-#!/bin/sh
+#!/bin/bash
# Written by Uwe Hermann <uwe@hermann-uwe.de>, released as public domain.
-# Modified by Piot Esden-Tempski <piotr@esden.net>, released as public domain.
+# Modified by Piot
r Esden-Tempski <piotr@esden.net>, released as public domain.
-TARGET=arm-none-eabi # Or: TARGET=arm-none-eabi
-PREFIX=${HOME}/arm-none-eabi # Install location of your final toolchain
-PARALLEL="-j 5" # Or: PARALLEL=""
+#
+# Requirements (example is for Debian, replace package names as needed):
+#
+# apt-get install flex bison libgmp3-dev libmpfr-dev libncurses5-dev \
+# libmpc-dev autoconf texinfo build-essential
+#
+# Or on Ubuntu Maverick give `apt-get build-dep gcc-4.5` a try.
+#
-BINUTILS=binutils-2.19.1
-GCC=gcc-4.4.0
-NEWLIB=newlib-1.17.0
-GDB=gdb-6.8
+# Stop if any command fails
+set -e
+
+##############################################################################
+# Settings section
+# You probably want to customize those
+##############################################################################
+TARGET=arm-none-eabi # Or: TARGET=arm-elf
+PREFIX=${HOME}/sat # Install location of your final toolchain
+DARWIN_OPT_PATH=/opt/local # Path in which MacPorts or Fink is installed
+# Set to 'sudo' if you need superuser privileges while installing
+SUDO=
+# Set to 1 to be quieter while running
+QUIET=0
+# Set to 1 to use linaro gcc instead of the FSF gcc
+USE_LINARO=1
+# Set to 1 to enable building of OpenOCD
+OOCD_EN=1
+# Set to 1 to build libstm32 provided by ST
+LIBSTM32_EN=0
+# Set to 1 to build libopenstm32 an open source library for stm32
+LIBOPENSTM32_EN=1
+# Make the gcc default to Cortex-M3
+DEFAULT_TO_CORTEX_M3=0
+
+##############################################################################
+# Version and download url settings section
+##############################################################################
+if [ ${USE_LINARO} == 0 ] ; then
+ # For FSF GCC:
+ GCCVERSION=4.5.1
+ GCC=gcc-${GCCVERSION}
+ GCCURL=http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.gz
+else
+ # For the Linaro GCC:
+ GCCRELEASE=4.5-2010.11-0
+ GCCVERSION=4.5-2010.11-1
+ GCC=gcc-linaro-${GCCVERSION}
+ GCCURL=http://launchpad.net/gcc-linaro/4.5/${GCCRELEASE}/+download/${GCC}.tar.bz2
+fi
+
+BINUTILS=binutils-2.20
+NEWLIB=newlib-1.18.0
+GDB=gdb-7.2
+OOCD=master
LIBCMSIS=v1.10-2
LIBSTM32=v3.0.0-1
LIBSTM32USB=v3.0.1-1
+LIBOPENSTM32=master
-export PATH="${PREFIX}/bin:${PATH}"
+##############################################################################
+# Flags section
+##############################################################################
-if [ ! -e sources ]; then
- mkdir sources
+if which getconf > /dev/null; then
+ CPUS=$(getconf _NPROCESSORS_ONLN)
+else
+ CPUS=1
fi
+PARALLEL=-j$((CPUS + 1))
+echo "${CPUS} cpu's detected running make with '${PARALLEL}' flag"
+
+GDBFLAGS=
+BINUTILFLAGS=
-cd sources
-if [ ! -e ${BINUTILS}.tar.bz2 ]; then
- echo "Downloading binutils sources..."
- wget -c http://ftp.gnu.org/gnu/binutils/${BINUTILS}.tar.bz2
+if [ ${DEFAULT_TO_CORTEX_M3} == 0 ] ; then
+ GCCFLAGS=
+else
+ # To default to the Cortex-M3:
+ GCCFLAGS="--with-arch=armv7-m --with-mode=thumb --with-float=soft"
fi
-if [ ! -e ${GCC}.tar.bz2 ]; then
- echo "Downloading gcc sources..."
- wget -c ftp://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.bz2
+# Pull in the local configuration, if any
+if [ -f local.sh ]; then
+ . ./local.sh
fi
-if [ ! -e ${NEWLIB}.tar.gz ]; then
- echo "Downloading newlib sources..."
- wget -c ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz
+MAKEFLAGS=${PARALLEL}
+TARFLAGS=v
+
+if [ ${QUIET} != 0 ]; then
+ TARFLAGS=
+ MAKEFLAGS="${MAKEFLAGS} -s"
fi
-if [ ! -e ${GDB}.tar.bz2 ]; then
- echo "Downloading gdb sources..."
- wget -c ftp://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2
+export PATH="${PREFIX}/bin:${PATH}"
+
+SUMMON_DIR=$(pwd)
+SOURCES=${SUMMON_DIR}/sources
+STAMPS=${SUMMON_DIR}/stamps
+
+
+##############################################################################
+# Tool section
+##############################################################################
+TAR=tar
+
+##############################################################################
+# OS and Tooldetection section
+# Detects which tools and flags to use
+##############################################################################
+
+case "$(uname)" in
+ Linux)
+ echo "Found Linux OS."
+ ;;
+ Darwin)
+ echo "Found Darwin OS."
+ GCCFLAGS="${GCCFLAGS} \
+ --with-gmp=${DARWIN_OPT_PATH} \
+ --with-mpfr=${DARWIN_OPT_PATH} \
+ --with-mpc=${DARWIN_OPT_PATH} \
+ -with-libiconv-prefix=${DARWIN_OPT_PATH}"
+ OOCD_CFLAGS="-m32 -I/opt/mine/include -I/opt/local/include"
+ OOCD_LDFLAGS="-L/opt/mine/lib -L/opt/local/lib"
+ ;;
+ CYGWIN*)
+ echo "Found CygWin that means Windows most likely."
+ ;;
+ *)
+ echo "Found unknown OS. Aborting!"
+ exit 1
+ ;;
+esac
+
+##############################################################################
+# Building section
+# You probably don't have to touch anything after this
+##############################################################################
+
+# Fetch a versioned file from a URL
+function fetch {
+ if [ ! -e ${STAMPS}/$1.fetch ]; then
+ log "Downloading $1 sources..."
+ wget -c --no-passive-ftp $2
+ touch ${STAMPS}/$1.fetch
+ fi
+}
+
+# Log a message out to the console
+function log {
+ echo "******************************************************************"
+ echo "* $*"
+ echo "******************************************************************"
+}
+
+# Unpack an archive
+function unpack {
+ log Unpacking $*
+ # Use 'auto' mode decompression. Replace with a switch if tar doesn't support -a
+ ARCHIVE=$(ls ${SOURCES}/$1.tar.*)
+ case ${ARCHIVE} in
+ *.bz2)
+ echo "archive type bz2"
+ TYPE=j
+ ;;
+ *.gz)
+ echo "archive type gz"
+ TYPE=z
+ ;;
+ *)
+ echo "Unknown archive type of $1"
+ echo ${ARCHIVE}
+ exit 1
+ ;;
+ esac
+ ${TAR} xf${TYPE}${TARFLAGS} ${SOURCES}/$1.tar.*
+}
+
+# Install a build
+function install {
+ log $1
+ ${SUDO} make ${MAKEFLAGS} $2 $3 $4 $5 $6 $7 $8
+}
+
+
+mkdir -p ${STAMPS} ${SOURCES}
+
+cd ${SOURCES}
+
+fetch ${BINUTILS} http://ftp.gnu.org/gnu/binutils/${BINUTILS}.tar.bz2
+fetch ${GCC} ${GCCURL}
+fetch ${NEWLIB} ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz
+fetch ${GDB} http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2
+
+if [ ${OOCD_EN} != 0 ]; then
+if [ ! -e openocd-${OOCD}.tar.bz2 ]; then
+ log "Cloning OpenOCD sources..."
+ git clone git://openocd.git.sourceforge.net/gitroot/openocd/openocd openocd-${OOCD}
+ cd openocd-${OOCD}
+ ./bootstrap
+ cd ..
+ tar cfvj openocd-${OOCD}.tar.bz2 openocd-${OOCD}
+ #git archive --format=tar --prefix=openocd-${OOCD}/ ${OOCD} | \
+ # bzip2 --stdout > ../openocd-${OOCD}.tar.bz2
+ rm -rf openocd-${OOCD}
+fi
fi
+if [ ${LIBSTM32_EN} != 0 ]; then
if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then
- echo "Cloning libcmsis sources..."
+ log "Cloning libcmsis sources..."
git clone git://git.open-bldc.org/libcmsis.git
cd libcmsis
git archive --format=tar --prefix=libcmsis-${LIBCMSIS}/ ${LIBCMSIS} | \
fi
if [ ! -e libstm32-${LIBSTM32}.tar.bz2 ]; then
- echo "Cloning libstm32 sources..."
+ log "Cloning libstm32 sources..."
git clone git://git.open-bldc.org/libstm32.git
cd libstm32
git archive --format=tar --prefix=libstm32-${LIBSTM32}/ ${LIBSTM32} | \
fi
if [ ! -e libstm32usb-${LIBSTM32USB}.tar.bz2 ]; then
- echo "Cloning libstm32usb sources..."
+ log "Cloning libstm32usb sources..."
git clone git://git.open-bldc.org/libstm32usb.git
cd libstm32usb
git archive --format=tar --prefix=libstm32usb-${LIBSTM32USB}/ ${LIBSTM32USB} | \
cd ..
rm -rf libstm32usb
fi
+fi
-cd ..
+if [ ${LIBOPENSTM32_EN} != 0 ]; then
+if [ ! -e libopenstm32-${LIBOPENSTM32}.tar.bz2 ]; then
+ log "Cloning libopenstm32 sources..."
+ git clone git://libopenstm32.git.sourceforge.net/gitroot/libopenstm32/libopenstm32
+ cd libopenstm32
+ git archive --format=tar --prefix=libopenstm32-${LIBOPENSTM32}/ ${LIBOPENSTM32} | \
+ bzip2 --stdout > ../libopenstm32-${LIBOPENSTM32}.tar.bz2
+ cd ..
+ rm -rf libopenstm32
+fi
+fi
+
+cd ${SUMMON_DIR}
if [ ! -e build ]; then
mkdir build
fi
-if [ ! -e .${BINUTILS}.build ]; then
- echo "******************************************************************"
- echo "* Unpacking ${BINUTILS}"
- echo "******************************************************************"
- tar xfvj sources/${BINUTILS}.tar.bz2
+if [ ! -e ${STAMPS}/${BINUTILS}.build ]; then
+ unpack ${BINUTILS}
cd build
- echo "******************************************************************"
- echo "* Configuring ${BINUTILS}"
- echo "******************************************************************"
+ log "Configuring ${BINUTILS}"
../${BINUTILS}/configure --target=${TARGET} \
--prefix=${PREFIX} \
--enable-interwork \
--enable-multilib \
--with-gnu-as \
--with-gnu-ld \
- --disable-nls || exit
- echo "******************************************************************"
- echo "* Building ${BINUTILS}"
- echo "******************************************************************"
- make ${PARALLEL} || exit
- echo "******************************************************************"
- echo "* Installing ${BINUTILS}"
- echo "******************************************************************"
- make install || exit
+ --disable-nls \
+ --disable-werror \
+ ${BINUTILFLAGS}
+ log "Building ${BINUTILS}"
+ make ${MAKEFLAGS}
+ install ${BINUTILS} install
cd ..
- echo "******************************************************************"
- echo "* Cleaning up ${BINUTILS}"
- echo "******************************************************************"
- touch .${BINUTILS}.build
+ log "Cleaning up ${BINUTILS}"
+ touch ${STAMPS}/${BINUTILS}.build
rm -rf build/* ${BINUTILS}
fi
-if [ ! -e .${GCC}-boot.build ]; then
- echo "******************************************************************"
- echo "* Unpacking ${GCC}-boot"
- echo "******************************************************************"
- tar xfvj sources/${GCC}.tar.bz2
+if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then
+ unpack ${GCC} boot
cd build
- echo "******************************************************************"
- echo "* Configuring ${GCC}-boot"
- echo "******************************************************************"
+ log "Configuring ${GCC}-boot"
../${GCC}/configure --target=${TARGET} \
--prefix=${PREFIX} \
--enable-interwork \
--disable-shared \
--with-gnu-as \
--with-gnu-ld \
- --disable-nls || exit
- echo "******************************************************************"
- echo "* Building ${GCC}-boot"
- echo "******************************************************************"
- make ${PARALLEL} all-gcc || exit
- echo "******************************************************************"
- echo "* Installing ${GCC}-boot"
- echo "******************************************************************"
- make install-gcc || exit
+ --disable-nls \
+ --disable-werror \
+ --with-system-zlib \
+ ${GCCFLAGS}
+ log "Building ${GCC}-boot"
+ make ${MAKEFLAGS} all-gcc
+ install ${GCC}-boot install-gcc
cd ..
- echo "******************************************************************"
- echo "* Cleaning up ${GCC}-boot"
- echo "******************************************************************"
- touch .${GCC}-boot.build
+ log "Cleaning up ${GCC}-boot"
+ touch ${STAMPS}/${GCC}-boot.build
rm -rf build/* ${GCC}
fi
-if [ ! -e .${NEWLIB}.build ]; then
- echo "******************************************************************"
- echo "* Unpacking ${NEWLIB}"
- echo "******************************************************************"
- tar xfvz sources/${NEWLIB}.tar.gz
+if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then
+ unpack ${NEWLIB}
cd build
- echo "******************************************************************"
- echo "* Configuring ${NEWLIB}"
- echo "******************************************************************"
+ log "Configuring ${NEWLIB}"
../${NEWLIB}/configure --target=${TARGET} \
--prefix=${PREFIX} \
--enable-interwork \
--with-gnu-as \
--with-gnu-ld \
--disable-nls \
- --disable-newlib-supplied-syscalls || exit
- echo "******************************************************************"
- echo "* Building ${NEWLIB}"
- echo "******************************************************************"
- make ${PARALLEL} || exit
- echo "******************************************************************"
- echo "* Installing ${NEWLIB}"
- echo "******************************************************************"
- make install || exit
+ --disable-werror \
+ --disable-newlib-supplied-syscalls \
+ --with-float=soft
+ log "Building ${NEWLIB}"
+ make ${MAKEFLAGS} CFLAGS_FOR_TARGET="-msoft-float" CCASFLAGS="-msoft-float"
+ install ${NEWLIB} install
cd ..
- echo "******************************************************************"
- echo "* Cleaning up ${NEWLIB}"
- echo "******************************************************************"
- touch .${NEWLIB}.build
+ log "Cleaning up ${NEWLIB}"
+ touch ${STAMPS}/${NEWLIB}.build
rm -rf build/* ${NEWLIB}
fi
# Yes, you need to build gcc again!
-if [ ! -e .${GCC}.build ]; then
- echo "******************************************************************"
- echo "* Unpacking ${GCC}"
- echo "******************************************************************"
- tar xfvj sources/${GCC}.tar.bz2
+if [ ! -e ${STAMPS}/${GCC}.build ]; then
+ unpack ${GCC}
cd build
- echo "******************************************************************"
- echo "* Configuring ${GCC}"
- echo "******************************************************************"
+ log "Configuring ${GCC}"
../${GCC}/configure --target=${TARGET} \
--prefix=${PREFIX} \
--enable-interwork \
--disable-shared \
--with-gnu-as \
--with-gnu-ld \
- --disable-nls || exit
- echo "******************************************************************"
- echo "* Building ${GCC}"
- echo "******************************************************************"
- make ${PARALLEL} || exit
- echo "******************************************************************"
- echo "* Installing ${GCC}"
- echo "******************************************************************"
- make install || exit
+ --disable-nls \
+ --disable-werror \
+ --with-system-zlib \
+ ${GCCFLAGS}
+ log "Building ${GCC}"
+ make ${MAKEFLAGS}
+ install ${GCC} install
cd ..
- echo "******************************************************************"
- echo "* Cleaning up ${GCC}"
- echo "******************************************************************"
- touch .${GCC}.build
+ log "Cleaning up ${GCC}"
+ touch ${STAMPS}/${GCC}.build
rm -rf build/* ${GCC}
fi
-if [ ! -e .${GDB}.build ]; then
- echo "******************************************************************"
- echo "* Unpacking ${GDB}"
- echo "******************************************************************"
- tar xfvj sources/${GDB}.tar.bz2
+if [ ! -e ${STAMPS}/${GDB}.build ]; then
+ unpack ${GDB}
cd build
- echo "******************************************************************"
- echo "* Configuring ${GDB}"
- echo "******************************************************************"
+ log "Configuring ${GDB}"
../${GDB}/configure --target=${TARGET} \
--prefix=${PREFIX} \
--enable-interwork \
- --enable-multilib || exit
- echo "******************************************************************"
- echo "* Building ${GDB}"
- echo "******************************************************************"
- make ${PARALLEL} || exit
- echo "******************************************************************"
- echo "* Installing ${GDB}"
- echo "******************************************************************"
- make install || exit
+ --enable-multilib \
+ --disable-werror \
+ ${GDBFLAGS}
+ log "Building ${GDB}"
+ make ${MAKEFLAGS}
+ install ${GDB} install
cd ..
- echo "******************************************************************"
- echo "* Cleaning up ${GDB}"
- echo "******************************************************************"
- touch .${GDB}.build
+ log "Cleaning up ${GDB}"
+ touch ${STAMPS}/${GDB}.build
rm -rf build/* ${GDB}
fi
-if [ ! -e .libcmsis-${LIBCMSIS}.build ]; then
- echo "******************************************************************"
- echo "* Unpacking libcmsis-${LIBCMSIS}"
- echo "******************************************************************"
- tar xfvj sources/libcmsis-${LIBCMSIS}.tar.bz2
+if [ ${OOCD_EN} != 0 ]; then
+if [ ! -e ${STAMPS}/openocd-${OOCD}.build ]; then
+ unpack openocd-${OOCD}
+ cd build
+ log "Configuring openocd-${OOCD}"
+ CFLAGS="${CFLAGS} ${OOCD_CFLAGS}" \
+ LDFLAGS="${LDFLAGS} ${OOCD_LDFLAGS}" \
+ ../openocd-${OOCD}/configure --enable-maintainer-mode \
+ --prefix=${PREFIX} \
+ --enable-dummy \
+ --enable-parport \
+ --enable-ft2232_libftdi \
+ --enable-usb_blaster_libftdi \
+ --enable-amtjtagaccel \
+ --enable-zy1000 \
+ --enable-ep93xx \
+ --enable-at91rm9200 \
+ --enable-gw16012 \
+ --enable-presto_libftdi \
+ --enable-usbprog \
+ --enable-jlink \
+ --enable-vsllink \
+ --enable-rlink \
+ --enable-arm-jtag-ew \
+ --enable-buspirate
+ log "Building openocd-${OOCD}"
+ make ${MAKEFLAGS}
+ install openocd-${OOCD} install
+ cd ..
+ log "Cleaning up openocd-${OOCD}"
+ touch ${STAMPS}/openocd-${OOCD}.build
+ rm -rf build/* ${OOCD}
+fi
+fi
+
+if [ ${LIBSTM32_EN} != 0 ]; then
+if [ ! -e ${STAMPS}/libcmsis-${LIBCMSIS}.build ]; then
+ unpack libcmsis-${LIBCMSIS}
cd libcmsis-${LIBCMSIS}
- echo "******************************************************************"
- echo "* Building libcmsis-${LIBCMSIS}"
- echo "******************************************************************"
- make arch_prefix=${TARGET} prefix=${PREFIX} || exit
- echo "******************************************************************"
- echo "* Installing libcmsis-${LIBCMSIS}"
- echo "******************************************************************"
- make arch_prefix=${TARGET} prefix=${PREFIX} install || exit
+ log "Building libcmsis-${LIBCMSIS}"
+ make arch_prefix=${TARGET} prefix=${PREFIX}
+ install libcmsis-${LIBCMSIS} arch_prefix=${TARGET} prefix=${PREFIX} install
cd ..
- echo "******************************************************************"
- echo "* Cleaning up libcmsis-${LIBCMSIS}"
- echo "******************************************************************"
- touch .libcmsis-${LIBCMSIS}.build
+ log "Cleaning up libcmsis-${LIBCMSIS}"
+ touch ${STAMPS}/libcmsis-${LIBCMSIS}.build
rm -rf libcmsis-${LIBCMSIS}
fi
-if [ ! -e .libstm32-${LIBSTM32}.build ]; then
- echo "******************************************************************"
- echo "* Unpacking libstm32-${LIBSTM32}"
- echo "******************************************************************"
- tar xfvj sources/libstm32-${LIBSTM32}.tar.bz2
+if [ ! -e ${STAMPS}/libstm32-${LIBSTM32}.build ]; then
+ unpack libstm32-${LIBSTM32}
cd libstm32-${LIBSTM32}
- echo "******************************************************************"
- echo "* Building libstm32-${LIBSTM32}"
- echo "******************************************************************"
- make arch_prefix=${TARGET} prefix=${PREFIX} || exit
- echo "******************************************************************"
- echo "* Installing libstm32-${LIBSTM32}"
- echo "******************************************************************"
- make arch_prefix=${TARGET} prefix=${PREFIX} install || exit
+ log "Building libstm32-${LIBSTM32}"
+ make arch_prefix=${TARGET} prefix=${PREFIX}
+ install libstm32-${LIBSTM32} arch_prefix=${TARGET} prefix=${PREFIX} install
cd ..
- echo "******************************************************************"
- echo "* Cleaning up libstm32-${LIBSTM32}"
- echo "******************************************************************"
- touch .libstm32-${LIBSTM32}.build
+ log "Cleaning up libstm32-${LIBSTM32}"
+ touch ${STAMPS}/libstm32-${LIBSTM32}.build
rm -rf libstm32-${LIBSTM32}
fi
-if [ ! -e .libstm32usb-${LIBSTM32USB}.build ]; then
- echo "******************************************************************"
- echo "* Unpacking libstm32usb-${LIBSTM32USB}"
- echo "******************************************************************"
- tar xfvj sources/libstm32usb-${LIBSTM32USB}.tar.bz2
+if [ ! -e ${STAMPS}/libstm32usb-${LIBSTM32USB}.build ]; then
+ unpack libstm32usb-${LIBSTM32USB}
cd libstm32usb-${LIBSTM32USB}
- echo "******************************************************************"
- echo "* Building libstm32usb-${LIBSTM32USB}"
- echo "******************************************************************"
- make arch_prefix=${TARGET} prefix=${PREFIX} || exit
- echo "******************************************************************"
- echo "* Installing libstm32usb-${LIBSTM32USB}"
- echo "******************************************************************"
- make arch_prefix=${TARGET} prefix=${PREFIX} install || exit
+ log "Building libstm32usb-${LIBSTM32USB}"
+ make arch_prefix=${TARGET} prefix=${PREFIX}
+ install libstm32usb-${LIBSTM32USB} arch_prefix=${TARGET} prefix=${PREFIX} install
cd ..
- echo "******************************************************************"
- echo "* Cleaning up libstm32usb-${LIBSTM32USB}"
- echo "******************************************************************"
- touch .libstm32usb-${LIBSTM32USB}.build
+ log "Cleaning up libstm32usb-${LIBSTM32USB}"
+ touch ${STAMPS}/libstm32usb-${LIBSTM32USB}.build
rm -rf libstm32usb-${LIBSTM32USB}
fi
+fi
+
+if [ $LIBOPENSTM32_EN != 0 ]; then
+if [ ! -e ${STAMPS}/libopenstm32-${LIBOPENSTM32}.build ]; then
+ unpack libopenstm32-${LIBOPENSTM32}
+ cd libopenstm32-${LIBOPENSTM32}
+ log "Building libopenstm32-${LIBOPENSTM32}"
+ make PREFIX=${TARGET} DESTDIR=${PREFIX}
+ install libopenstm32-${LIBOPENSTM32} PREFIX=${TARGET} DESTDIR=${PREFIX} install
+ cd ..
+ log "Cleaning up libopenstm32-${LIBOPENSTM32}"
+ touch ${STAMPS}/libopenstm32-${LIBOPENSTM32}.build
+ rm -rf libopenstm32-${LIBOPENSTM32}
+fi
+fi
projects / fw / cortex-toolchain / blobdiff