PARALLEL flag is now being set automatically based on available host cpu's.

[fw/cortex-toolchain] / summon-arm-toolchain

diff --git a/summon-arm-toolchain b/summon-arm-toolchain
index 0d6385d3761f456d32b94bd5796af9965f2b88f7..fe9e58ad4049f248c2e9b743ff79f943efdd2704 100755 (executable)
--- a/summon-arm-toolchain
+++ b/summon-arm-toolchain
@@ -20,7 +20,6 @@ set -e
 ##############################################################################
 TARGET=arm-none-eabi           # Or: TARGET=arm-elf
 PREFIX=${HOME}/sat     # Install location of your final toolchain
 ##############################################################################
 TARGET=arm-none-eabi           # Or: TARGET=arm-elf
 PREFIX=${HOME}/sat     # Install location of your final toolchain

-PARALLEL=                      # Or: PARALLEL="-j 5" for 4 CPUs

 DARWIN_OPT_PATH=/opt/local     # Path in which MacPorts or Fink is installed
 # Set to 'sudo' if you need superuser privileges while installing
 SUDO=
 DARWIN_OPT_PATH=/opt/local     # Path in which MacPorts or Fink is installed
 # Set to 'sudo' if you need superuser privileges while installing
 SUDO=


@@ -62,6 +61,10 @@ LIBOPENSTM32=master
 # Flags section
 ##############################################################################
 
 # Flags section
 ##############################################################################
 

+CPUS=$(getconf _NPROCESSORS_ONLN)
+PARALLEL=-j$((CPUS + 1))
+echo "${CPUS} cpu's detected running make with '${PARALLEL}' flag"
+

 GDBFLAGS=
 BINUTILFLAGS=
 
 GDBFLAGS=
 BINUTILFLAGS=
 


@@ -69,7 +72,7 @@ if [ ${DEFAULT_TO_CORTEX_M3} == 0 ] ; then
        GCCFLAGS=
 else
        # To default to the Cortex-M3:
        GCCFLAGS=
 else
        # To default to the Cortex-M3:

-       GCCFLAGS="--with-arch=armv7-m --with-mode=thumb"
+       GCCFLAGS="--with-arch=armv7-m --with-mode=thumb --with-float=soft"

 fi
 
 # Pull in the local configuration, if any
 fi
 
 # Pull in the local configuration, if any


@@ -91,15 +94,20 @@ SUMMON_DIR=$(pwd)
 SOURCES=${SUMMON_DIR}/sources
 STAMPS=${SUMMON_DIR}/stamps
 
 SOURCES=${SUMMON_DIR}/sources
 STAMPS=${SUMMON_DIR}/stamps
 

+
+##############################################################################
+# Tool section
+##############################################################################
+TAR=tar
+

 ##############################################################################
 # OS and Tooldetection section
 ##############################################################################
 # OS and Tooldetection section

-# Detects which tools to use
+# Detects which tools and flags to use

 ##############################################################################
 
 case "$(uname)" in
        Linux)
        echo "Found Linux OS."
 ##############################################################################
 
 case "$(uname)" in
        Linux)
        echo "Found Linux OS."

-       TAR=tar

        ;;
        Darwin)
        echo "Found Darwin OS."
        ;;
        Darwin)
        echo "Found Darwin OS."


@@ -108,13 +116,6 @@ case "$(uname)" in
                  --with-mpfr=${DARWIN_OPT_PATH} \
                  --with-mpc=${DARWIN_OPT_PATH} \
                  -with-libiconv-prefix=${DARWIN_OPT_PATH}"
                  --with-mpfr=${DARWIN_OPT_PATH} \
                  --with-mpc=${DARWIN_OPT_PATH} \
                  -with-libiconv-prefix=${DARWIN_OPT_PATH}"

-        if ! which gnutar > /dev/null ; then
-               echo "ERROR: GNU tar not found! (try 'sudo port install gnutar')"
-               exit 1
-       else
-               echo "GNU tar found!"
-               TAR=gnutar
-       fi

        ;;
        *)
        echo "Found unknown OS. Aborting!"
        ;;
        *)
        echo "Found unknown OS. Aborting!"


@@ -147,7 +148,23 @@ function log {
 function unpack {
     log Unpacking $*
     # Use 'auto' mode decompression.  Replace with a switch if tar doesn't support -a
 function unpack {
     log Unpacking $*
     # Use 'auto' mode decompression.  Replace with a switch if tar doesn't support -a

-    ${TAR} xaf${TARFLAGS} ${SOURCES}/$1.tar.*
+    ARCHIVE=$(ls ${SOURCES}/$1.tar.*)
+    case ${ARCHIVE} in
+       *.bz2)
+           echo "archive type bz2"
+           TYPE=j
+           ;;
+       *.gz)
+           echo "archive type gz"
+           TYPE=z
+           ;;
+       *)
+           echo "Unknown archive type of $1"
+           echo ${ARCHIVE}
+           exit 1
+           ;;
+    esac
+    ${TAR} xf${TYPE}${TARFLAGS} ${SOURCES}/$1.tar.*

 }
 
 # Install a build
 }
 
 # Install a build


@@ -277,9 +294,10 @@ if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then
                          --with-gnu-ld \
                          --disable-nls \
                          --disable-werror \
                          --with-gnu-ld \
                          --disable-nls \
                          --disable-werror \

-                         --disable-newlib-supplied-syscalls
+                         --disable-newlib-supplied-syscalls \
+                        --with-float=soft

     log "Building ${NEWLIB}"
     log "Building ${NEWLIB}"

-    make ${MAKEFLAGS}
+    make ${MAKEFLAGS} CFLAGS_FOR_TARGET="-msoft-float" CCASFLAGS="-msoft-float"

     install ${NEWLIB} install
     cd ..
     log "Cleaning up ${NEWLIB}"
     install ${NEWLIB} install
     cd ..
     log "Cleaning up ${NEWLIB}"


@@ -334,7 +352,7 @@ if [ ! -e ${STAMPS}/${GDB}.build ]; then
 fi
 
 if [ ${LIBSTM32_EN} != 0 ]; then
 fi
 
 if [ ${LIBSTM32_EN} != 0 ]; then

-if [ ! -e .libcmsis-${LIBCMSIS}.build ]; then
+if [ ! -e ${STAMPS}/libcmsis-${LIBCMSIS}.build ]; then

     unpack libcmsis-${LIBCMSIS}
     cd libcmsis-${LIBCMSIS}
     log "Building libcmsis-${LIBCMSIS}"
     unpack libcmsis-${LIBCMSIS}
     cd libcmsis-${LIBCMSIS}
     log "Building libcmsis-${LIBCMSIS}"


@@ -342,11 +360,11 @@ if [ ! -e .libcmsis-${LIBCMSIS}.build ]; then
     install libcmsis-${LIBCMSIS} arch_prefix=${TARGET} prefix=${PREFIX} install
     cd ..
     log "Cleaning up libcmsis-${LIBCMSIS}"
     install libcmsis-${LIBCMSIS} arch_prefix=${TARGET} prefix=${PREFIX} install
     cd ..
     log "Cleaning up libcmsis-${LIBCMSIS}"

-    touch .libcmsis-${LIBCMSIS}.build
+    touch ${STAMPS}/libcmsis-${LIBCMSIS}.build

     rm -rf libcmsis-${LIBCMSIS}
 fi
 
     rm -rf libcmsis-${LIBCMSIS}
 fi
 

-if [ ! -e .libstm32-${LIBSTM32}.build ]; then
+if [ ! -e ${STAMPS}/libstm32-${LIBSTM32}.build ]; then

     unpack libstm32-${LIBSTM32}
     cd libstm32-${LIBSTM32}
     log "Building libstm32-${LIBSTM32}"
     unpack libstm32-${LIBSTM32}
     cd libstm32-${LIBSTM32}
     log "Building libstm32-${LIBSTM32}"


@@ -354,11 +372,11 @@ if [ ! -e .libstm32-${LIBSTM32}.build ]; then
     install libstm32-${LIBSTM32} arch_prefix=${TARGET} prefix=${PREFIX} install
     cd ..
     log "Cleaning up libstm32-${LIBSTM32}"
     install libstm32-${LIBSTM32} arch_prefix=${TARGET} prefix=${PREFIX} install
     cd ..
     log "Cleaning up libstm32-${LIBSTM32}"

-    touch .libstm32-${LIBSTM32}.build
+    touch ${STAMPS}/libstm32-${LIBSTM32}.build

     rm -rf libstm32-${LIBSTM32}
 fi
 
     rm -rf libstm32-${LIBSTM32}
 fi
 

-if [ ! -e .libstm32usb-${LIBSTM32USB}.build ]; then
+if [ ! -e ${STAMPS}/libstm32usb-${LIBSTM32USB}.build ]; then

     unpack libstm32usb-${LIBSTM32USB}
     cd libstm32usb-${LIBSTM32USB}
     log "Building libstm32usb-${LIBSTM32USB}"
     unpack libstm32usb-${LIBSTM32USB}
     cd libstm32usb-${LIBSTM32USB}
     log "Building libstm32usb-${LIBSTM32USB}"


@@ -366,12 +384,13 @@ if [ ! -e .libstm32usb-${LIBSTM32USB}.build ]; then
     install libstm32usb-${LIBSTM32USB} arch_prefix=${TARGET} prefix=${PREFIX} install
     cd ..
     log "Cleaning up libstm32usb-${LIBSTM32USB}"
     install libstm32usb-${LIBSTM32USB} arch_prefix=${TARGET} prefix=${PREFIX} install
     cd ..
     log "Cleaning up libstm32usb-${LIBSTM32USB}"

-    touch .libstm32usb-${LIBSTM32USB}.build
+    touch ${STAMPS}/libstm32usb-${LIBSTM32USB}.build

     rm -rf libstm32usb-${LIBSTM32USB}
 fi
 fi
 
 if [ $LIBOPENSTM32_EN != 0 ]; then
     rm -rf libstm32usb-${LIBSTM32USB}
 fi
 fi
 
 if [ $LIBOPENSTM32_EN != 0 ]; then

+if [ ! -e ${STAMPS}/libopenstm32-${LIBOPENSTM32}.build ]; then

     unpack libopenstm32-${LIBOPENSTM32}
     cd libopenstm32-${LIBOPENSTM32}
     log "Building libopenstm32-${LIBOPENSTM32}"
     unpack libopenstm32-${LIBOPENSTM32}
     cd libopenstm32-${LIBOPENSTM32}
     log "Building libopenstm32-${LIBOPENSTM32}"


@@ -379,6 +398,7 @@ if [ $LIBOPENSTM32_EN != 0 ]; then
     install libopenstm32-${LIBOPENSTM32} PREFIX=${TARGET} DESTDIR=${PREFIX} install
     cd ..
     log "Cleaning up libopenstm32-${LIBOPENSTM32}"
     install libopenstm32-${LIBOPENSTM32} PREFIX=${TARGET} DESTDIR=${PREFIX} install
     cd ..
     log "Cleaning up libopenstm32-${LIBOPENSTM32}"

-    touch .libopenstm32-${LIBOPENSTM32}.build
+    touch ${STAMPS}/libopenstm32-${LIBOPENSTM32}.build

     rm -rf libopenstm32-${LIBOPENSTM32}
 fi
     rm -rf libopenstm32-${LIBOPENSTM32}
 fi

+fi