# Written by Uwe Hermann <uwe@hermann-uwe.de>, released as public domain.
# Modified by Piotr Esden-Tempski <piotr@esden.net>, released as public domain.
+#
+# Requirements (example is for Debian, replace package names as needed):
+#
+# apt-get install flex bison libgmp3-dev libmpfr-dev libncurses5-dev \
+# libmpc-dev autoconf texinfo build-essential
+#
+
TARGET=arm-none-eabi # Or: TARGET=arm-elf
PREFIX=${HOME}/arm-none-eabi # Install location of your final toolchain
PARALLEL="" # Or: PARALLEL="-j 5" for 4 CPUs
DARWIN_OPT_PATH=/opt/local # Path in which MacPorts or Fink is installed
-BINUTILS=binutils-2.19.1
-GCC=gcc-4.4.2
-NEWLIB=newlib-1.17.0
-GDB=gdb-7.1
+BINUTILS=binutils-2.20
+GCC=gcc-4.5.1
+NEWLIB=newlib-1.18.0
+GDB=gdb-7.2
LIBCMSIS=v1.10-2
LIBSTM32=v3.0.0-1
LIBSTM32USB=v3.0.1-1
SUMMON_DIR=$(pwd)
SOURCES=${SUMMON_DIR}/sources
+STAMPS=${SUMMON_DIR}/stamps
export PATH="${PREFIX}/bin:${PATH}"
GDBFLAGS=
BINUTILFLAGS=
+# Fetch a versioned file from a URL
+function fetch {
+ if [ ! -e ${STAMPS}/$1.fetch ]; then
+ echo "Downloading $1 sources..."
+ wget -c --no-passive-ftp $2
+ touch ${STAMPS}/$1.fetch
+ fi
+}
+
+# Log a message out to the console
+function log {
+ echo "******************************************************************"
+ echo "* $*"
+ echo "******************************************************************"
+}
+
case "$(uname)" in
Linux)
echo "Found Linux OS."
echo "Found Darwin OS."
GCCFLAGS="--with-gmp=${DARWIN_OPT_PATH} \
--with-mpfr=${DARWIN_OPT_PATH} \
+ --with-mpc=${DARWIN_OPT_PATH} \
-with-libiconv-prefix=${DARWIN_OPT_PATH}"
;;
*)
;;
esac
-if [ ! -e ${SOURCES} ]; then
- mkdir ${SOURCES}
-fi
+mkdir -p ${STAMPS} ${SOURCES}
cd ${SOURCES}
-echo "Downloading binutils sources..."
-wget -c http://ftp.gnu.org/gnu/binutils/${BINUTILS}.tar.bz2
-
-echo "Downloading gcc sources..."
-wget -c http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.bz2
-
-echo "Downloading newlib sources..."
-wget -c --no-passive-ftp ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz
-
-echo "Downloading gdb sources..."
-wget -c http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2
+fetch ${BINUTILS} http://ftp.gnu.org/gnu/binutils/${BINUTILS}.tar.bz2
+fetch ${GCC} ${GCC_URL}
+fetch ${NEWLIB} ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz
+fetch ${GDB} http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2
if [ ${LIBSTM32_EN} != 0 ]; then
if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then
mkdir build
fi
-if [ ! -e .${BINUTILS}.build ]; then
- echo "******************************************************************"
- echo "* Unpacking ${BINUTILS}"
- echo "******************************************************************"
+if [ ! -e ${STAMPS}/${BINUTILS}.build ]; then
+ log "Unpacking ${BINUTILS}"
tar xfvj ${SOURCES}/${BINUTILS}.tar.bz2
cd build
- echo "******************************************************************"
- echo "* Configuring ${BINUTILS}"
- echo "******************************************************************"
+ log "Configuring ${BINUTILS}"
../${BINUTILS}/configure --target=${TARGET} \
--prefix=${PREFIX} \
--enable-interwork \
--disable-nls \
--disable-werror \
${BINUTILFLAGS} || exit
- echo "******************************************************************"
- echo "* Building ${BINUTILS}"
- echo "******************************************************************"
+ log "Building ${BINUTILS}"
make ${PARALLEL} || exit
- echo "******************************************************************"
- echo "* Installing ${BINUTILS}"
- echo "******************************************************************"
+ log "Installing ${BINUTILS}"
make install || exit
cd ..
- echo "******************************************************************"
- echo "* Cleaning up ${BINUTILS}"
- echo "******************************************************************"
- touch .${BINUTILS}.build
+ log "Cleaning up ${BINUTILS}"
+ touch ${STAMPS}/${BINUTILS}.build
rm -rf build/* ${BINUTILS}
fi
-if [ ! -e .${GCC}-boot.build ]; then
- echo "******************************************************************"
- echo "* Unpacking ${GCC}-boot"
- echo "******************************************************************"
+if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then
+ log "Unpacking ${GCC}-boot"
tar xfvj ${SOURCES}/${GCC}.tar.bz2
cd build
- echo "******************************************************************"
- echo "* Configuring ${GCC}-boot"
- echo "******************************************************************"
+ log "Configuring ${GCC}-boot"
../${GCC}/configure --target=${TARGET} \
--prefix=${PREFIX} \
--enable-interwork \
--with-gnu-as \
--with-gnu-ld \
--disable-nls \
+ --disable-werror \
${GCCFLAGS} || exit
- echo "******************************************************************"
- echo "* Building ${GCC}-boot"
- echo "******************************************************************"
+ log "Building ${GCC}-boot"
make ${PARALLEL} all-gcc || exit
- echo "******************************************************************"
- echo "* Installing ${GCC}-boot"
- echo "******************************************************************"
+ log "Installing ${GCC}-boot"
make install-gcc || exit
cd ..
- echo "******************************************************************"
- echo "* Cleaning up ${GCC}-boot"
- echo "******************************************************************"
- touch .${GCC}-boot.build
+ log "Cleaning up ${GCC}-boot"
+ touch ${STAMPS}/${GCC}-boot.build
rm -rf build/* ${GCC}
fi
-if [ ! -e .${NEWLIB}.build ]; then
- echo "******************************************************************"
- echo "* Unpacking ${NEWLIB}"
- echo "******************************************************************"
+if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then
+ log "Unpacking ${NEWLIB}"
tar xfvz ${SOURCES}/${NEWLIB}.tar.gz
cd build
- echo "******************************************************************"
- echo "* Configuring ${NEWLIB}"
- echo "******************************************************************"
+ log "Configuring ${NEWLIB}"
../${NEWLIB}/configure --target=${TARGET} \
--prefix=${PREFIX} \
--enable-interwork \
--with-gnu-as \
--with-gnu-ld \
--disable-nls \
+ --disable-werror \
--disable-newlib-supplied-syscalls || exit
- echo "******************************************************************"
- echo "* Building ${NEWLIB}"
- echo "******************************************************************"
+ log "Building ${NEWLIB}"
make ${PARALLEL} || exit
- echo "******************************************************************"
- echo "* Installing ${NEWLIB}"
- echo "******************************************************************"
+ log "Installing ${NEWLIB}"
make install || exit
cd ..
- echo "******************************************************************"
- echo "* Cleaning up ${NEWLIB}"
- echo "******************************************************************"
- touch .${NEWLIB}.build
+ log "Cleaning up ${NEWLIB}"
+ touch ${STAMPS}/${NEWLIB}.build
rm -rf build/* ${NEWLIB}
fi
# Yes, you need to build gcc again!
-if [ ! -e .${GCC}.build ]; then
- echo "******************************************************************"
- echo "* Unpacking ${GCC}"
- echo "******************************************************************"
+if [ ! -e ${STAMPS}/${GCC}.build ]; then
+ log "Unpacking ${GCC}"
tar xfvj ${SOURCES}/${GCC}.tar.bz2
cd build
- echo "******************************************************************"
- echo "* Configuring ${GCC}"
- echo "******************************************************************"
+ log "Configuring ${GCC}"
../${GCC}/configure --target=${TARGET} \
--prefix=${PREFIX} \
--enable-interwork \
--with-gnu-as \
--with-gnu-ld \
--disable-nls \
+ --disable-werror \
${GCCFLAGS} || exit
- echo "******************************************************************"
- echo "* Building ${GCC}"
- echo "******************************************************************"
+ log "Building ${GCC}"
make ${PARALLEL} || exit
- echo "******************************************************************"
- echo "* Installing ${GCC}"
- echo "******************************************************************"
+ log "Installing ${GCC}"
make install || exit
cd ..
- echo "******************************************************************"
- echo "* Cleaning up ${GCC}"
- echo "******************************************************************"
- touch .${GCC}.build
+ log "Cleaning up ${GCC}"
+ touch ${STAMPS}/${GCC}.build
rm -rf build/* ${GCC}
fi
-if [ ! -e .${GDB}.build ]; then
- echo "******************************************************************"
- echo "* Unpacking ${GDB}"
- echo "******************************************************************"
+if [ ! -e ${STAMPS}/${GDB}.build ]; then
+ log "Unpacking ${GDB}"
tar xfvj ${SOURCES}/${GDB}.tar.bz2
cd build
- echo "******************************************************************"
- echo "* Configuring ${GDB}"
- echo "******************************************************************"
+ log "Configuring ${GDB}"
../${GDB}/configure --target=${TARGET} \
--prefix=${PREFIX} \
--enable-interwork \
--enable-multilib \
--disable-werror \
${GDBFLAGS} || exit
- echo "******************************************************************"
- echo "* Building ${GDB}"
- echo "******************************************************************"
+ log "Building ${GDB}"
make ${PARALLEL} || exit
- echo "******************************************************************"
- echo "* Installing ${GDB}"
- echo "******************************************************************"
+ log "Installing ${GDB}"
make install || exit
cd ..
- echo "******************************************************************"
- echo "* Cleaning up ${GDB}"
- echo "******************************************************************"
- touch .${GDB}.build
+ log "Cleaning up ${GDB}"
+ touch ${STAMPS}/${GDB}.build
rm -rf build/* ${GDB}
fi
if [ ${LIBSTM32_EN} != 0 ]; then
if [ ! -e .libcmsis-${LIBCMSIS}.build ]; then
- echo "******************************************************************"
- echo "* Unpacking libcmsis-${LIBCMSIS}"
- echo "******************************************************************"
+ log "Unpacking libcmsis-${LIBCMSIS}"
tar xfvj ${SOURCES}/libcmsis-${LIBCMSIS}.tar.bz2
cd libcmsis-${LIBCMSIS}
- echo "******************************************************************"
- echo "* Building libcmsis-${LIBCMSIS}"
- echo "******************************************************************"
+ log "Building libcmsis-${LIBCMSIS}"
make arch_prefix=${TARGET} prefix=${PREFIX} || exit
- echo "******************************************************************"
- echo "* Installing libcmsis-${LIBCMSIS}"
- echo "******************************************************************"
+ log "Installing libcmsis-${LIBCMSIS}"
make arch_prefix=${TARGET} prefix=${PREFIX} install || exit
cd ..
- echo "******************************************************************"
- echo "* Cleaning up libcmsis-${LIBCMSIS}"
- echo "******************************************************************"
+ log "Cleaning up libcmsis-${LIBCMSIS}"
touch .libcmsis-${LIBCMSIS}.build
rm -rf libcmsis-${LIBCMSIS}
fi
if [ ! -e .libstm32-${LIBSTM32}.build ]; then
- echo "******************************************************************"
- echo "* Unpacking libstm32-${LIBSTM32}"
- echo "******************************************************************"
+ log "Unpacking libstm32-${LIBSTM32}"
tar xfvj ${SOURCES}/libstm32-${LIBSTM32}.tar.bz2
cd libstm32-${LIBSTM32}
- echo "******************************************************************"
- echo "* Building libstm32-${LIBSTM32}"
- echo "******************************************************************"
+ log "Building libstm32-${LIBSTM32}"
make arch_prefix=${TARGET} prefix=${PREFIX} || exit
- echo "******************************************************************"
- echo "* Installing libstm32-${LIBSTM32}"
- echo "******************************************************************"
+ log "Installing libstm32-${LIBSTM32}"
make arch_prefix=${TARGET} prefix=${PREFIX} install || exit
cd ..
- echo "******************************************************************"
- echo "* Cleaning up libstm32-${LIBSTM32}"
- echo "******************************************************************"
+ log "Cleaning up libstm32-${LIBSTM32}"
touch .libstm32-${LIBSTM32}.build
rm -rf libstm32-${LIBSTM32}
fi
if [ ! -e .libstm32usb-${LIBSTM32USB}.build ]; then
- echo "******************************************************************"
- echo "* Unpacking libstm32usb-${LIBSTM32USB}"
- echo "******************************************************************"
+ log "Unpacking libstm32usb-${LIBSTM32USB}"
tar xfvj ${SOURCES}/libstm32usb-${LIBSTM32USB}.tar.bz2
cd libstm32usb-${LIBSTM32USB}
- echo "******************************************************************"
- echo "* Building libstm32usb-${LIBSTM32USB}"
- echo "******************************************************************"
+ log "Building libstm32usb-${LIBSTM32USB}"
make arch_prefix=${TARGET} prefix=${PREFIX} || exit
- echo "******************************************************************"
- echo "* Installing libstm32usb-${LIBSTM32USB}"
- echo "******************************************************************"
+ log "Installing libstm32usb-${LIBSTM32USB}"
make arch_prefix=${TARGET} prefix=${PREFIX} install || exit
cd ..
- echo "******************************************************************"
- echo "* Cleaning up libstm32usb-${LIBSTM32USB}"
- echo "******************************************************************"
+ log "Cleaning up libstm32usb-${LIBSTM32USB}"
touch .libstm32usb-${LIBSTM32USB}.build
rm -rf libstm32usb-${LIBSTM32USB}
fi
fi
if [ $LIBOPENSTM32_EN != 0 ]; then
- echo "******************************************************************"
- echo "* Unpacking libopenstm32-${LIBOPENSTM32}"
- echo "******************************************************************"
+ log "Unpacking libopenstm32-${LIBOPENSTM32}"
tar xfvj ${SOURCES}/libopenstm32-${LIBOPENSTM32}.tar.bz2
cd libopenstm32-${LIBOPENSTM32}
- echo "******************************************************************"
- echo "* Building libopenstm32-${LIBOPENSTM32}"
- echo "******************************************************************"
+ log "Building libopenstm32-${LIBOPENSTM32}"
make PREFIX=${TARGET} DESTDIR=${PREFIX} || exit
- echo "******************************************************************"
- echo "* Installing libopenstm32-${LIBOPENSTM32}"
- echo "******************************************************************"
+ log "Installing libopenstm32-${LIBOPENSTM32}"
make PREFIX=${TARGET} DESTDIR=${PREFIX} install || exit
cd ..
- echo "******************************************************************"
- echo "* Cleaning up libopenstm32-${LIBOPENSTM32}"
- echo "******************************************************************"
+ log "Cleaning up libopenstm32-${LIBOPENSTM32}"
touch .libopenstm32-${LIBOPENSTM32}.build
rm -rf libopenstm32-${LIBOPENSTM32}
fi
projects / fw / cortex-toolchain / blobdiff