Update versions to latest released ones.

[fw/cortex-toolchain] / summon-arm-toolchain

diff --git a/summon-arm-toolchain b/summon-arm-toolchain
index 95da9dbc3ab346f07b08fdbcef3ec71e7f26b496..bccf0444fbfdcb6fafcc7fb60e4be69c3720515f 100755 (executable)
--- a/summon-arm-toolchain
+++ b/summon-arm-toolchain
@@ -2,15 +2,22 @@
 # Written by Uwe Hermann <uwe@hermann-uwe.de>, released as public domain.
 # Modified by Piotr Esden-Tempski <piotr@esden.net>, released as public domain.
 
-TARGET=arm-elf                 # Or: TARGET=arm-none-eabi
-PREFIX=${HOME}/arm-elf         # Install location of your final toolchain
-PARALLEL=""                    # Or: PARALLEL="-j 5" for 4 CPU's
+#
+# Requirements (example is for Debian, replace package names as needed):
+#
+# apt-get install flex bison libgmp3-dev libmpfr-dev libncurses5-dev \
+# libmpc-dev autoconf texinfo build-essential
+#
+
+TARGET=arm-none-eabi           # Or: TARGET=arm-elf
+PREFIX=${HOME}/arm-none-eabi   # Install location of your final toolchain
+PARALLEL=""                    # Or: PARALLEL="-j 5" for 4 CPUs
 DARWIN_OPT_PATH=/opt/local     # Path in which MacPorts or Fink is installed
 
-BINUTILS=binutils-2.19.1
-GCC=gcc-4.4.0
-NEWLIB=newlib-1.17.0
-GDB=gdb-6.8
+BINUTILS=binutils-2.20
+GCC=gcc-4.5.1
+NEWLIB=newlib-1.18.0
+GDB=gdb-7.2
 LIBCMSIS=v1.10-2
 LIBSTM32=v3.0.0-1
 LIBSTM32USB=v3.0.1-1
@@ -18,20 +25,24 @@ LIBOPENSTM32=master
 LIBSTM32_EN=0
 LIBOPENSTM32_EN=0
 
+SUMMON_DIR=$(pwd)
+SOURCES=${SUMMON_DIR}/sources
+
 export PATH="${PREFIX}/bin:${PATH}"
 
+GCCFLAGS=
+GDBFLAGS=
+BINUTILFLAGS=
+
 case "$(uname)" in
        Linux)
        echo "Found Linux OS."
-       GCCFLAGS=
-       GDBFLAGS=
        ;;
        Darwin)
        echo "Found Darwin OS."
        GCCFLAGS="--with-gmp=${DARWIN_OPT_PATH} \
                  --with-mpfr=${DARWIN_OPT_PATH} \
                  -with-libiconv-prefix=${DARWIN_OPT_PATH}"
-        GDBFLAGS="--disable-werror"
        ;;
        *)
        echo "Found unknown OS. Aborting!"
@@ -39,23 +50,23 @@ case "$(uname)" in
        ;;
 esac
 
-if [ ! -e sources ]; then
-    mkdir sources
+if [ ! -e ${SOURCES} ]; then
+    mkdir ${SOURCES}
 fi
 
-cd sources
+cd ${SOURCES}
 
 echo "Downloading binutils sources..."
 wget -c http://ftp.gnu.org/gnu/binutils/${BINUTILS}.tar.bz2
 
 echo "Downloading gcc sources..."
-wget -c ftp://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.bz2
+wget -c http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.bz2
 
 echo "Downloading newlib sources..."
-wget -c ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz
+wget -c --no-passive-ftp ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz
 
 echo "Downloading gdb sources..."
-wget -c ftp://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2
+wget -c http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2
 
 if [ ${LIBSTM32_EN} != 0 ]; then
 if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then
@@ -101,7 +112,7 @@ if [ ! -e libopenstm32-${LIBOPENSTM32}.tar.bz2 ]; then
 fi
 fi
 
-cd ..
+cd ${SUMMON_DIR}
 
 if [ ! -e build ]; then
     mkdir build
@@ -111,7 +122,7 @@ if [ ! -e .${BINUTILS}.build ]; then
     echo "******************************************************************"
     echo "* Unpacking ${BINUTILS}"
     echo "******************************************************************"
-    tar xfvj sources/${BINUTILS}.tar.bz2
+    tar xfvj ${SOURCES}/${BINUTILS}.tar.bz2
     cd build
     echo "******************************************************************"
     echo "* Configuring ${BINUTILS}"
@@ -122,7 +133,9 @@ if [ ! -e .${BINUTILS}.build ]; then
                            --enable-multilib \
                            --with-gnu-as \
                            --with-gnu-ld \
-                           --disable-nls || exit
+                           --disable-nls \
+                           --disable-werror \
+                          ${BINUTILFLAGS} || exit
     echo "******************************************************************"
     echo "* Building ${BINUTILS}"
     echo "******************************************************************"
@@ -143,7 +156,7 @@ if [ ! -e .${GCC}-boot.build ]; then
     echo "******************************************************************"
     echo "* Unpacking ${GCC}-boot"
     echo "******************************************************************"
-    tar xfvj sources/${GCC}.tar.bz2
+    tar xfvj ${SOURCES}/${GCC}.tar.bz2
     cd build
     echo "******************************************************************"
     echo "* Configuring ${GCC}-boot"
@@ -159,6 +172,7 @@ if [ ! -e .${GCC}-boot.build ]; then
                       --with-gnu-as \
                       --with-gnu-ld \
                       --disable-nls \
+                      --disable-werror \
                      ${GCCFLAGS} || exit
     echo "******************************************************************"
     echo "* Building ${GCC}-boot"
@@ -180,7 +194,7 @@ if [ ! -e .${NEWLIB}.build ]; then
     echo "******************************************************************"
     echo "* Unpacking ${NEWLIB}"
     echo "******************************************************************"
-    tar xfvz sources/${NEWLIB}.tar.gz
+    tar xfvz ${SOURCES}/${NEWLIB}.tar.gz
     cd build
     echo "******************************************************************"
     echo "* Configuring ${NEWLIB}"
@@ -192,6 +206,7 @@ if [ ! -e .${NEWLIB}.build ]; then
                          --with-gnu-as \
                          --with-gnu-ld \
                          --disable-nls \
+                         --disable-werror \
                          --disable-newlib-supplied-syscalls || exit
     echo "******************************************************************"
     echo "* Building ${NEWLIB}"
@@ -214,7 +229,7 @@ if [ ! -e .${GCC}.build ]; then
     echo "******************************************************************"
     echo "* Unpacking ${GCC}"
     echo "******************************************************************"
-    tar xfvj sources/${GCC}.tar.bz2
+    tar xfvj ${SOURCES}/${GCC}.tar.bz2
     cd build
     echo "******************************************************************"
     echo "* Configuring ${GCC}"
@@ -229,7 +244,8 @@ if [ ! -e .${GCC}.build ]; then
                       --with-gnu-as \
                       --with-gnu-ld \
                      --disable-nls \
-                     ${GCCFLAGS} || exit
+                      --disable-werror \
+                    ${GCCFLAGS} || exit
     echo "******************************************************************"
     echo "* Building ${GCC}"
     echo "******************************************************************"
@@ -250,7 +266,7 @@ if [ ! -e .${GDB}.build ]; then
     echo "******************************************************************"
     echo "* Unpacking ${GDB}"
     echo "******************************************************************"
-    tar xfvj sources/${GDB}.tar.bz2
+    tar xfvj ${SOURCES}/${GDB}.tar.bz2
     cd build
     echo "******************************************************************"
     echo "* Configuring ${GDB}"
@@ -259,6 +275,7 @@ if [ ! -e .${GDB}.build ]; then
                       --prefix=${PREFIX} \
                       --enable-interwork \
                       --enable-multilib \
+                      --disable-werror \
                      ${GDBFLAGS} || exit
     echo "******************************************************************"
     echo "* Building ${GDB}"
@@ -281,7 +298,7 @@ if [ ! -e .libcmsis-${LIBCMSIS}.build ]; then
     echo "******************************************************************"
     echo "* Unpacking libcmsis-${LIBCMSIS}"
     echo "******************************************************************"
-    tar xfvj sources/libcmsis-${LIBCMSIS}.tar.bz2
+    tar xfvj ${SOURCES}/libcmsis-${LIBCMSIS}.tar.bz2
     cd libcmsis-${LIBCMSIS}
     echo "******************************************************************"
     echo "* Building libcmsis-${LIBCMSIS}"
@@ -303,7 +320,7 @@ if [ ! -e .libstm32-${LIBSTM32}.build ]; then
     echo "******************************************************************"
     echo "* Unpacking libstm32-${LIBSTM32}"
     echo "******************************************************************"
-    tar xfvj sources/libstm32-${LIBSTM32}.tar.bz2
+    tar xfvj ${SOURCES}/libstm32-${LIBSTM32}.tar.bz2
     cd libstm32-${LIBSTM32}
     echo "******************************************************************"
     echo "* Building libstm32-${LIBSTM32}"
@@ -325,7 +342,7 @@ if [ ! -e .libstm32usb-${LIBSTM32USB}.build ]; then
     echo "******************************************************************"
     echo "* Unpacking libstm32usb-${LIBSTM32USB}"
     echo "******************************************************************"
-    tar xfvj sources/libstm32usb-${LIBSTM32USB}.tar.bz2
+    tar xfvj ${SOURCES}/libstm32usb-${LIBSTM32USB}.tar.bz2
     cd libstm32usb-${LIBSTM32USB}
     echo "******************************************************************"
     echo "* Building libstm32usb-${LIBSTM32USB}"
@@ -348,7 +365,7 @@ if [ $LIBOPENSTM32_EN != 0 ]; then
     echo "******************************************************************"
     echo "* Unpacking libopenstm32-${LIBOPENSTM32}"
     echo "******************************************************************"
-    tar xfvj sources/libopenstm32-${LIBOPENSTM32}.tar.bz2
+    tar xfvj ${SOURCES}/libopenstm32-${LIBOPENSTM32}.tar.bz2
     cd libopenstm32-${LIBOPENSTM32}
     echo "******************************************************************"
     echo "* Building libopenstm32-${LIBOPENSTM32}"