Should fix the problem with hanging CFLAGS and LDFLAGS of OOCD.

[fw/cortex-toolchain] / summon-arm-toolchain

diff --git a/summon-arm-toolchain b/summon-arm-toolchain
index 8663c07ee5debe89027e3005b57f0cfad86b6fe4..ff196e89640564fdc921d86fc8930f28d12570cd 100755 (executable)
--- a/summon-arm-toolchain
+++ b/summon-arm-toolchain
@@ -20,18 +20,19 @@ set -e
 ##############################################################################
 TARGET=arm-none-eabi           # Or: TARGET=arm-elf
 PREFIX=${HOME}/sat     # Install location of your final toolchain
-PARALLEL=                      # Or: PARALLEL="-j 5" for 4 CPUs
 DARWIN_OPT_PATH=/opt/local     # Path in which MacPorts or Fink is installed
 # Set to 'sudo' if you need superuser privileges while installing
 SUDO=
 # Set to 1 to be quieter while running
 QUIET=0
 # Set to 1 to use linaro gcc instead of the FSF gcc
-USE_LINARO=0
+USE_LINARO=1
+# Set to 1 to enable building of OpenOCD
+OOCD_EN=1
 # Set to 1 to build libstm32 provided by ST
 LIBSTM32_EN=0
 # Set to 1 to build libopenstm32 an open source library for stm32
-LIBOPENSTM32_EN=0
+LIBOPENSTM32_EN=1
 # Make the gcc default to Cortex-M3
 DEFAULT_TO_CORTEX_M3=0
 
@@ -45,14 +46,16 @@ if [ ${USE_LINARO} == 0 ] ; then
        GCCURL=http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.gz
 else
        # For the Linaro GCC:
-       GCCVERSION=4.5-2010.08-1
+       GCCRELEASE=4.5-2010.11-0
+       GCCVERSION=4.5-2010.11-1
        GCC=gcc-linaro-${GCCVERSION}
-       GCCURL=http://launchpad.net/gcc-linaro/4.5/${GCCVERSION}/+download/${GCC}.tar.gz
+       GCCURL=http://launchpad.net/gcc-linaro/4.5/${GCCRELEASE}/+download/${GCC}.tar.bz2
 fi
 
 BINUTILS=binutils-2.20
 NEWLIB=newlib-1.18.0
 GDB=gdb-7.2
+OOCD=master
 LIBCMSIS=v1.10-2
 LIBSTM32=v3.0.0-1
 LIBSTM32USB=v3.0.1-1
@@ -62,6 +65,14 @@ LIBOPENSTM32=master
 # Flags section
 ##############################################################################
 
+if which getconf > /dev/null; then
+       CPUS=$(getconf _NPROCESSORS_ONLN)
+else
+       CPUS=1
+fi
+PARALLEL=-j$((CPUS + 1))
+echo "${CPUS} cpu's detected running make with '${PARALLEL}' flag"
+
 GDBFLAGS=
 BINUTILFLAGS=
 
@@ -113,6 +124,11 @@ case "$(uname)" in
                  --with-mpfr=${DARWIN_OPT_PATH} \
                  --with-mpc=${DARWIN_OPT_PATH} \
                  -with-libiconv-prefix=${DARWIN_OPT_PATH}"
+       OOCD_CFLAGS="-m32 -I/opt/mine/include -I/opt/local/include"
+       OOCD_LDFLAGS="-L/opt/mine/lib -L/opt/local/lib"
+       ;;
+       CYGWIN*)
+       echo "Found CygWin that means Windows most likely."
        ;;
        *)
        echo "Found unknown OS. Aborting!"
@@ -180,6 +196,20 @@ fetch ${GCC} ${GCCURL}
 fetch ${NEWLIB} ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz
 fetch ${GDB} http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2
 
+if [ ${OOCD_EN} != 0 ]; then
+if [ ! -e openocd-${OOCD}.tar.bz2 ]; then
+       log "Cloning OpenOCD sources..."
+       git clone git://openocd.git.sourceforge.net/gitroot/openocd/openocd openocd-${OOCD}
+        cd openocd-${OOCD}
+       ./bootstrap
+       cd ..
+       tar cfvj openocd-${OOCD}.tar.bz2 openocd-${OOCD}
+        #git archive --format=tar --prefix=openocd-${OOCD}/ ${OOCD} | \
+        #    bzip2 --stdout > ../openocd-${OOCD}.tar.bz2
+        rm -rf openocd-${OOCD}
+fi
+fi
+
 if [ ${LIBSTM32_EN} != 0 ]; then
 if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then
        log "Cloning libcmsis sources..."
@@ -348,6 +378,41 @@ if [ ! -e ${STAMPS}/${GDB}.build ]; then
     rm -rf build/* ${GDB}
 fi
 
+if [ ${OOCD_EN} != 0 ]; then
+if [ ! -e ${STAMPS}/openocd-${OOCD}.build ]; then
+    unpack openocd-${OOCD}
+    cd build
+    log "Configuring openocd-${OOCD}"
+    CFLAGS="${CFLAGS} ${OOCD_CFLAGS}" \
+    LDFLAGS="${LDFLAGS} ${OOCD_LDFLAGS}" \
+    ../openocd-${OOCD}/configure --enable-maintainer-mode \
+                      --prefix=${PREFIX} \
+                      --enable-dummy \
+                     --enable-parport \
+                     --enable-ft2232_libftdi \
+                     --enable-usb_blaster_libftdi \
+                     --enable-amtjtagaccel \
+                     --enable-zy1000 \
+                     --enable-ep93xx \
+                     --enable-at91rm9200 \
+                     --enable-gw16012 \
+                     --enable-presto_libftdi \
+                     --enable-usbprog \
+                     --enable-jlink \
+                     --enable-vsllink \
+                     --enable-rlink \
+                     --enable-arm-jtag-ew \
+                     --enable-buspirate
+    log "Building openocd-${OOCD}"
+    make ${MAKEFLAGS}
+    install openocd-${OOCD} install
+    cd ..
+    log "Cleaning up openocd-${OOCD}"
+    touch ${STAMPS}/openocd-${OOCD}.build
+    rm -rf build/* ${OOCD}
+fi
+fi
+
 if [ ${LIBSTM32_EN} != 0 ]; then
 if [ ! -e ${STAMPS}/libcmsis-${LIBCMSIS}.build ]; then
     unpack libcmsis-${LIBCMSIS}