X-Git-Url: https://git.gag.com/?p=fw%2Fcortex-toolchain;a=blobdiff_plain;f=summon-arm-toolchain;h=558f3149839488e4c1c2911070b9dd3d23a3f277;hp=fa6d103dfdefe14a67a08be468f29c904d7eec46;hb=b14785fb35e726359d668300ea628613c74cbb51;hpb=902b6a0f6629abf8ac1c0245cbb572e11ab530af diff --git a/summon-arm-toolchain b/summon-arm-toolchain index fa6d103..558f314 100755 --- a/summon-arm-toolchain +++ b/summon-arm-toolchain @@ -8,43 +8,218 @@ # apt-get install flex bison libgmp3-dev libmpfr-dev libncurses5-dev \ # libmpc-dev autoconf texinfo build-essential # +# Or on Ubuntu Maverick give `apt-get build-dep gcc-4.5` a try. +# # Stop if any command fails set -e +############################################################################## +# Default settings section +# You probably want to customize those +# You can also pass them as parameters to the script +############################################################################## TARGET=arm-none-eabi # Or: TARGET=arm-elf -PREFIX=${HOME}/arm-none-eabi # Install location of your final toolchain -PARALLEL= # Or: PARALLEL="-j 5" for 4 CPUs +PREFIX=${HOME}/sat # Install location of your final toolchain DARWIN_OPT_PATH=/opt/local # Path in which MacPorts or Fink is installed +# Set to 'sudo' if you need superuser privileges while installing +SUDO= +# Set to 1 to be quieter while running +QUIET=0 +# Set to 1 to use linaro gcc instead of the FSF gcc +USE_LINARO=1 +# Set to 1 to enable building of OpenOCD +OOCD_EN=1 +# Set to 1 to build libstm32 provided by ST +LIBSTM32_EN=0 +# Set to 1 to build libopenstm32 an open source library for stm32 +LIBOPENSTM32_EN=1 +# Make the gcc default to Cortex-M3 +DEFAULT_TO_CORTEX_M3=0 +# Override automatic detection of cpus to compile on +CPUS= + +############################################################################## +# Parsing command line parameters +############################################################################## + +while [ $# -gt 0 ]; do + case $1 in + TARGET=*) + TARGET=$(echo $1 | sed 's,^TARGET=,,') + ;; + PREFIX=*) + PREFIX=$(echo $1 | sed 's,^PREFIX=,,') + ;; + DARWIN_OPT_PATH=*) + DARWIN_OPT_PATH=$(echo $1 | sed 's,^DARWIN_OPT_PATH=,,') + ;; + SUDO=*) + SUDO=$(echo $1 | sed 's,^SUDO=,,') + ;; + QUIET=*) + QUIET=$(echo $1 | sed 's,^QUIET=,,') + ;; + USE_LINARO=*) + USE_LINARO=$(echo $1 | sed 's,^USE_LINARO=,,') + ;; + OOCD_EN=*) + OOCD_EN=$(echo $1 | sed 's,^OOCD_EN=,,') + ;; + LIBSTM32_EN=*) + LIBSTM32_EN=$(echo $1 | sed 's,^LIBSTM32_EN=,,') + ;; + LIBOPENSTM32_EN=*) + LIBOPENSTM32_EN=$(echo $1 | sed 's,^LIBOPENSTM32_EN=,,') + ;; + DEFAULT_TO_CORTEX_M3=*) + DEFAULT_TO_CORTEX_M3=$(echo $1 | sed 's,^DEFAULT_TO_CORTEX_M3=,,') + ;; + CPUS=*) + CPUS=$(echo $1 | sed 's,^CPUS=,,') + ;; + *) + echo "Unknown parameter: $1" + exit 1 + ;; + esac + + shift # shifting parameter list to access the next one +done + +echo "Settings used for this build are:" +echo "TARGET=$TARGET" +echo "PREFIX=$PREFIX" +echo "DARWIN_OPT_PATH=$DARWIN_OPT_PATH" +echo "SUDO=$SUDO" +echo "QUIET=$QUIET" +echo "USE_LINARO=$USE_LINARO" +echo "OOCD_EN=$OOCD_EN" +echo "LIBSTM32_EN=$LIBSTM32_EN" +echo "LIBOPENSTM32_EN=$LIBOPENSTM32_EN" +echo "DEFAULT_TO_CORTEX_M3=$DEFAULT_TO_CORTEX_M3" +echo "CPUS=$CPUS" -BINUTILS=binutils-2.20 -GCC=gcc-4.5.1 -NEWLIB=newlib-1.18.0 -GDB=gdb-7.2 -LIBCMSIS=v1.10-2 -LIBSTM32=v3.0.0-1 +############################################################################## +# Version and download url settings section +############################################################################## +if [ ${USE_LINARO} == 0 ] ; then + # For FSF GCC: + GCCVERSION=4.5.2 + GCC=gcc-${GCCVERSION} + GCCURL=http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.gz +else + # For the Linaro GCC: + GCCRELEASE=4.5-2011.02-0 + GCCVERSION=4.5-2011.02-0 + GCC=gcc-linaro-${GCCVERSION} + GCCURL=http://launchpad.net/gcc-linaro/4.5/${GCCRELEASE}/+download/${GCC}.tar.bz2 +fi + +BINUTILS=binutils-2.21.1 +NEWLIB=newlib-1.19.0 +GDB=gdb-7.3.1 +OOCD=master +LIBCMSIS=v1.10-3 +LIBSTM32=v3.0.0-2 LIBSTM32USB=v3.0.1-1 LIBOPENSTM32=master -LIBSTM32_EN=0 -LIBOPENSTM32_EN=0 -SUDO= +############################################################################## +# Flags section +############################################################################## + +if [ "x${CPUS}" == "x" ]; then + if which getconf > /dev/null; then + CPUS=$(getconf _NPROCESSORS_ONLN) + else + CPUS=1 + fi + + PARALLEL=-j$((CPUS + 1)) +else + PARALLEL=-j${CPUS} +fi + +echo "${CPUS} cpu's detected running make with '${PARALLEL}' flag" + +GDBFLAGS= +BINUTILFLAGS= + +if [ ${DEFAULT_TO_CORTEX_M3} == 0 ] ; then + GCCFLAGS= +else + # To default to the Cortex-M3: + GCCFLAGS="--with-arch=armv7-m --with-mode=thumb --with-float=soft" +fi + +# Pull in the local configuration, if any +if [ -f local.sh ]; then + . ./local.sh +fi + +MAKEFLAGS=${PARALLEL} +TARFLAGS=v + +if [ ${QUIET} != 0 ]; then + TARFLAGS= + MAKEFLAGS="${MAKEFLAGS} -s" +fi + +export PATH="${PREFIX}/bin:${PATH}" + SUMMON_DIR=$(pwd) SOURCES=${SUMMON_DIR}/sources STAMPS=${SUMMON_DIR}/stamps -export PATH="${PREFIX}/bin:${PATH}" -GCCFLAGS= -GDBFLAGS= -BINUTILFLAGS= +############################################################################## +# Tool section +############################################################################## +TAR=tar + +############################################################################## +# OS and Tooldetection section +# Detects which tools and flags to use +############################################################################## + +case "$(uname)" in + Linux) + echo "Found Linux OS." + ;; + Darwin) + echo "Found Darwin OS." + GCCFLAGS="${GCCFLAGS} \ + --with-gmp=${DARWIN_OPT_PATH} \ + --with-mpfr=${DARWIN_OPT_PATH} \ + --with-mpc=${DARWIN_OPT_PATH} \ + --with-libiconv-prefix=${DARWIN_OPT_PATH}" + OOCD_CFLAGS="-I/opt/mine/include -I/opt/local/include" + OOCD_LDFLAGS="-L/opt/mine/lib -L/opt/local/lib" + if gcc --version | grep llvm-gcc > /dev/null ; then + echo "Found you are using llvm gcc, switching to clang for gcc compile." + GCC_CC=clang + fi + ;; + CYGWIN*) + echo "Found CygWin that means Windows most likely." + ;; + *) + echo "Found unknown OS. Aborting!" + exit 1 + ;; +esac + +############################################################################## +# Building section +# You probably don't have to touch anything after this +############################################################################## # Fetch a versioned file from a URL function fetch { if [ ! -e ${STAMPS}/$1.fetch ]; then - echo "Downloading $1 sources..." - wget -c --no-passive-ftp $2 - touch ${STAMPS}/$1.fetch + log "Downloading $1 sources..." + wget -c --no-passive-ftp $2 && touch ${STAMPS}/$1.fetch fi } @@ -59,45 +234,58 @@ function log { function unpack { log Unpacking $* # Use 'auto' mode decompression. Replace with a switch if tar doesn't support -a - tar xvaf ${SOURCES}/$1.tar.* + ARCHIVE=$(ls ${SOURCES}/$1.tar.*) + case ${ARCHIVE} in + *.bz2) + echo "archive type bz2" + TYPE=j + ;; + *.gz) + echo "archive type gz" + TYPE=z + ;; + *) + echo "Unknown archive type of $1" + echo ${ARCHIVE} + exit 1 + ;; + esac + ${TAR} xf${TYPE}${TARFLAGS} ${SOURCES}/$1.tar.* } # Install a build function install { log $1 - ${SUDO} make ${PARALLEL} $2 $3 $4 $5 $6 $7 $8 + ${SUDO} make ${MAKEFLAGS} $2 $3 $4 $5 $6 $7 $8 } -case "$(uname)" in - Linux) - echo "Found Linux OS." - ;; - Darwin) - echo "Found Darwin OS." - GCCFLAGS="${GCCFLAGS} \ - --with-gmp=${DARWIN_OPT_PATH} \ - --with-mpfr=${DARWIN_OPT_PATH} \ - --with-mpc=${DARWIN_OPT_PATH} \ - -with-libiconv-prefix=${DARWIN_OPT_PATH}" - ;; - *) - echo "Found unknown OS. Aborting!" - exit 1 - ;; -esac mkdir -p ${STAMPS} ${SOURCES} cd ${SOURCES} fetch ${BINUTILS} http://ftp.gnu.org/gnu/binutils/${BINUTILS}.tar.bz2 -fetch ${GCC} http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.gz +fetch ${GCC} ${GCCURL} fetch ${NEWLIB} ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz fetch ${GDB} http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2 +if [ ${OOCD_EN} != 0 ]; then +if [ ! -e openocd-${OOCD}.tar.bz2 ]; then + log "Cloning OpenOCD sources..." + git clone git://openocd.git.sourceforge.net/gitroot/openocd/openocd openocd-${OOCD} + cd openocd-${OOCD} + ./bootstrap + cd .. + tar cfvj openocd-${OOCD}.tar.bz2 openocd-${OOCD} + #git archive --format=tar --prefix=openocd-${OOCD}/ ${OOCD} | \ + # bzip2 --stdout > ../openocd-${OOCD}.tar.bz2 + rm -rf openocd-${OOCD} +fi +fi + if [ ${LIBSTM32_EN} != 0 ]; then if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then - echo "Cloning libcmsis sources..." + log "Cloning libcmsis sources..." git clone git://git.open-bldc.org/libcmsis.git cd libcmsis git archive --format=tar --prefix=libcmsis-${LIBCMSIS}/ ${LIBCMSIS} | \ @@ -107,7 +295,7 @@ if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then fi if [ ! -e libstm32-${LIBSTM32}.tar.bz2 ]; then - echo "Cloning libstm32 sources..." + log "Cloning libstm32 sources..." git clone git://git.open-bldc.org/libstm32.git cd libstm32 git archive --format=tar --prefix=libstm32-${LIBSTM32}/ ${LIBSTM32} | \ @@ -117,7 +305,7 @@ if [ ! -e libstm32-${LIBSTM32}.tar.bz2 ]; then fi if [ ! -e libstm32usb-${LIBSTM32USB}.tar.bz2 ]; then - echo "Cloning libstm32usb sources..." + log "Cloning libstm32usb sources..." git clone git://git.open-bldc.org/libstm32usb.git cd libstm32usb git archive --format=tar --prefix=libstm32usb-${LIBSTM32USB}/ ${LIBSTM32USB} | \ @@ -129,7 +317,7 @@ fi if [ ${LIBOPENSTM32_EN} != 0 ]; then if [ ! -e libopenstm32-${LIBOPENSTM32}.tar.bz2 ]; then - echo "Cloning libopenstm32 sources..." + log "Cloning libopenstm32 sources..." git clone git://libopenstm32.git.sourceforge.net/gitroot/libopenstm32/libopenstm32 cd libopenstm32 git archive --format=tar --prefix=libopenstm32-${LIBOPENSTM32}/ ${LIBOPENSTM32} | \ @@ -150,16 +338,16 @@ if [ ! -e ${STAMPS}/${BINUTILS}.build ]; then cd build log "Configuring ${BINUTILS}" ../${BINUTILS}/configure --target=${TARGET} \ - --prefix=${PREFIX} \ - --enable-interwork \ - --enable-multilib \ - --with-gnu-as \ - --with-gnu-ld \ - --disable-nls \ - --disable-werror \ - ${BINUTILFLAGS} + --prefix=${PREFIX} \ + --enable-interwork \ + --enable-multilib \ + --with-gnu-as \ + --with-gnu-ld \ + --disable-nls \ + --disable-werror \ + ${BINUTILFLAGS} log "Building ${BINUTILS}" - make ${PARALLEL} + make ${MAKEFLAGS} install ${BINUTILS} install cd .. log "Cleaning up ${BINUTILS}" @@ -167,78 +355,64 @@ if [ ! -e ${STAMPS}/${BINUTILS}.build ]; then rm -rf build/* ${BINUTILS} fi -if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then - unpack ${GCC} boot - cd build - log "Configuring ${GCC}-boot" - ../${GCC}/configure --target=${TARGET} \ - --prefix=${PREFIX} \ - --enable-interwork \ - --enable-multilib \ - --enable-languages="c" \ - --with-newlib \ - --without-headers \ - --disable-shared \ - --with-gnu-as \ - --with-gnu-ld \ - --disable-nls \ - --disable-werror \ - ${GCCFLAGS} - log "Building ${GCC}-boot" - make ${PARALLEL} all-gcc - install ${GCC}-boot install-gcc - cd .. - log "Cleaning up ${GCC}-boot" - touch ${STAMPS}/${GCC}-boot.build - rm -rf build/* ${GCC} -fi - -if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then +if [ ! -e ${STAMPS}/${GCC}-${NEWLIB}.build ]; then + unpack ${GCC} unpack ${NEWLIB} - cd build - log "Configuring ${NEWLIB}" - ../${NEWLIB}/configure --target=${TARGET} \ - --prefix=${PREFIX} \ - --enable-interwork \ - --enable-multilib \ - --with-gnu-as \ - --with-gnu-ld \ - --disable-nls \ - --disable-werror \ - --disable-newlib-supplied-syscalls - log "Building ${NEWLIB}" - make ${PARALLEL} - install ${NEWLIB} install - cd .. - log "Cleaning up ${NEWLIB}" - touch ${STAMPS}/${NEWLIB}.build - rm -rf build/* ${NEWLIB} -fi -# Yes, you need to build gcc again! -if [ ! -e ${STAMPS}/${GCC}.build ]; then - unpack ${GCC} + log "Adding newlib symlink to gcc" + ln -f -s `pwd`/${NEWLIB}/newlib ${GCC} + log "Adding libgloss symlink to gcc" + ln -f -s `pwd`/${NEWLIB}/libgloss ${GCC} + + if [ ${DEFAULT_TO_CORTEX_M3} == 0 ] ; then + log "Patching gcc to add multilib support" + cd ${GCC} + patch -p0 -i ../patches/patch-gcc-config-arm-t-arm-elf.diff + cd .. + fi + cd build - log "Configuring ${GCC}" + if [ "X${GCC_CC}" != "X" ] ; then + export GLOBAL_CC=${CC} + log "Overriding the default compiler with: \"${GCC_CC}\"" + export CC=${GCC_CC} + fi + + log "Configuring ${GCC} and ${NEWLIB}" ../${GCC}/configure --target=${TARGET} \ --prefix=${PREFIX} \ --enable-interwork \ --enable-multilib \ --enable-languages="c,c++" \ --with-newlib \ - --disable-shared \ --with-gnu-as \ --with-gnu-ld \ - --disable-nls \ + --disable-nls \ + --disable-shared \ + --disable-threads \ + --with-headers=newlib/libc/include \ + --disable-libssp \ + --disable-libstdcxx-pch \ + --disable-libmudflap \ + --disable-libgomp \ --disable-werror \ - ${GCCFLAGS} - log "Building ${GCC}" - make ${PARALLEL} + --with-system-zlib \ + --disable-newlib-supplied-syscalls \ + ${GCCFLAGS} + log "Building ${GCC} and ${NEWLIB}" + make ${MAKEFLAGS} install ${GCC} install cd .. - log "Cleaning up ${GCC}" - touch ${STAMPS}/${GCC}.build - rm -rf build/* ${GCC} + log "Cleaning up ${GCC} and ${NEWLIB}" + + if [ "X${GCC_CC}" != "X" ] ; then + unset CC + CC=${GLOBAL_CC} + unset GLOBAL_CC + fi + + touch ${STAMPS}/${GCC}-${NEWLIB}.build + rm -rf build/* ${GCC} ${NEWLIB} fi if [ ! -e ${STAMPS}/${GDB}.build ]; then @@ -252,7 +426,7 @@ if [ ! -e ${STAMPS}/${GDB}.build ]; then --disable-werror \ ${GDBFLAGS} log "Building ${GDB}" - make ${PARALLEL} + make ${MAKEFLAGS} install ${GDB} install cd .. log "Cleaning up ${GDB}" @@ -260,8 +434,39 @@ if [ ! -e ${STAMPS}/${GDB}.build ]; then rm -rf build/* ${GDB} fi +if [ ${OOCD_EN} != 0 ]; then +if [ ! -e ${STAMPS}/openocd-${OOCD}.build ]; then + unpack openocd-${OOCD} + cd build + log "Configuring openocd-${OOCD}" + CFLAGS="${CFLAGS} ${OOCD_CFLAGS}" \ + LDFLAGS="${LDFLAGS} ${OOCD_LDFLAGS}" \ + ../openocd-${OOCD}/configure --enable-maintainer-mode \ + --disable-werror \ + --prefix=${PREFIX} \ + --enable-dummy \ + --enable-ft2232_libftdi \ + --enable-usb_blaster_libftdi \ + --enable-ep93xx \ + --enable-at91rm9200 \ + --enable-presto_libftdi \ + --enable-usbprog \ + --enable-jlink \ + --enable-vsllink \ + --enable-rlink \ + --enable-arm-jtag-ew + log "Building openocd-${OOCD}" + make ${MAKEFLAGS} + install openocd-${OOCD} install + cd .. + log "Cleaning up openocd-${OOCD}" + touch ${STAMPS}/openocd-${OOCD}.build + rm -rf build/* ${OOCD} +fi +fi + if [ ${LIBSTM32_EN} != 0 ]; then -if [ ! -e .libcmsis-${LIBCMSIS}.build ]; then +if [ ! -e ${STAMPS}/libcmsis-${LIBCMSIS}.build ]; then unpack libcmsis-${LIBCMSIS} cd libcmsis-${LIBCMSIS} log "Building libcmsis-${LIBCMSIS}" @@ -269,11 +474,11 @@ if [ ! -e .libcmsis-${LIBCMSIS}.build ]; then install libcmsis-${LIBCMSIS} arch_prefix=${TARGET} prefix=${PREFIX} install cd .. log "Cleaning up libcmsis-${LIBCMSIS}" - touch .libcmsis-${LIBCMSIS}.build + touch ${STAMPS}/libcmsis-${LIBCMSIS}.build rm -rf libcmsis-${LIBCMSIS} fi -if [ ! -e .libstm32-${LIBSTM32}.build ]; then +if [ ! -e ${STAMPS}/libstm32-${LIBSTM32}.build ]; then unpack libstm32-${LIBSTM32} cd libstm32-${LIBSTM32} log "Building libstm32-${LIBSTM32}" @@ -281,11 +486,11 @@ if [ ! -e .libstm32-${LIBSTM32}.build ]; then install libstm32-${LIBSTM32} arch_prefix=${TARGET} prefix=${PREFIX} install cd .. log "Cleaning up libstm32-${LIBSTM32}" - touch .libstm32-${LIBSTM32}.build + touch ${STAMPS}/libstm32-${LIBSTM32}.build rm -rf libstm32-${LIBSTM32} fi -if [ ! -e .libstm32usb-${LIBSTM32USB}.build ]; then +if [ ! -e ${STAMPS}/libstm32usb-${LIBSTM32USB}.build ]; then unpack libstm32usb-${LIBSTM32USB} cd libstm32usb-${LIBSTM32USB} log "Building libstm32usb-${LIBSTM32USB}" @@ -293,12 +498,13 @@ if [ ! -e .libstm32usb-${LIBSTM32USB}.build ]; then install libstm32usb-${LIBSTM32USB} arch_prefix=${TARGET} prefix=${PREFIX} install cd .. log "Cleaning up libstm32usb-${LIBSTM32USB}" - touch .libstm32usb-${LIBSTM32USB}.build + touch ${STAMPS}/libstm32usb-${LIBSTM32USB}.build rm -rf libstm32usb-${LIBSTM32USB} fi fi if [ $LIBOPENSTM32_EN != 0 ]; then +if [ ! -e ${STAMPS}/libopenstm32-${LIBOPENSTM32}.build ]; then unpack libopenstm32-${LIBOPENSTM32} cd libopenstm32-${LIBOPENSTM32} log "Building libopenstm32-${LIBOPENSTM32}" @@ -306,6 +512,7 @@ if [ $LIBOPENSTM32_EN != 0 ]; then install libopenstm32-${LIBOPENSTM32} PREFIX=${TARGET} DESTDIR=${PREFIX} install cd .. log "Cleaning up libopenstm32-${LIBOPENSTM32}" - touch .libopenstm32-${LIBOPENSTM32}.build + touch ${STAMPS}/libopenstm32-${LIBOPENSTM32}.build rm -rf libopenstm32-${LIBOPENSTM32} fi +fi