X-Git-Url: https://git.gag.com/?p=fw%2Fcortex-toolchain;a=blobdiff_plain;f=summon-arm-toolchain;h=0d6385d3761f456d32b94bd5796af9965f2b88f7;hp=46724fd5556ce5074cad6cce1d3003d1c48edbb2;hb=d6c345c10750661f5002441db6378f14b3a19df5;hpb=1c3dd9aadc51572b6209c77e8528aa7191b93b1d

diff --git a/summon-arm-toolchain b/summon-arm-toolchain
index 46724fd..0d6385d 100755
--- a/summon-arm-toolchain
+++ b/summon-arm-toolchain
@@ -8,41 +8,129 @@
 # apt-get install flex bison libgmp3-dev libmpfr-dev libncurses5-dev \
 # libmpc-dev autoconf texinfo build-essential
 #
+# Or on Ubuntu Maverick give `apt-get build-dep gcc-4.5` a try.
+#
 
 # Stop if any command fails
 set -e
 
+##############################################################################
+# Settings section
+# You probably want to customize those
+##############################################################################
 TARGET=arm-none-eabi		# Or: TARGET=arm-elf
-PREFIX=${HOME}/arm-none-eabi	# Install location of your final toolchain
+PREFIX=${HOME}/sat	# Install location of your final toolchain
 PARALLEL=			# Or: PARALLEL="-j 5" for 4 CPUs
 DARWIN_OPT_PATH=/opt/local	# Path in which MacPorts or Fink is installed
+# Set to 'sudo' if you need superuser privileges while installing
+SUDO=
+# Set to 1 to be quieter while running
+QUIET=0
+# Set to 1 to use linaro gcc instead of the FSF gcc
+USE_LINARO=0
+# Set to 1 to build libstm32 provided by ST
+LIBSTM32_EN=0
+# Set to 1 to build libopenstm32 an open source library for stm32
+LIBOPENSTM32_EN=0
+# Make the gcc default to Cortex-M3
+DEFAULT_TO_CORTEX_M3=0
+
+##############################################################################
+# Version and download url settings section
+##############################################################################
+if [ ${USE_LINARO} == 0 ] ; then
+	# For FSF GCC:
+	GCCVERSION=4.5.1
+	GCC=gcc-${GCCVERSION}
+	GCCURL=http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.gz
+else
+	# For the Linaro GCC:
+	GCCVERSION=4.5-2010.08-1
+	GCC=gcc-linaro-${GCCVERSION}
+	GCCURL=http://launchpad.net/gcc-linaro/4.5/${GCCVERSION}/+download/${GCC}.tar.gz
+fi
 
 BINUTILS=binutils-2.20
-GCC=gcc-4.5.1
 NEWLIB=newlib-1.18.0
 GDB=gdb-7.2
 LIBCMSIS=v1.10-2
 LIBSTM32=v3.0.0-1
 LIBSTM32USB=v3.0.1-1
 LIBOPENSTM32=master
-LIBSTM32_EN=0
-LIBOPENSTM32_EN=0
 
-SUDO=
+##############################################################################
+# Flags section
+##############################################################################
+
+GDBFLAGS=
+BINUTILFLAGS=
+
+if [ ${DEFAULT_TO_CORTEX_M3} == 0 ] ; then
+	GCCFLAGS=
+else
+	# To default to the Cortex-M3:
+	GCCFLAGS="--with-arch=armv7-m --with-mode=thumb"
+fi
+
+# Pull in the local configuration, if any
+if [ -f local.sh ]; then
+    . ./local.sh
+fi
+
+MAKEFLAGS=${PARALLEL}
+TARFLAGS=v
+
+if [ ${QUIET} != 0 ]; then
+    TARFLAGS=
+    MAKEFLAGS="${MAKEFLAGS} -s"
+fi
+
+export PATH="${PREFIX}/bin:${PATH}"
+
 SUMMON_DIR=$(pwd)
 SOURCES=${SUMMON_DIR}/sources
 STAMPS=${SUMMON_DIR}/stamps
 
-export PATH="${PREFIX}/bin:${PATH}"
+##############################################################################
+# OS and Tooldetection section
+# Detects which tools to use
+##############################################################################
 
-GCCFLAGS=
-GDBFLAGS=
-BINUTILFLAGS=
+case "$(uname)" in
+	Linux)
+	echo "Found Linux OS."
+	TAR=tar
+	;;
+	Darwin)
+	echo "Found Darwin OS."
+	GCCFLAGS="${GCCFLAGS} \
+                  --with-gmp=${DARWIN_OPT_PATH} \
+	          --with-mpfr=${DARWIN_OPT_PATH} \
+	          --with-mpc=${DARWIN_OPT_PATH} \
+		  -with-libiconv-prefix=${DARWIN_OPT_PATH}"
+        if ! which gnutar > /dev/null ; then
+		echo "ERROR: GNU tar not found! (try 'sudo port install gnutar')"
+		exit 1
+	else
+		echo "GNU tar found!"
+		TAR=gnutar
+	fi
+	;;
+	*)
+	echo "Found unknown OS. Aborting!"
+	exit 1
+	;;
+esac
+
+##############################################################################
+# Building section
+# You probably don't have to touch anything after this
+##############################################################################
 
 # Fetch a versioned file from a URL
 function fetch {
     if [ ! -e ${STAMPS}/$1.fetch ]; then
-        echo "Downloading $1 sources..."
+        log "Downloading $1 sources..."
         wget -c --no-passive-ftp $2
         touch ${STAMPS}/$1.fetch
     fi
@@ -57,46 +145,30 @@ function log {
 
 # Unpack an archive
 function unpack {
+    log Unpacking $*
     # Use 'auto' mode decompression.  Replace with a switch if tar doesn't support -a
-    tar xvaf $1
+    ${TAR} xaf${TARFLAGS} ${SOURCES}/$1.tar.*
 }
 
 # Install a build
 function install {
     log $1
-    ${SUDO} make ${PARALLEL} $2 $3 $4 $5 $6 $7 $8
+    ${SUDO} make ${MAKEFLAGS} $2 $3 $4 $5 $6 $7 $8
 }
 
-case "$(uname)" in
-	Linux)
-	echo "Found Linux OS."
-	;;
-	Darwin)
-	echo "Found Darwin OS."
-	GCCFLAGS="${GCCFLAGS} \
-                  --with-gmp=${DARWIN_OPT_PATH} \
-	          --with-mpfr=${DARWIN_OPT_PATH} \
-	          --with-mpc=${DARWIN_OPT_PATH} \
-		  -with-libiconv-prefix=${DARWIN_OPT_PATH}"
-	;;
-	*)
-	echo "Found unknown OS. Aborting!"
-	exit 1
-	;;
-esac
 
 mkdir -p ${STAMPS} ${SOURCES}
 
 cd ${SOURCES}
 
 fetch ${BINUTILS} http://ftp.gnu.org/gnu/binutils/${BINUTILS}.tar.bz2
-fetch ${GCC} ${GCC_URL}
+fetch ${GCC} ${GCCURL}
 fetch ${NEWLIB} ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz
 fetch ${GDB} http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2
 
 if [ ${LIBSTM32_EN} != 0 ]; then
 if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then
-	echo "Cloning libcmsis sources..."
+	log "Cloning libcmsis sources..."
 	git clone git://git.open-bldc.org/libcmsis.git
         cd libcmsis
         git archive --format=tar --prefix=libcmsis-${LIBCMSIS}/ ${LIBCMSIS} | \
@@ -106,7 +178,7 @@ if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then
 fi
 
 if [ ! -e libstm32-${LIBSTM32}.tar.bz2 ]; then
-	echo "Cloning libstm32 sources..."
+	log "Cloning libstm32 sources..."
 	git clone git://git.open-bldc.org/libstm32.git
         cd libstm32
         git archive --format=tar --prefix=libstm32-${LIBSTM32}/ ${LIBSTM32} | \
@@ -116,7 +188,7 @@ if [ ! -e libstm32-${LIBSTM32}.tar.bz2 ]; then
 fi
 
 if [ ! -e libstm32usb-${LIBSTM32USB}.tar.bz2 ]; then
-	echo "Cloning libstm32usb sources..."
+	log "Cloning libstm32usb sources..."
 	git clone git://git.open-bldc.org/libstm32usb.git
         cd libstm32usb
         git archive --format=tar --prefix=libstm32usb-${LIBSTM32USB}/ ${LIBSTM32USB} | \
@@ -128,7 +200,7 @@ fi
 
 if [ ${LIBOPENSTM32_EN} != 0 ]; then
 if [ ! -e libopenstm32-${LIBOPENSTM32}.tar.bz2 ]; then
-	echo "Cloning libopenstm32 sources..."
+	log "Cloning libopenstm32 sources..."
 	git clone git://libopenstm32.git.sourceforge.net/gitroot/libopenstm32/libopenstm32
         cd libopenstm32
         git archive --format=tar --prefix=libopenstm32-${LIBOPENSTM32}/ ${LIBOPENSTM32} | \
@@ -145,8 +217,7 @@ if [ ! -e build ]; then
 fi
 
 if [ ! -e ${STAMPS}/${BINUTILS}.build ]; then
-    log "Unpacking ${BINUTILS}"
-    unpack ${SOURCES}/${BINUTILS}.tar.bz2
+    unpack ${BINUTILS}
     cd build
     log "Configuring ${BINUTILS}"
     ../${BINUTILS}/configure --target=${TARGET} \
@@ -159,7 +230,7 @@ if [ ! -e ${STAMPS}/${BINUTILS}.build ]; then
                            --disable-werror \
 			   ${BINUTILFLAGS}
     log "Building ${BINUTILS}"
-    make ${PARALLEL}
+    make ${MAKEFLAGS}
     install ${BINUTILS} install
     cd ..
     log "Cleaning up ${BINUTILS}"
@@ -168,8 +239,7 @@ if [ ! -e ${STAMPS}/${BINUTILS}.build ]; then
 fi
 
 if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then
-    log "Unpacking ${GCC}-boot"
-    unpack ${SOURCES}/${GCC}.tar.bz2
+    unpack ${GCC} boot
     cd build
     log "Configuring ${GCC}-boot"
     ../${GCC}/configure --target=${TARGET} \
@@ -184,9 +254,10 @@ if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then
                       --with-gnu-ld \
                       --disable-nls \
                       --disable-werror \
+		      --with-system-zlib \
 		      ${GCCFLAGS}
     log "Building ${GCC}-boot"
-    make ${PARALLEL} all-gcc
+    make ${MAKEFLAGS} all-gcc
     install ${GCC}-boot install-gcc
     cd ..
     log "Cleaning up ${GCC}-boot"
@@ -195,8 +266,7 @@ if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then
 fi
 
 if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then
-    log "Unpacking ${NEWLIB}"
-    unpack ${SOURCES}/${NEWLIB}.tar.gz
+    unpack ${NEWLIB}
     cd build
     log "Configuring ${NEWLIB}"
     ../${NEWLIB}/configure --target=${TARGET} \
@@ -209,7 +279,7 @@ if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then
                          --disable-werror \
                          --disable-newlib-supplied-syscalls
     log "Building ${NEWLIB}"
-    make ${PARALLEL}
+    make ${MAKEFLAGS}
     install ${NEWLIB} install
     cd ..
     log "Cleaning up ${NEWLIB}"
@@ -219,8 +289,7 @@ fi
 
 # Yes, you need to build gcc again!
 if [ ! -e ${STAMPS}/${GCC}.build ]; then
-    log "Unpacking ${GCC}"
-    unpack ${SOURCES}/${GCC}.tar.bz2
+    unpack ${GCC}
     cd build
     log "Configuring ${GCC}"
     ../${GCC}/configure --target=${TARGET} \
@@ -234,9 +303,10 @@ if [ ! -e ${STAMPS}/${GCC}.build ]; then
                       --with-gnu-ld \
 		      --disable-nls \
                       --disable-werror \
+                      --with-system-zlib \
 	 	     ${GCCFLAGS}
     log "Building ${GCC}"
-    make ${PARALLEL}
+    make ${MAKEFLAGS}
     install ${GCC} install
     cd ..
     log "Cleaning up ${GCC}"
@@ -245,8 +315,7 @@ if [ ! -e ${STAMPS}/${GCC}.build ]; then
 fi
 
 if [ ! -e ${STAMPS}/${GDB}.build ]; then
-    log "Unpacking ${GDB}"
-    unpack ${SOURCES}/${GDB}.tar.bz2
+    unpack ${GDB}
     cd build
     log "Configuring ${GDB}"
     ../${GDB}/configure --target=${TARGET} \
@@ -256,7 +325,7 @@ if [ ! -e ${STAMPS}/${GDB}.build ]; then
                       --disable-werror \
 		      ${GDBFLAGS}
     log "Building ${GDB}"
-    make ${PARALLEL}
+    make ${MAKEFLAGS}
     install ${GDB} install
     cd ..
     log "Cleaning up ${GDB}"
@@ -266,8 +335,7 @@ fi
 
 if [ ${LIBSTM32_EN} != 0 ]; then
 if [ ! -e .libcmsis-${LIBCMSIS}.build ]; then
-    log "Unpacking libcmsis-${LIBCMSIS}"
-    unpack ${SOURCES}/libcmsis-${LIBCMSIS}.tar.bz2
+    unpack libcmsis-${LIBCMSIS}
     cd libcmsis-${LIBCMSIS}
     log "Building libcmsis-${LIBCMSIS}"
     make arch_prefix=${TARGET} prefix=${PREFIX}
@@ -279,8 +347,7 @@ if [ ! -e .libcmsis-${LIBCMSIS}.build ]; then
 fi
 
 if [ ! -e .libstm32-${LIBSTM32}.build ]; then
-    log "Unpacking libstm32-${LIBSTM32}"
-    unpack ${SOURCES}/libstm32-${LIBSTM32}.tar.bz2
+    unpack libstm32-${LIBSTM32}
     cd libstm32-${LIBSTM32}
     log "Building libstm32-${LIBSTM32}"
     make arch_prefix=${TARGET} prefix=${PREFIX}
@@ -292,8 +359,7 @@ if [ ! -e .libstm32-${LIBSTM32}.build ]; then
 fi
 
 if [ ! -e .libstm32usb-${LIBSTM32USB}.build ]; then
-    log "Unpacking libstm32usb-${LIBSTM32USB}"
-    unpack ${SOURCES}/libstm32usb-${LIBSTM32USB}.tar.bz2
+    unpack libstm32usb-${LIBSTM32USB}
     cd libstm32usb-${LIBSTM32USB}
     log "Building libstm32usb-${LIBSTM32USB}"
     make arch_prefix=${TARGET} prefix=${PREFIX}
@@ -306,8 +372,7 @@ fi
 fi
 
 if [ $LIBOPENSTM32_EN != 0 ]; then
-    log "Unpacking libopenstm32-${LIBOPENSTM32}"
-    unpack ${SOURCES}/libopenstm32-${LIBOPENSTM32}.tar.bz2
+    unpack libopenstm32-${LIBOPENSTM32}
     cd libopenstm32-${LIBOPENSTM32}
     log "Building libopenstm32-${LIBOPENSTM32}"
     make PREFIX=${TARGET} DESTDIR=${PREFIX}