#daemon configuration
telnet_port 4444
gdb_port 3333
#interface
interface ft2232
ft2232_device_desc "Olimex OpenOCD JTAG"
ft2232_layout "olimex-jtag"
ft2232_vid_pid 0x15BA 0x0003
jtag_speed 3
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst separate
#reset_config trst_and_srst srst_pulls_trst
#jtag scan chain
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag_device 4 0x1 0xf 0xe
#target configuration
daemon_startup reset
#target <type> <startup mode>
#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
target arm7tdmi little run_and_init 0 arm7tdmi-s_r4
run_and_halt_time 0 30
#target_script 0 reset oocd_flash_lpc2148.script
working_area 0 0x40000000 0x40000 nobackup
#flash configuration
#flash bank lpc2000 0x0 0x7D000 0 0 lpc2000_v2 0 14765 calc_checksum
flash bank lpc2000 0x0 0x7D000 0 0 0 lpc2000_v2 12000 calc_checksum
arm7_9 swbkpts enable
# For more information about the configuration files, take a look at:
# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger