source archive release.
JTAG Layer:
- * New CMSIS-DAP driver
- * Andes AICE debug adapter support
- * New OpenJTAG driver
- * New BCM2835 (RaspberryPi) driver
- * JTAG VPI client driver (for OpenRISC Reference Platform SoC)
- * Xilinx BSCAN_* for OpenRISC support
- * ST-LINKv2-1 support
- * ST-LINKv2 SWO tracing support (UART emulation)
- * JLink-OB (onboard) support
- * Altera USB Blaster driver rewrite, initial Blaster II
- support
- * ULINK driver ported to libusb-1.0, OpenULINK build fixes
- * Support up to 64 bit IR lengths
- * SVF playback (FPGA programming) fixes
- * "ftdi" interface driver got extensive testing and is now
- recommended over the old ft2232 implementation
+ * add default to adapter speed when unspecified (100 kHz)
+ * AM335X gpio (BeagleBones) adapter driver
+ * BCM2835 support for SWD
+ * Cadence Virtual Debug (vdebug) adapter driver
+ * CMSIS-DAP support for SWO and SWD multidrop
+ * Espressif USB JTAG Programmer adapter driver
+ * Remote bitbang support for Windows host
+ * ST-LINK add TCP server support to adapter driver
+ * SWD multidrop support
Boundary Scan:
Target Layer:
- * New target: Andes nds32
- * New target: OpenRISC OR1K
- * New target: Intel Quark X10xx
- * MIPS EJTAG 1.5/2.0 support
- * MIPS speed improvements
- * Cortex-M, Cortex-A (MEM-AP, APB-AP) targets working with BE
- hosts now
- * XScale vector_catch support, reset fixes
- * dsp563xx ad-hoc breakpoint/watchpoint support
- * RTOS support for embKernel
- * Target profiling improvements
- * Memory access functions testbench
+ * aarch64: support watchpoints
+ * arm: support independent TPIU and SWO for trace
+ * arm adi v5: support Large Physical Address Extension
+ * arm adi v6: support added, for jtag and swd transport
+ * cortex_a: support watchpoints
+ * elf 64bit load support
+ * Espressif: support ESP32, ESP32-S2 and ESP32-S3 cores
+ * semihosting: support user defined operations
+ * Xtensa: support Xtensa LX architecture via JTAG and ADIv5 DAP
Flash Layer:
- * STM32 family sync with reference manuals, other bugfixes
- * STM32F401, STM32F07x support
- * Atmel SAM4L, SAMG5x support
- * at91sam3sd8{a,b}, at91sam3s8{a,b,c}, at91sam4s,
- at91sam3n0{a,b,0a,0b} support, bugfixes
- * Atmel SAMD support
- * Milandr 1986ВЕ* support
- * Kinetis KL, K21 support
- * Nuvoton NuMicro MINI5{1,2,4} support
- * Nuvoton NUC910 series support
- * NXP LPC43xx, LPC2000 fixes
- * NXP LPC800, LPC810 support
- * More ATmega parts supported
- * Fujitsu MB9Ax family support
- * EFM32 Wonder Gecko family support
- * Nordic nRF51 support
+ * Atmel/Microchip SAM E51G18A, E51G19A, R35J18B, LAN9255 support
+ * GigaDevice GD32E23x, GD32F1x0/3x0, GD32VF103 support
+ * Nuvoton NPCX series support
+ * onsemi RSL10 support
+ * Raspberry Pi Pico RP2040 support
+ * ST BlueNRG-LPS support
+ * ST STM32 G05x, G06x, G0Bx, G0Cx, U57x, U58x, WB1x, WL5x support
+ * ST STM32 G0, G4, L4, L4+, L5, WB, WL OTP support
Board, Target, and Interface Configuration Scripts:
- * STM32W108xx generic target config
- * STM32F429 discovery board config
- * STM32 Nucleo boards configs
- * DENX M53EVK board config
- * Altera Cyclone V SoC, SoCkit config
- * New TI Launchpads board configs
- * TI am43xx devices, AM437x GP EVM, AM438x ePOS EVM board
- configs
- * Marvell Armada 370 family initial support
- * TI TMDX570LS31USB (TMS570, Cortex-R4) support scripts
- * Freescale FRDM-KL25Z, KL46Z board configs
- * Digilent Zedboard config
- * Asus RT-N16, Linksys WRT54GL, BT HomeHub board configs
- * Atmel Xplained initial support
- * Broadcom bcm28155_ap board config
- * TUMPA, TUMPA Lite interface configs
- * Digilent JTAG-SMT2 interface config
- * New RAM testing functions
- * Easy-to-use firmware recovery helpers targetting ordinary
- users with common equipment
+ * Ampere Computing eMAG8180, Altra ("Quicksilver") and Altra Max ("Mystique") board config
+ * Cadence KC705 FPGA (Xtensa Development Platform) via JTAG and ADIv5 DAP board config
+ * Digilent Nexys Video board config
+ * Espressif ESP32 ETHERNET-KIT and WROVER-KIT board config
+ * Espressif ESP32 via ESP USB Bridge generic board config
+ * Espressif ESP32-S2 Kaluga 1 board config
+ * Espressif ESP32-S2 with ESP USB Bridge board config
+ * Espressif ESP32-S3 example board config
+ * Kontron SMARC-sAL28 board config
+ * LambdaConcept ECPIX-5 board config
+ * Microchip ATSAMA5D27-SOM1-EK1 board config
+ * Microchip EVB-LAN9255 board config
+ * Microchip SAME51 Curiosity Nano board config
+ * NXP FRDM-K64F, LS1046ARDB and LS1088ARDB board config
+ * NXP RT6XX board config
+ * Olimex H405 board config
+ * Radiona ULX3S board config
+ * Raspberry Pi 3 and Raspberry Pi 4 model B board config
+ * Raspberry Pi Pico-Debug board config
+ * Renesas R-Car V3U Falcon board config
+ * ST BlueNRG-LPS steval-idb012v1 board config
+ * ST NUCLEO-8S208RB board config
+ * ST NUCLEO-G031K8, NUCLEO-G070RB, NUCLEO-G071RB board config
+ * ST NUCLEO-G431KB, NUCLEO-G431RB, NUCLEO-G474RE board config
+ * ST STM32MP13x-DK board config
+ * TI AM625 EVM, AM642 EVM and AM654 EVM board config
+ * TI J721E EVM, J721S2 EVM and J7200 EVM board config
+ * Ampere Computing eMAG, Altra ("Quicksilver") and Altra Max ("Mystique") target config
+ * Cadence Xtensa generic and Xtensa VDebug target config
+ * Broadcom BCM2711, BCM2835, BCM2836 and BCM2837 target config
+ * Espressif ESP32, ESP32-S2 and ESP32-S3 target config
+ * Microchip ATSAMA5D2 series target config
+ * NanoXplore NG-Ultra SoC target config
+ * NXP IMX8QM target config
+ * NXP LS1028A, LS1046A and LS1088A target config
+ * NXP RT600 (Xtensa HiFi DSP) target config
+ * onsemi RSL10 target config
+ * Raspberry Pi Pico RP2040 target config
+ * Renesas R8A779A0 V3U target config
+ * Renesas RZ/Five target config
+ * Renesas RZ/G2 MPU family target config
+ * Rockchip RK3399 target config
+ * ST BlueNRG-LPS target config
+ * ST STM32MP13x target config
+ * TI AM625, AM654, J721E and J721S2 target config
+ * Ashling Opella-LD interface config
+ * Aspeed AST2600 linuxgpiod based interface config
+ * Blinkinlabs JTAG_Hat interface config
+ * Cadence Virtual Debug (vdebug) interface config
+ * Espressif ESP32-S2 Kaluga 1 board's interface config
+ * Espressif USB Bridge jtag interface config
+ * Infineon DAP miniWiggler V3 interface config
+ * PLS SPC5 interface config
+ * Tigard interface config
+ * Lattice MachXO3 family FPGA config
Server Layer:
- * Auto-generation of GDB target description for ARMv7-M,
- ARM4, nds32, OR1K, Quark
- * GDB File-I/O Remote Protocol extension support
- * Default GDB flashing events handlers to initialise and reset
- the target automatically when "load" is used
+ * GDB: add per-target remote protocol extensions
+ * GDB: more 'Z' packets support
+ * IPDBG JtagHost server functionality
+ * semihosting: I/O redirection to TCP server
+ * telnet: support for command's autocomplete
+
+RTOS:
+ * 'none' rtos support
+ * Zephyr rtos support
Documentation:
- * Extensive README* changes
- * The official User's Guide was proofread
- * Example cross-build script
- * RTOS documentation improvements
- * Tcl RPC documentation and examples added
Build and Release:
- * *BSD, OS X, clang, ARM, windows build fixes
- * New pkg-config support changes the way libusb (and other
- dependencies) are handled. Many adapter drivers are now
- selected automatically during the configure stage.
+ * Add json extension to jimtcl build
+ * Drop dependency from libusb0
+ * Drop repository repo.or.cz for submodules
+ * Move gerrit to https://review.openocd.org/
+ * Require autoconf 2.69 or newer
+ * Update jep106 to revision JEP106BE
+ * Update jimtcl to version 0.81
+ * Update libjaylink to version 0.3.1
+ * New configure flag '--enable-jimtcl-maintainer' for jimtcl build
This release also contains a number of other important functional and
cosmetic bugfixes. For more details about what has changed since the
last release, see the git repository history:
-http://sourceforge.net/p/openocd/code/ci/v0.8.0/log/?path=
+http://sourceforge.net/p/openocd/code/ci/v0.12.0-rc1/log/?path=
For older NEWS, see the NEWS files associated with each release
projects / fw / openocd / blobdiff