source archive release.
JTAG Layer:
- * SWD support with FTDI, Versaloon, J-Link, sysfsgpio
- * CMSIS-DAP massive speed and stability improvements
- * Versaloon driver ported to libusb-1.0
- * STLink can reestablish communication with a target that was
- disconnected or rebooted
- * STLink FAULT and WAIT SWD handling improved
- * New hla_serial command to distinguish between several HLA
- adapters attached to a single machine
- * Serial number support for CMSIS-DAP and J-Link adapters
- * Support for more J-Link adapters
- * TAP autoprobing improvements
- * Big speedup for SVF playback with USB Blaster
+ * add default to adapter speed when unspecified (100 kHz)
+ * AM335X gpio (BeagleBones) adapter driver
+ * BCM2835 support for SWD
+ * Cadence Virtual Debug (vdebug) adapter driver
+ * CMSIS-DAP support for SWO and SWD multidrop
+ * Espressif USB JTAG Programmer adapter driver
+ * Remote bitbang support for Windows host
+ * ST-LINK add TCP server support to adapter driver
+ * SWD multidrop support
Boundary Scan:
Target Layer:
- * Stability improvements for targets that get disconnected or
- rebooted during a debug session
- * MIPS speed and reliability improvements
- * MIPS 1.5/2.0 fixes
- * ARMv7-R improvements
- * Cortex-A improvements, A7, A15 MPCores support
- * FPU support for ARMv7-M (Cortex-M4F)
- * TPIU/ITM support (including SWO/SWV tracing), can be
- captured with external tools or STLink
- * JTAG Serial Port (Advanced Debug System softcore) support
- * Profiling support for OpenRISC
- * ChibiOS/RT 3.0 support (with and without FPU)
- * FreeRTOS current versions support
- * Freescale MQX RTOS support
- * GDB target description support for MIPS
- * The last created target is auto-selected as the current
+ * aarch64: support watchpoints
+ * arm: support independent TPIU and SWO for trace
+ * arm adi v5: support Large Physical Address Extension
+ * arm adi v6: support added, for jtag and swd transport
+ * cortex_a: support watchpoints
+ * elf 64bit load support
+ * Espressif: support ESP32, ESP32-S2 and ESP32-S3 cores
+ * semihosting: support user defined operations
+ * Xtensa: support Xtensa LX architecture via JTAG and ADIv5 DAP
Flash Layer:
- * nRF51 async loader to improve flashing performance and stability
- * Cypress PSoC 41xx/42xx family flash driver
- * Silabs SiM3 family flash driver
- * Marvell Wireless Microcontroller SPI flash driver
- * Kinetis mass erase (part unsecuring) implemented
- * lpcspifi stability fixes
- * STM32 family sync with reference manuals, L0 support, bugfixes
- * LPC2000 driver automatically determines part and flash size
- * NXP LPC11(x)xx, LPC13xx, LPC15xx, LPC8xx, LPC5410x, LPC407x support
- * Atmel SAMD, SAMR, SAML21 devices support
- * Atmel SAM4E16 support
- * ZeroGecko family support
- * TI Tiva C Blizzard and Snowflake families support
- * Nuvoton NuMicro M051 support
+ * Atmel/Microchip SAM E51G18A, E51G19A, R35J18B, LAN9255 support
+ * GigaDevice GD32E23x, GD32F1x0/3x0, GD32VF103 support
+ * Nuvoton NPCX series support
+ * onsemi RSL10 support
+ * Raspberry Pi Pico RP2040 support
+ * ST BlueNRG-LPS support
+ * ST STM32 G05x, G06x, G0Bx, G0Cx, U57x, U58x, WB1x, WL5x support
+ * ST STM32 G0, G4, L4, L4+, L5, WB, WL OTP support
Board, Target, and Interface Configuration Scripts:
- * Normal target configs can work with HLA (STLink, ICDI) adapters
- * STM32 discovery and Nucleo boards configs
- * Gumstix AeroCore board config
- * General Plus GP326XXXA target config
- * Micrel KS869x target config
- * ASUS RT-N66U board config
- * Atmel SAM4E-EK board config
- * Atmel AT91SAM4L proper reset handling implemented
- * TI OMAP/AM 3505, 3517 target configs
- * nRF51822-mKIT board config
- * RC Module К1879ХБ1Я target config
- * TI TMDX570LS20SUSB board config
- * TI TMS570 USB Kit board config
- * TI CC2538, CC26xx target configs
- * TI AM437x major config improvements, DDR support
- * TI AM437X IDK board config
- * TI SimpleLink Wi-Fi CC3200 LaunchPad configs
- * Silicon Labs EM357, EM358 target configs
- * Infineon XMC1000, XMC4000 family targets and boards configs
- * Atheros AR9331 target config
- * TP-LINK TL-MR3020 board config
- * Alphascale asm9260t target and eval kit configs
- * Olimex SAM7-LA2 (AT91SAM7A2) board config
- * EFM32 Gecko boards configs
- * Spansion FM4 target and SK-FM4-176L-S6E2CC board configs
- * LPC1xxx target configs were restructured
- * IoT-LAB debug adapter config
- * DP BusBlaster KT-Link compatible config
+ * Ampere Computing eMAG8180, Altra ("Quicksilver") and Altra Max ("Mystique") board config
+ * Cadence KC705 FPGA (Xtensa Development Platform) via JTAG and ADIv5 DAP board config
+ * Digilent Nexys Video board config
+ * Espressif ESP32 ETHERNET-KIT and WROVER-KIT board config
+ * Espressif ESP32 via ESP USB Bridge generic board config
+ * Espressif ESP32-S2 Kaluga 1 board config
+ * Espressif ESP32-S2 with ESP USB Bridge board config
+ * Espressif ESP32-S3 example board config
+ * Kontron SMARC-sAL28 board config
+ * LambdaConcept ECPIX-5 board config
+ * Microchip ATSAMA5D27-SOM1-EK1 board config
+ * Microchip EVB-LAN9255 board config
+ * Microchip SAME51 Curiosity Nano board config
+ * NXP FRDM-K64F, LS1046ARDB and LS1088ARDB board config
+ * NXP RT6XX board config
+ * Olimex H405 board config
+ * Radiona ULX3S board config
+ * Raspberry Pi 3 and Raspberry Pi 4 model B board config
+ * Raspberry Pi Pico-Debug board config
+ * Renesas R-Car V3U Falcon board config
+ * ST BlueNRG-LPS steval-idb012v1 board config
+ * ST NUCLEO-8S208RB board config
+ * ST NUCLEO-G031K8, NUCLEO-G070RB, NUCLEO-G071RB board config
+ * ST NUCLEO-G431KB, NUCLEO-G431RB, NUCLEO-G474RE board config
+ * ST STM32MP13x-DK board config
+ * TI AM625 EVM, AM642 EVM and AM654 EVM board config
+ * TI J721E EVM, J721S2 EVM and J7200 EVM board config
+ * Ampere Computing eMAG, Altra ("Quicksilver") and Altra Max ("Mystique") target config
+ * Cadence Xtensa generic and Xtensa VDebug target config
+ * Broadcom BCM2711, BCM2835, BCM2836 and BCM2837 target config
+ * Espressif ESP32, ESP32-S2 and ESP32-S3 target config
+ * Microchip ATSAMA5D2 series target config
+ * NanoXplore NG-Ultra SoC target config
+ * NXP IMX8QM target config
+ * NXP LS1028A, LS1046A and LS1088A target config
+ * NXP RT600 (Xtensa HiFi DSP) target config
+ * onsemi RSL10 target config
+ * Raspberry Pi Pico RP2040 target config
+ * Renesas R8A779A0 V3U target config
+ * Renesas RZ/Five target config
+ * Renesas RZ/G2 MPU family target config
+ * Rockchip RK3399 target config
+ * ST BlueNRG-LPS target config
+ * ST STM32MP13x target config
+ * TI AM625, AM654, J721E and J721S2 target config
+ * Ashling Opella-LD interface config
+ * Aspeed AST2600 linuxgpiod based interface config
+ * Blinkinlabs JTAG_Hat interface config
+ * Cadence Virtual Debug (vdebug) interface config
+ * Espressif ESP32-S2 Kaluga 1 board's interface config
+ * Espressif USB Bridge jtag interface config
+ * Infineon DAP miniWiggler V3 interface config
+ * PLS SPC5 interface config
+ * Tigard interface config
+ * Lattice MachXO3 family FPGA config
Server Layer:
- * Polling period can be configured
- * "shutdown" command has an immediate effect
- * The "program" command doesn't lead to a shutdown by
- default, use optional "exit" parameter for the old behaviour
- * Proper OS signal handling was implemented
- * Async target notifications for the Tcl RPC
+ * GDB: add per-target remote protocol extensions
+ * GDB: more 'Z' packets support
+ * IPDBG JtagHost server functionality
+ * semihosting: I/O redirection to TCP server
+ * telnet: support for command's autocomplete
+
+RTOS:
+ * 'none' rtos support
+ * Zephyr rtos support
Documentation:
Build and Release:
+ * Add json extension to jimtcl build
+ * Drop dependency from libusb0
+ * Drop repository repo.or.cz for submodules
+ * Move gerrit to https://review.openocd.org/
+ * Require autoconf 2.69 or newer
+ * Update jep106 to revision JEP106BE
+ * Update jimtcl to version 0.81
+ * Update libjaylink to version 0.3.1
+ * New configure flag '--enable-jimtcl-maintainer' for jimtcl build
This release also contains a number of other important functional and
cosmetic bugfixes. For more details about what has changed since the
last release, see the git repository history:
-http://sourceforge.net/p/openocd/code/ci/v0.9.0-rc1/log/?path=
+http://sourceforge.net/p/openocd/code/ci/v0.12.0-rc1/log/?path=
For older NEWS, see the NEWS files associated with each release
projects / fw / openocd / blobdiff