more information about contributing test reports, bug fixes, or new
+features and device support, please read the new Developer Manual (or
+the BUGS and PATCHES.txt files in the source archive).
projects / fw / openocd / blobdiff