# apt-get install flex bison libgmp3-dev libmpfr-dev libncurses5-dev \
# libmpc-dev autoconf texinfo build-essential
#
+# Or on Ubuntu Maverick give `apt-get build-dep gcc-4.5` a try.
+#
# Stop if any command fails
set -e
+##############################################################################
+# Default settings section
+# You probably want to customize those
+# You can also pass them as parameters to the script
+##############################################################################
TARGET=arm-none-eabi # Or: TARGET=arm-elf
-PREFIX=${HOME}/arm-none-eabi # Install location of your final toolchain
-PARALLEL= # Or: PARALLEL="-j 5" for 4 CPUs
+PREFIX=/opt/cortex # Install location of your final toolchain
DARWIN_OPT_PATH=/opt/local # Path in which MacPorts or Fink is installed
# Set to 'sudo' if you need superuser privileges while installing
SUDO=
# Set to 1 to be quieter while running
-QUIET=1
-
-# For FSF GCC:
-GCCVERSION=4.5.1
-GCC=gcc-${GCCVERSION}
-GCCURL=http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.gz
-
-# For the Linaro GCC:
-# GCCVERSION=4.5-2010.08-1
-# GCC=gcc-linaro-${GCCVERSION}
-# GCCURL=http://launchpad.net/gcc-linaro/4.5/${GCCVERSION}/+download/${GCC}.tar.gz
-
-BINUTILS=binutils-2.20
-NEWLIB=newlib-1.18.0
-GDB=gdb-7.2
-LIBCMSIS=v1.10-2
-LIBSTM32=v3.0.0-1
-LIBSTM32USB=v3.0.1-1
-LIBOPENSTM32=master
+QUIET=0
+# Set to 1 to use linaro gcc instead of the FSF gcc
+USE_LINARO=1
+# Set to 1 to enable building of OpenOCD
+OOCD_EN=1
+# Set to 1 to build libstm32 provided by ST
LIBSTM32_EN=0
-LIBOPENSTM32_EN=0
+# Set to 1 to build libopencm3 an open source library for Cortex M3 and simalar
+# chips
+LIBOPENCM3_EN=1
+# Make the gcc default to Cortex-M3
+DEFAULT_TO_CORTEX_M3=0
+# Override automatic detection of cpus to compile on
+CPUS=
+
+##############################################################################
+# Parsing command line parameters
+##############################################################################
+
+while [ $# -gt 0 ]; do
+ case $1 in
+ TARGET=*)
+ TARGET=$(echo $1 | sed 's,^TARGET=,,')
+ ;;
+ PREFIX=*)
+ PREFIX=$(echo $1 | sed 's,^PREFIX=,,')
+ ;;
+ DARWIN_OPT_PATH=*)
+ DARWIN_OPT_PATH=$(echo $1 | sed 's,^DARWIN_OPT_PATH=,,')
+ ;;
+ SUDO=*)
+ SUDO=$(echo $1 | sed 's,^SUDO=,,')
+ ;;
+ QUIET=*)
+ QUIET=$(echo $1 | sed 's,^QUIET=,,')
+ ;;
+ USE_LINARO=*)
+ USE_LINARO=$(echo $1 | sed 's,^USE_LINARO=,,')
+ ;;
+ OOCD_EN=*)
+ OOCD_EN=$(echo $1 | sed 's,^OOCD_EN=,,')
+ ;;
+ LIBSTM32_EN=*)
+ LIBSTM32_EN=$(echo $1 | sed 's,^LIBSTM32_EN=,,')
+ ;;
+ LIBOPENCM3_EN=*)
+ LIBOPENCM3_EN=$(echo $1 | sed 's,^LIBOPENCM3_EN=,,')
+ ;;
+ DEFAULT_TO_CORTEX_M3=*)
+ DEFAULT_TO_CORTEX_M3=$(echo $1 | sed 's,^DEFAULT_TO_CORTEX_M3=,,')
+ ;;
+ CPUS=*)
+ CPUS=$(echo $1 | sed 's,^CPUS=,,')
+ ;;
+ *)
+ echo "Unknown parameter: $1"
+ exit 1
+ ;;
+ esac
+
+ shift # shifting parameter list to access the next one
+done
+
+echo "Settings used for this build are:"
+echo "TARGET=$TARGET"
+echo "PREFIX=$PREFIX"
+echo "DARWIN_OPT_PATH=$DARWIN_OPT_PATH"
+echo "SUDO=$SUDO"
+echo "QUIET=$QUIET"
+echo "USE_LINARO=$USE_LINARO"
+echo "OOCD_EN=$OOCD_EN"
+echo "LIBSTM32_EN=$LIBSTM32_EN"
+echo "LIBOPENCM3_EN=$LIBOPENCM3_EN"
+echo "DEFAULT_TO_CORTEX_M3=$DEFAULT_TO_CORTEX_M3"
+echo "CPUS=$CPUS"
+
+##############################################################################
+# Version and download url settings section
+##############################################################################
+if [ ${USE_LINARO} == 0 ] ; then
+ # For FSF GCC:
+ GCCVERSION=4.5.2
+ GCC=gcc-${GCCVERSION}
+ GCCURL=http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.gz
+else
+ # For the Linaro GCC:
+ GCCRELEASE=4.5-2011.02-0
+ GCCVERSION=4.5-2011.02-0
+ GCC=gcc-linaro-${GCCVERSION}
+ GCCURL=http://launchpad.net/gcc-linaro/4.5/${GCCRELEASE}/+download/${GCC}.tar.bz2
+fi
-SUMMON_DIR=$(pwd)
-SOURCES=${SUMMON_DIR}/sources
-STAMPS=${SUMMON_DIR}/stamps
+BINUTILS=binutils-2.21.1
+NEWLIB=newlib-1.19.0
+GDB=gdb-7.5.1
+OOCD=master
+LIBCMSIS=v1.10-3
+LIBSTM32=v3.0.0-2
+LIBSTM32USB=v3.0.1-1
+LIBOPENCM3=master
+
+##############################################################################
+# Flags section
+##############################################################################
+
+if [ "x${CPUS}" == "x" ]; then
+ if which getconf > /dev/null; then
+ CPUS=$(getconf _NPROCESSORS_ONLN)
+ else
+ CPUS=1
+ fi
+
+ PARALLEL=-j$((CPUS + 1))
+else
+ PARALLEL=-j${CPUS}
+fi
+
+echo "${CPUS} cpu's detected running make with '${PARALLEL}' flag"
+
+GDBFLAGS=
+BINUTILFLAGS=
+
+if [ ${DEFAULT_TO_CORTEX_M3} == 0 ] ; then
+ GCCFLAGS=
+else
+ # To default to the Cortex-M3:
+ GCCFLAGS="--with-arch=armv7-m --with-mode=thumb --with-float=soft"
+fi
+
+# Pull in the local configuration, if any
+if [ -f local.sh ]; then
+ . ./local.sh
+fi
MAKEFLAGS=${PARALLEL}
TARFLAGS=v
export PATH="${PREFIX}/bin:${PATH}"
-GCCFLAGS=
-GDBFLAGS=
-BINUTILFLAGS=
+SUMMON_DIR=$(pwd)
+SOURCES=${SUMMON_DIR}/sources
+STAMPS=${SUMMON_DIR}/stamps
+
+
+##############################################################################
+# Tool section
+##############################################################################
+TAR=tar
+
+##############################################################################
+# OS and Tooldetection section
+# Detects which tools and flags to use
+##############################################################################
+
+case "$(uname)" in
+ Linux)
+ echo "Found Linux OS."
+ ;;
+ Darwin)
+ echo "Found Darwin OS."
+ GCCFLAGS="${GCCFLAGS} \
+ --with-gmp=${DARWIN_OPT_PATH} \
+ --with-mpfr=${DARWIN_OPT_PATH} \
+ --with-mpc=${DARWIN_OPT_PATH} \
+ --with-libiconv-prefix=${DARWIN_OPT_PATH}"
+ OOCD_CFLAGS="-I/opt/mine/include -I/opt/local/include"
+ OOCD_LDFLAGS="-L/opt/mine/lib -L/opt/local/lib"
+ if gcc --version | grep llvm-gcc > /dev/null ; then
+ echo "Found you are using llvm gcc, switching to clang for gcc compile."
+ GCC_CC=clang
+ fi
+ ;;
+ CYGWIN*)
+ echo "Found CygWin that means Windows most likely."
+ ;;
+ *)
+ echo "Found unknown OS. Aborting!"
+ exit 1
+ ;;
+esac
-# To default to the Cortex-M3:
-# GCCFLAGS="--with-arch=armv7-m --with-mode=thumb"
+##############################################################################
+# Building section
+# You probably don't have to touch anything after this
+##############################################################################
# Fetch a versioned file from a URL
function fetch {
if [ ! -e ${STAMPS}/$1.fetch ]; then
log "Downloading $1 sources..."
- wget -c --no-passive-ftp $2
- touch ${STAMPS}/$1.fetch
+ wget -c $2 && touch ${STAMPS}/$1.fetch
fi
}
function unpack {
log Unpacking $*
# Use 'auto' mode decompression. Replace with a switch if tar doesn't support -a
- tar xaf${TARFLAGS} ${SOURCES}/$1.tar.*
+ ARCHIVE=$(ls ${SOURCES}/$1.tar.*)
+ case ${ARCHIVE} in
+ *.bz2)
+ echo "archive type bz2"
+ TYPE=j
+ ;;
+ *.gz)
+ echo "archive type gz"
+ TYPE=z
+ ;;
+ *)
+ echo "Unknown archive type of $1"
+ echo ${ARCHIVE}
+ exit 1
+ ;;
+ esac
+ ${TAR} xf${TYPE}${TARFLAGS} ${SOURCES}/$1.tar.*
}
# Install a build
${SUDO} make ${MAKEFLAGS} $2 $3 $4 $5 $6 $7 $8
}
-case "$(uname)" in
- Linux)
- echo "Found Linux OS."
- ;;
- Darwin)
- echo "Found Darwin OS."
- GCCFLAGS="${GCCFLAGS} \
- --with-gmp=${DARWIN_OPT_PATH} \
- --with-mpfr=${DARWIN_OPT_PATH} \
- --with-mpc=${DARWIN_OPT_PATH} \
- -with-libiconv-prefix=${DARWIN_OPT_PATH}"
- ;;
- *)
- echo "Found unknown OS. Aborting!"
- exit 1
- ;;
-esac
mkdir -p ${STAMPS} ${SOURCES}
fetch ${NEWLIB} ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz
fetch ${GDB} http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2
+if [ ${OOCD_EN} != 0 ]; then
+if [ ! -e openocd-${OOCD}.tar.bz2 ]; then
+ log "Cloning OpenOCD sources..."
+ git clone git://openocd.git.sourceforge.net/gitroot/openocd/openocd openocd-${OOCD}
+ cd openocd-${OOCD}
+ ./bootstrap
+ cd ..
+ tar cfvj openocd-${OOCD}.tar.bz2 openocd-${OOCD}
+ #git archive --format=tar --prefix=openocd-${OOCD}/ ${OOCD} | \
+ # bzip2 --stdout > ../openocd-${OOCD}.tar.bz2
+ rm -rf openocd-${OOCD}
+fi
+fi
+
if [ ${LIBSTM32_EN} != 0 ]; then
if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then
log "Cloning libcmsis sources..."
fi
fi
-if [ ${LIBOPENSTM32_EN} != 0 ]; then
-if [ ! -e libopenstm32-${LIBOPENSTM32}.tar.bz2 ]; then
- log "Cloning libopenstm32 sources..."
- git clone git://libopenstm32.git.sourceforge.net/gitroot/libopenstm32/libopenstm32
- cd libopenstm32
- git archive --format=tar --prefix=libopenstm32-${LIBOPENSTM32}/ ${LIBOPENSTM32} | \
- bzip2 --stdout > ../libopenstm32-${LIBOPENSTM32}.tar.bz2
+if [ ${LIBOPENCM3_EN} != 0 ]; then
+if [ ! -e libopencm3-${LIBOPENCM3}.tar.bz2 ]; then
+ log "Cloning libopencm3 sources..."
+ git clone https://github.com/libopencm3/libopencm3
+ cd libopencm3
+ git archive --format=tar --prefix=libopencm3-${LIBOPENCM3}/ ${LIBOPENCM3} | \
+ bzip2 --stdout > ../libopencm3-${LIBOPENCM3}.tar.bz2
cd ..
- rm -rf libopenstm32
+ rm -rf libopencm3
fi
fi
if [ ! -e ${STAMPS}/${BINUTILS}.build ]; then
unpack ${BINUTILS}
+ log "Patching binutils to allow SVC support on cortex-m3"
+ cd ${BINUTILS}
+ patch -p1 -i ../patches/patch-binutils-2.21.1-svc-cortexm3.diff
+ cd ..
cd build
log "Configuring ${BINUTILS}"
../${BINUTILS}/configure --target=${TARGET} \
- --prefix=${PREFIX} \
- --enable-interwork \
- --enable-multilib \
- --with-gnu-as \
- --with-gnu-ld \
- --disable-nls \
- --disable-werror \
- ${BINUTILFLAGS}
+ --prefix=${PREFIX} \
+ --enable-interwork \
+ --enable-multilib \
+ --with-gnu-as \
+ --with-gnu-ld \
+ --disable-nls \
+ --disable-werror \
+ ${BINUTILFLAGS}
log "Building ${BINUTILS}"
make ${MAKEFLAGS}
install ${BINUTILS} install
rm -rf build/* ${BINUTILS}
fi
-if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then
- unpack ${GCC} boot
- cd build
- log "Configuring ${GCC}-boot"
- ../${GCC}/configure --target=${TARGET} \
- --prefix=${PREFIX} \
- --enable-interwork \
- --enable-multilib \
- --enable-languages="c" \
- --with-newlib \
- --without-headers \
- --disable-shared \
- --with-gnu-as \
- --with-gnu-ld \
- --disable-nls \
- --disable-werror \
- ${GCCFLAGS}
- log "Building ${GCC}-boot"
- make ${MAKEFLAGS} all-gcc
- install ${GCC}-boot install-gcc
- cd ..
- log "Cleaning up ${GCC}-boot"
- touch ${STAMPS}/${GCC}-boot.build
- rm -rf build/* ${GCC}
-fi
-
-if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then
+if [ ! -e ${STAMPS}/${GCC}-${NEWLIB}.build ]; then
+ unpack ${GCC}
unpack ${NEWLIB}
- cd build
- log "Configuring ${NEWLIB}"
- ../${NEWLIB}/configure --target=${TARGET} \
- --prefix=${PREFIX} \
- --enable-interwork \
- --enable-multilib \
- --with-gnu-as \
- --with-gnu-ld \
- --disable-nls \
- --disable-werror \
- --disable-newlib-supplied-syscalls
- log "Building ${NEWLIB}"
- make ${MAKEFLAGS}
- install ${NEWLIB} install
- cd ..
- log "Cleaning up ${NEWLIB}"
- touch ${STAMPS}/${NEWLIB}.build
- rm -rf build/* ${NEWLIB}
-fi
-# Yes, you need to build gcc again!
-if [ ! -e ${STAMPS}/${GCC}.build ]; then
- unpack ${GCC}
+ log "Adding newlib symlink to gcc"
+ ln -f -s `pwd`/${NEWLIB}/newlib ${GCC}
+ log "Adding libgloss symlink to gcc"
+ ln -f -s `pwd`/${NEWLIB}/libgloss ${GCC}
+
+ if [ ${DEFAULT_TO_CORTEX_M3} == 0 ] ; then
+ log "Patching gcc to add multilib support"
+ cd ${GCC}
+ patch -p0 -i ../patches/patch-gcc-config-arm-t-arm-elf.diff
+ cd ..
+ fi
+
cd build
- log "Configuring ${GCC}"
+ if [ "X${GCC_CC}" != "X" ] ; then
+ export GLOBAL_CC=${CC}
+ log "Overriding the default compiler with: \"${GCC_CC}\""
+ export CC=${GCC_CC}
+ fi
+
+ log "Configuring ${GCC} and ${NEWLIB}"
../${GCC}/configure --target=${TARGET} \
--prefix=${PREFIX} \
--enable-interwork \
--enable-multilib \
--enable-languages="c,c++" \
--with-newlib \
- --disable-shared \
--with-gnu-as \
--with-gnu-ld \
- --disable-nls \
+ --disable-nls \
+ --disable-shared \
+ --disable-threads \
+ --with-headers=newlib/libc/include \
+ --disable-libssp \
+ --disable-libstdcxx-pch \
+ --disable-libmudflap \
+ --disable-libgomp \
--disable-werror \
- ${GCCFLAGS}
- log "Building ${GCC}"
+ --with-system-zlib \
+ --disable-newlib-supplied-syscalls \
+ ${GCCFLAGS}
+ log "Building ${GCC} and ${NEWLIB}"
make ${MAKEFLAGS}
install ${GCC} install
cd ..
- log "Cleaning up ${GCC}"
- touch ${STAMPS}/${GCC}.build
- rm -rf build/* ${GCC}
+ log "Cleaning up ${GCC} and ${NEWLIB}"
+
+ if [ "X${GCC_CC}" != "X" ] ; then
+ unset CC
+ CC=${GLOBAL_CC}
+ unset GLOBAL_CC
+ fi
+
+ touch ${STAMPS}/${GCC}-${NEWLIB}.build
+ rm -rf build/* ${GCC} ${NEWLIB}
fi
if [ ! -e ${STAMPS}/${GDB}.build ]; then
rm -rf build/* ${GDB}
fi
+if [ ${OOCD_EN} != 0 ]; then
+if [ ! -e ${STAMPS}/openocd-${OOCD}.build ]; then
+ unpack openocd-${OOCD}
+ cd build
+ log "Configuring openocd-${OOCD}"
+ CFLAGS="${CFLAGS} ${OOCD_CFLAGS}" \
+ LDFLAGS="${LDFLAGS} ${OOCD_LDFLAGS}" \
+ ../openocd-${OOCD}/configure --enable-maintainer-mode \
+ --disable-werror \
+ --prefix=${PREFIX} \
+ --enable-dummy \
+ --enable-ft2232_libftdi \
+ --enable-usb_blaster_libftdi \
+ --enable-ep93xx \
+ --enable-at91rm9200 \
+ --enable-presto_libftdi \
+ --enable-usbprog \
+ --enable-jlink \
+ --enable-vsllink \
+ --enable-rlink \
+ --enable-arm-jtag-ew
+ log "Building openocd-${OOCD}"
+ make ${MAKEFLAGS}
+ install openocd-${OOCD} install
+ cd ..
+ log "Cleaning up openocd-${OOCD}"
+ touch ${STAMPS}/openocd-${OOCD}.build
+ rm -rf build/* ${OOCD}
+fi
+fi
+
if [ ${LIBSTM32_EN} != 0 ]; then
-if [ ! -e .libcmsis-${LIBCMSIS}.build ]; then
+if [ ! -e ${STAMPS}/libcmsis-${LIBCMSIS}.build ]; then
unpack libcmsis-${LIBCMSIS}
cd libcmsis-${LIBCMSIS}
log "Building libcmsis-${LIBCMSIS}"
install libcmsis-${LIBCMSIS} arch_prefix=${TARGET} prefix=${PREFIX} install
cd ..
log "Cleaning up libcmsis-${LIBCMSIS}"
- touch .libcmsis-${LIBCMSIS}.build
+ touch ${STAMPS}/libcmsis-${LIBCMSIS}.build
rm -rf libcmsis-${LIBCMSIS}
fi
-if [ ! -e .libstm32-${LIBSTM32}.build ]; then
+if [ ! -e ${STAMPS}/libstm32-${LIBSTM32}.build ]; then
unpack libstm32-${LIBSTM32}
cd libstm32-${LIBSTM32}
log "Building libstm32-${LIBSTM32}"
install libstm32-${LIBSTM32} arch_prefix=${TARGET} prefix=${PREFIX} install
cd ..
log "Cleaning up libstm32-${LIBSTM32}"
- touch .libstm32-${LIBSTM32}.build
+ touch ${STAMPS}/libstm32-${LIBSTM32}.build
rm -rf libstm32-${LIBSTM32}
fi
-if [ ! -e .libstm32usb-${LIBSTM32USB}.build ]; then
+if [ ! -e ${STAMPS}/libstm32usb-${LIBSTM32USB}.build ]; then
unpack libstm32usb-${LIBSTM32USB}
cd libstm32usb-${LIBSTM32USB}
log "Building libstm32usb-${LIBSTM32USB}"
install libstm32usb-${LIBSTM32USB} arch_prefix=${TARGET} prefix=${PREFIX} install
cd ..
log "Cleaning up libstm32usb-${LIBSTM32USB}"
- touch .libstm32usb-${LIBSTM32USB}.build
+ touch ${STAMPS}/libstm32usb-${LIBSTM32USB}.build
rm -rf libstm32usb-${LIBSTM32USB}
fi
fi
-if [ $LIBOPENSTM32_EN != 0 ]; then
- unpack libopenstm32-${LIBOPENSTM32}
- cd libopenstm32-${LIBOPENSTM32}
- log "Building libopenstm32-${LIBOPENSTM32}"
+if [ $LIBOPENCM3_EN != 0 ]; then
+if [ ! -e ${STAMPS}/libopencm3-${LIBOPENCM3}.build ]; then
+ unpack libopencm3-${LIBOPENCM3}
+ cd libopencm3-${LIBOPENCM3}
+ log "Building libopencm3-${LIBOPENCM3}"
make PREFIX=${TARGET} DESTDIR=${PREFIX}
- install libopenstm32-${LIBOPENSTM32} PREFIX=${TARGET} DESTDIR=${PREFIX} install
+ install libopencm3-${LIBOPENCM3} PREFIX=${TARGET} DESTDIR=${PREFIX} install
cd ..
- log "Cleaning up libopenstm32-${LIBOPENSTM32}"
- touch .libopenstm32-${LIBOPENSTM32}.build
- rm -rf libopenstm32-${LIBOPENSTM32}
+ log "Cleaning up libopencm3-${LIBOPENCM3}"
+ touch ${STAMPS}/libopencm3-${LIBOPENCM3}.build
+ rm -rf libopencm3-${LIBOPENCM3}
+fi
fi
projects / fw / cortex-toolchain / blobdiff