X-Git-Url: https://git.gag.com/?p=fw%2Fcortex-toolchain;a=blobdiff_plain;f=summon-arm-toolchain;h=03d5d4833dfa38a7bae451adad25e647bffed2f3;hp=222f4fe1e7fe479181fc96bab29fc4aac5b7eb19;hb=b7a46ec0d9f6a59b4d461aeddbb1b4984e56cd14;hpb=c9917c6f3167b3f6174b93a057101a5213310039

diff --git a/summon-arm-toolchain b/summon-arm-toolchain
index 222f4fe..03d5d48 100755
--- a/summon-arm-toolchain
+++ b/summon-arm-toolchain
@@ -8,6 +8,8 @@
 # apt-get install flex bison libgmp3-dev libmpfr-dev libncurses5-dev \
 # libmpc-dev autoconf texinfo build-essential
 #
+# Or on Ubuntu Maverick give `apt-get build-dep gcc-4.5` a try.
+#
 
 # Stop if any command fails
 set -e
@@ -16,6 +18,10 @@ TARGET=arm-none-eabi		# Or: TARGET=arm-elf
 PREFIX=${HOME}/arm-none-eabi	# Install location of your final toolchain
 PARALLEL=			# Or: PARALLEL="-j 5" for 4 CPUs
 DARWIN_OPT_PATH=/opt/local	# Path in which MacPorts or Fink is installed
+# Set to 'sudo' if you need superuser privileges while installing
+SUDO=
+# Set to 1 to be quieter while running
+QUIET=0
 
 # For FSF GCC:
 GCCVERSION=4.5.1
@@ -37,13 +43,6 @@ LIBOPENSTM32=master
 LIBSTM32_EN=0
 LIBOPENSTM32_EN=0
 
-SUDO=
-SUMMON_DIR=$(pwd)
-SOURCES=${SUMMON_DIR}/sources
-STAMPS=${SUMMON_DIR}/stamps
-
-export PATH="${PREFIX}/bin:${PATH}"
-
 GCCFLAGS=
 GDBFLAGS=
 BINUTILFLAGS=
@@ -51,10 +50,29 @@ BINUTILFLAGS=
 # To default to the Cortex-M3:
 # GCCFLAGS="--with-arch=armv7-m --with-mode=thumb"
 
+# Pull in the local configuration, if any
+if [ -f local.sh ]; then
+    . ./local.sh
+fi
+
+MAKEFLAGS=${PARALLEL}
+TARFLAGS=v
+
+if [ ${QUIET} != 0 ]; then
+    TARFLAGS=
+    MAKEFLAGS="${MAKEFLAGS} -s"
+fi
+
+export PATH="${PREFIX}/bin:${PATH}"
+
+SUMMON_DIR=$(pwd)
+SOURCES=${SUMMON_DIR}/sources
+STAMPS=${SUMMON_DIR}/stamps
+
 # Fetch a versioned file from a URL
 function fetch {
     if [ ! -e ${STAMPS}/$1.fetch ]; then
-        echo "Downloading $1 sources..."
+        log "Downloading $1 sources..."
         wget -c --no-passive-ftp $2
         touch ${STAMPS}/$1.fetch
     fi
@@ -71,13 +89,13 @@ function log {
 function unpack {
     log Unpacking $*
     # Use 'auto' mode decompression.  Replace with a switch if tar doesn't support -a
-    tar xvaf ${SOURCES}/$1.tar.*
+    tar xaf${TARFLAGS} ${SOURCES}/$1.tar.*
 }
 
 # Install a build
 function install {
     log $1
-    ${SUDO} make ${PARALLEL} $2 $3 $4 $5 $6 $7 $8
+    ${SUDO} make ${MAKEFLAGS} $2 $3 $4 $5 $6 $7 $8
 }
 
 case "$(uname)" in
@@ -109,7 +127,7 @@ fetch ${GDB} http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2
 
 if [ ${LIBSTM32_EN} != 0 ]; then
 if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then
-	echo "Cloning libcmsis sources..."
+	log "Cloning libcmsis sources..."
 	git clone git://git.open-bldc.org/libcmsis.git
         cd libcmsis
         git archive --format=tar --prefix=libcmsis-${LIBCMSIS}/ ${LIBCMSIS} | \
@@ -119,7 +137,7 @@ if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then
 fi
 
 if [ ! -e libstm32-${LIBSTM32}.tar.bz2 ]; then
-	echo "Cloning libstm32 sources..."
+	log "Cloning libstm32 sources..."
 	git clone git://git.open-bldc.org/libstm32.git
         cd libstm32
         git archive --format=tar --prefix=libstm32-${LIBSTM32}/ ${LIBSTM32} | \
@@ -129,7 +147,7 @@ if [ ! -e libstm32-${LIBSTM32}.tar.bz2 ]; then
 fi
 
 if [ ! -e libstm32usb-${LIBSTM32USB}.tar.bz2 ]; then
-	echo "Cloning libstm32usb sources..."
+	log "Cloning libstm32usb sources..."
 	git clone git://git.open-bldc.org/libstm32usb.git
         cd libstm32usb
         git archive --format=tar --prefix=libstm32usb-${LIBSTM32USB}/ ${LIBSTM32USB} | \
@@ -141,7 +159,7 @@ fi
 
 if [ ${LIBOPENSTM32_EN} != 0 ]; then
 if [ ! -e libopenstm32-${LIBOPENSTM32}.tar.bz2 ]; then
-	echo "Cloning libopenstm32 sources..."
+	log "Cloning libopenstm32 sources..."
 	git clone git://libopenstm32.git.sourceforge.net/gitroot/libopenstm32/libopenstm32
         cd libopenstm32
         git archive --format=tar --prefix=libopenstm32-${LIBOPENSTM32}/ ${LIBOPENSTM32} | \
@@ -171,7 +189,7 @@ if [ ! -e ${STAMPS}/${BINUTILS}.build ]; then
                            --disable-werror \
 			   ${BINUTILFLAGS}
     log "Building ${BINUTILS}"
-    make ${PARALLEL}
+    make ${MAKEFLAGS}
     install ${BINUTILS} install
     cd ..
     log "Cleaning up ${BINUTILS}"
@@ -197,7 +215,7 @@ if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then
                       --disable-werror \
 		      ${GCCFLAGS}
     log "Building ${GCC}-boot"
-    make ${PARALLEL} all-gcc
+    make ${MAKEFLAGS} all-gcc
     install ${GCC}-boot install-gcc
     cd ..
     log "Cleaning up ${GCC}-boot"
@@ -219,7 +237,7 @@ if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then
                          --disable-werror \
                          --disable-newlib-supplied-syscalls
     log "Building ${NEWLIB}"
-    make ${PARALLEL}
+    make ${MAKEFLAGS}
     install ${NEWLIB} install
     cd ..
     log "Cleaning up ${NEWLIB}"
@@ -245,7 +263,7 @@ if [ ! -e ${STAMPS}/${GCC}.build ]; then
                       --disable-werror \
 	 	     ${GCCFLAGS}
     log "Building ${GCC}"
-    make ${PARALLEL}
+    make ${MAKEFLAGS}
     install ${GCC} install
     cd ..
     log "Cleaning up ${GCC}"
@@ -264,7 +282,7 @@ if [ ! -e ${STAMPS}/${GDB}.build ]; then
                       --disable-werror \
 		      ${GDBFLAGS}
     log "Building ${GDB}"
-    make ${PARALLEL}
+    make ${MAKEFLAGS}
     install ${GDB} install
     cd ..
     log "Cleaning up ${GDB}"