X-Git-Url: https://git.gag.com/?p=fw%2Fcortex-toolchain;a=blobdiff_plain;f=summon-arm-toolchain;h=9eeceb15509d37e6deafe42d65f0fc389de4df8a;hp=c04d664f4b4e40a3bc688ba3ee8decf3e5edc3ac;hb=eb973fbc4d38368aff03c18eb50418e25555dbc7;hpb=d67af7367ca41a783279d18a451c18761acb0f92 diff --git a/summon-arm-toolchain b/summon-arm-toolchain index c04d664..9eeceb1 100755 --- a/summon-arm-toolchain +++ b/summon-arm-toolchain @@ -9,13 +9,29 @@ # libmpc-dev autoconf texinfo build-essential # +# Stop if any command fails +set -e + TARGET=arm-none-eabi # Or: TARGET=arm-elf PREFIX=${HOME}/arm-none-eabi # Install location of your final toolchain PARALLEL= # Or: PARALLEL="-j 5" for 4 CPUs DARWIN_OPT_PATH=/opt/local # Path in which MacPorts or Fink is installed +# Set to 'sudo' if you need superuser privileges while installing +SUDO= +# Set to 1 to be quieter while running +QUIET=1 + +# For FSF GCC: +GCCVERSION=4.5.1 +GCC=gcc-${GCCVERSION} +GCCURL=http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.gz + +# For the Linaro GCC: +# GCCVERSION=4.5-2010.08-1 +# GCC=gcc-linaro-${GCCVERSION} +# GCCURL=http://launchpad.net/gcc-linaro/4.5/${GCCVERSION}/+download/${GCC}.tar.gz BINUTILS=binutils-2.20 -GCC=gcc-4.5.1 NEWLIB=newlib-1.18.0 GDB=gdb-7.2 LIBCMSIS=v1.10-2 @@ -29,16 +45,27 @@ SUMMON_DIR=$(pwd) SOURCES=${SUMMON_DIR}/sources STAMPS=${SUMMON_DIR}/stamps +MAKEFLAGS=${PARALLEL} +TARFLAGS=v + +if [ ${QUIET} != 0 ]; then + TARFLAGS= + MAKEFLAGS="${MAKEFLAGS} -s" +fi + export PATH="${PREFIX}/bin:${PATH}" GCCFLAGS= GDBFLAGS= BINUTILFLAGS= +# To default to the Cortex-M3: +# GCCFLAGS="--with-arch=armv7-m --with-mode=thumb" + # Fetch a versioned file from a URL function fetch { if [ ! -e ${STAMPS}/$1.fetch ]; then - echo "Downloading $1 sources..." + log "Downloading $1 sources..." wget -c --no-passive-ftp $2 touch ${STAMPS}/$1.fetch fi @@ -53,8 +80,15 @@ function log { # Unpack an archive function unpack { + log Unpacking $* # Use 'auto' mode decompression. Replace with a switch if tar doesn't support -a - tar xvaf $1 + tar xaf${TARFLAGS} ${SOURCES}/$1.tar.* +} + +# Install a build +function install { + log $1 + ${SUDO} make ${MAKEFLAGS} $2 $3 $4 $5 $6 $7 $8 } case "$(uname)" in @@ -80,13 +114,13 @@ mkdir -p ${STAMPS} ${SOURCES} cd ${SOURCES} fetch ${BINUTILS} http://ftp.gnu.org/gnu/binutils/${BINUTILS}.tar.bz2 -fetch ${GCC} ${GCC_URL} +fetch ${GCC} ${GCCURL} fetch ${NEWLIB} ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz fetch ${GDB} http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2 if [ ${LIBSTM32_EN} != 0 ]; then if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then - echo "Cloning libcmsis sources..." + log "Cloning libcmsis sources..." git clone git://git.open-bldc.org/libcmsis.git cd libcmsis git archive --format=tar --prefix=libcmsis-${LIBCMSIS}/ ${LIBCMSIS} | \ @@ -96,7 +130,7 @@ if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then fi if [ ! -e libstm32-${LIBSTM32}.tar.bz2 ]; then - echo "Cloning libstm32 sources..." + log "Cloning libstm32 sources..." git clone git://git.open-bldc.org/libstm32.git cd libstm32 git archive --format=tar --prefix=libstm32-${LIBSTM32}/ ${LIBSTM32} | \ @@ -106,7 +140,7 @@ if [ ! -e libstm32-${LIBSTM32}.tar.bz2 ]; then fi if [ ! -e libstm32usb-${LIBSTM32USB}.tar.bz2 ]; then - echo "Cloning libstm32usb sources..." + log "Cloning libstm32usb sources..." git clone git://git.open-bldc.org/libstm32usb.git cd libstm32usb git archive --format=tar --prefix=libstm32usb-${LIBSTM32USB}/ ${LIBSTM32USB} | \ @@ -118,7 +152,7 @@ fi if [ ${LIBOPENSTM32_EN} != 0 ]; then if [ ! -e libopenstm32-${LIBOPENSTM32}.tar.bz2 ]; then - echo "Cloning libopenstm32 sources..." + log "Cloning libopenstm32 sources..." git clone git://libopenstm32.git.sourceforge.net/gitroot/libopenstm32/libopenstm32 cd libopenstm32 git archive --format=tar --prefix=libopenstm32-${LIBOPENSTM32}/ ${LIBOPENSTM32} | \ @@ -135,8 +169,7 @@ if [ ! -e build ]; then fi if [ ! -e ${STAMPS}/${BINUTILS}.build ]; then - log "Unpacking ${BINUTILS}" - unpack ${SOURCES}/${BINUTILS}.tar.bz2 + unpack ${BINUTILS} cd build log "Configuring ${BINUTILS}" ../${BINUTILS}/configure --target=${TARGET} \ @@ -147,11 +180,10 @@ if [ ! -e ${STAMPS}/${BINUTILS}.build ]; then --with-gnu-ld \ --disable-nls \ --disable-werror \ - ${BINUTILFLAGS} || exit + ${BINUTILFLAGS} log "Building ${BINUTILS}" - make ${PARALLEL} || exit - log "Installing ${BINUTILS}" - make install || exit + make ${MAKEFLAGS} + install ${BINUTILS} install cd .. log "Cleaning up ${BINUTILS}" touch ${STAMPS}/${BINUTILS}.build @@ -159,8 +191,7 @@ if [ ! -e ${STAMPS}/${BINUTILS}.build ]; then fi if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then - log "Unpacking ${GCC}-boot" - unpack ${SOURCES}/${GCC}.tar.bz2 + unpack ${GCC} boot cd build log "Configuring ${GCC}-boot" ../${GCC}/configure --target=${TARGET} \ @@ -175,11 +206,10 @@ if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then --with-gnu-ld \ --disable-nls \ --disable-werror \ - ${GCCFLAGS} || exit + ${GCCFLAGS} log "Building ${GCC}-boot" - make ${PARALLEL} all-gcc || exit - log "Installing ${GCC}-boot" - make install-gcc || exit + make ${MAKEFLAGS} all-gcc + install ${GCC}-boot install-gcc cd .. log "Cleaning up ${GCC}-boot" touch ${STAMPS}/${GCC}-boot.build @@ -187,8 +217,7 @@ if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then fi if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then - log "Unpacking ${NEWLIB}" - unpack ${SOURCES}/${NEWLIB}.tar.gz + unpack ${NEWLIB} cd build log "Configuring ${NEWLIB}" ../${NEWLIB}/configure --target=${TARGET} \ @@ -199,11 +228,10 @@ if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then --with-gnu-ld \ --disable-nls \ --disable-werror \ - --disable-newlib-supplied-syscalls || exit + --disable-newlib-supplied-syscalls log "Building ${NEWLIB}" - make ${PARALLEL} || exit - log "Installing ${NEWLIB}" - make install || exit + make ${MAKEFLAGS} + install ${NEWLIB} install cd .. log "Cleaning up ${NEWLIB}" touch ${STAMPS}/${NEWLIB}.build @@ -212,8 +240,7 @@ fi # Yes, you need to build gcc again! if [ ! -e ${STAMPS}/${GCC}.build ]; then - log "Unpacking ${GCC}" - unpack ${SOURCES}/${GCC}.tar.bz2 + unpack ${GCC} cd build log "Configuring ${GCC}" ../${GCC}/configure --target=${TARGET} \ @@ -227,11 +254,10 @@ if [ ! -e ${STAMPS}/${GCC}.build ]; then --with-gnu-ld \ --disable-nls \ --disable-werror \ - ${GCCFLAGS} || exit + ${GCCFLAGS} log "Building ${GCC}" - make ${PARALLEL} || exit - log "Installing ${GCC}" - make install || exit + make ${MAKEFLAGS} + install ${GCC} install cd .. log "Cleaning up ${GCC}" touch ${STAMPS}/${GCC}.build @@ -239,8 +265,7 @@ if [ ! -e ${STAMPS}/${GCC}.build ]; then fi if [ ! -e ${STAMPS}/${GDB}.build ]; then - log "Unpacking ${GDB}" - unpack ${SOURCES}/${GDB}.tar.bz2 + unpack ${GDB} cd build log "Configuring ${GDB}" ../${GDB}/configure --target=${TARGET} \ @@ -248,11 +273,10 @@ if [ ! -e ${STAMPS}/${GDB}.build ]; then --enable-interwork \ --enable-multilib \ --disable-werror \ - ${GDBFLAGS} || exit + ${GDBFLAGS} log "Building ${GDB}" - make ${PARALLEL} || exit - log "Installing ${GDB}" - make install || exit + make ${MAKEFLAGS} + install ${GDB} install cd .. log "Cleaning up ${GDB}" touch ${STAMPS}/${GDB}.build @@ -261,13 +285,11 @@ fi if [ ${LIBSTM32_EN} != 0 ]; then if [ ! -e .libcmsis-${LIBCMSIS}.build ]; then - log "Unpacking libcmsis-${LIBCMSIS}" - unpack ${SOURCES}/libcmsis-${LIBCMSIS}.tar.bz2 + unpack libcmsis-${LIBCMSIS} cd libcmsis-${LIBCMSIS} log "Building libcmsis-${LIBCMSIS}" - make arch_prefix=${TARGET} prefix=${PREFIX} || exit - log "Installing libcmsis-${LIBCMSIS}" - make arch_prefix=${TARGET} prefix=${PREFIX} install || exit + make arch_prefix=${TARGET} prefix=${PREFIX} + install libcmsis-${LIBCMSIS} arch_prefix=${TARGET} prefix=${PREFIX} install cd .. log "Cleaning up libcmsis-${LIBCMSIS}" touch .libcmsis-${LIBCMSIS}.build @@ -275,13 +297,11 @@ if [ ! -e .libcmsis-${LIBCMSIS}.build ]; then fi if [ ! -e .libstm32-${LIBSTM32}.build ]; then - log "Unpacking libstm32-${LIBSTM32}" - unpack ${SOURCES}/libstm32-${LIBSTM32}.tar.bz2 + unpack libstm32-${LIBSTM32} cd libstm32-${LIBSTM32} log "Building libstm32-${LIBSTM32}" - make arch_prefix=${TARGET} prefix=${PREFIX} || exit - log "Installing libstm32-${LIBSTM32}" - make arch_prefix=${TARGET} prefix=${PREFIX} install || exit + make arch_prefix=${TARGET} prefix=${PREFIX} + install libstm32-${LIBSTM32} arch_prefix=${TARGET} prefix=${PREFIX} install cd .. log "Cleaning up libstm32-${LIBSTM32}" touch .libstm32-${LIBSTM32}.build @@ -289,13 +309,11 @@ if [ ! -e .libstm32-${LIBSTM32}.build ]; then fi if [ ! -e .libstm32usb-${LIBSTM32USB}.build ]; then - log "Unpacking libstm32usb-${LIBSTM32USB}" - unpack ${SOURCES}/libstm32usb-${LIBSTM32USB}.tar.bz2 + unpack libstm32usb-${LIBSTM32USB} cd libstm32usb-${LIBSTM32USB} log "Building libstm32usb-${LIBSTM32USB}" - make arch_prefix=${TARGET} prefix=${PREFIX} || exit - log "Installing libstm32usb-${LIBSTM32USB}" - make arch_prefix=${TARGET} prefix=${PREFIX} install || exit + make arch_prefix=${TARGET} prefix=${PREFIX} + install libstm32usb-${LIBSTM32USB} arch_prefix=${TARGET} prefix=${PREFIX} install cd .. log "Cleaning up libstm32usb-${LIBSTM32USB}" touch .libstm32usb-${LIBSTM32USB}.build @@ -304,13 +322,11 @@ fi fi if [ $LIBOPENSTM32_EN != 0 ]; then - log "Unpacking libopenstm32-${LIBOPENSTM32}" - unpack ${SOURCES}/libopenstm32-${LIBOPENSTM32}.tar.bz2 + unpack libopenstm32-${LIBOPENSTM32} cd libopenstm32-${LIBOPENSTM32} log "Building libopenstm32-${LIBOPENSTM32}" - make PREFIX=${TARGET} DESTDIR=${PREFIX} || exit - log "Installing libopenstm32-${LIBOPENSTM32}" - make PREFIX=${TARGET} DESTDIR=${PREFIX} install || exit + make PREFIX=${TARGET} DESTDIR=${PREFIX} + install libopenstm32-${LIBOPENSTM32} PREFIX=${TARGET} DESTDIR=${PREFIX} install cd .. log "Cleaning up libopenstm32-${LIBOPENSTM32}" touch .libopenstm32-${LIBOPENSTM32}.build