Added ability to have a local config that overrides the script.

[fw/cortex-toolchain] / summon-arm-toolchain

diff --git a/summon-arm-toolchain b/summon-arm-toolchain
index fa6d103dfdefe14a67a08be468f29c904d7eec46..7972c1ba301e2cb67e8b897c56add3f18b2484a1 100755 (executable)
--- a/summon-arm-toolchain
+++ b/summon-arm-toolchain
@@ -16,9 +16,22 @@ TARGET=arm-none-eabi         # Or: TARGET=arm-elf
 PREFIX=${HOME}/arm-none-eabi   # Install location of your final toolchain
 PARALLEL=                      # Or: PARALLEL="-j 5" for 4 CPUs
 DARWIN_OPT_PATH=/opt/local     # Path in which MacPorts or Fink is installed
+# Set to 'sudo' if you need superuser privileges while installing
+SUDO=
+# Set to 1 to be quieter while running
+QUIET=0
+
+# For FSF GCC:
+GCCVERSION=4.5.1
+GCC=gcc-${GCCVERSION}
+GCCURL=http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.gz
+
+# For the Linaro GCC:
+# GCCVERSION=4.5-2010.08-1
+# GCC=gcc-linaro-${GCCVERSION}
+# GCCURL=http://launchpad.net/gcc-linaro/4.5/${GCCVERSION}/+download/${GCC}.tar.gz
 
 BINUTILS=binutils-2.20
-GCC=gcc-4.5.1
 NEWLIB=newlib-1.18.0
 GDB=gdb-7.2
 LIBCMSIS=v1.10-2
@@ -28,7 +41,6 @@ LIBOPENSTM32=master
 LIBSTM32_EN=0
 LIBOPENSTM32_EN=0
 
-SUDO=
 SUMMON_DIR=$(pwd)
 SOURCES=${SUMMON_DIR}/sources
 STAMPS=${SUMMON_DIR}/stamps
@@ -39,10 +51,26 @@ GCCFLAGS=
 GDBFLAGS=
 BINUTILFLAGS=
 
+# To default to the Cortex-M3:
+# GCCFLAGS="--with-arch=armv7-m --with-mode=thumb"
+
+# Pull in the local configuration, if any
+if [ -f local.sh ]; then
+    . ./local.sh
+fi
+
+MAKEFLAGS=${PARALLEL}
+TARFLAGS=v
+
+if [ ${QUIET} != 0 ]; then
+    TARFLAGS=
+    MAKEFLAGS="${MAKEFLAGS} -s"
+fi
+
 # Fetch a versioned file from a URL
 function fetch {
     if [ ! -e ${STAMPS}/$1.fetch ]; then
-        echo "Downloading $1 sources..."
+        log "Downloading $1 sources..."
         wget -c --no-passive-ftp $2
         touch ${STAMPS}/$1.fetch
     fi
@@ -59,13 +87,13 @@ function log {
 function unpack {
     log Unpacking $*
     # Use 'auto' mode decompression.  Replace with a switch if tar doesn't support -a
-    tar xvaf ${SOURCES}/$1.tar.*
+    tar xaf${TARFLAGS} ${SOURCES}/$1.tar.*
 }
 
 # Install a build
 function install {
     log $1
-    ${SUDO} make ${PARALLEL} $2 $3 $4 $5 $6 $7 $8
+    ${SUDO} make ${MAKEFLAGS} $2 $3 $4 $5 $6 $7 $8
 }
 
 case "$(uname)" in
@@ -91,13 +119,13 @@ mkdir -p ${STAMPS} ${SOURCES}
 cd ${SOURCES}
 
 fetch ${BINUTILS} http://ftp.gnu.org/gnu/binutils/${BINUTILS}.tar.bz2
-fetch ${GCC} http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.gz
+fetch ${GCC} ${GCCURL}
 fetch ${NEWLIB} ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz
 fetch ${GDB} http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2
 
 if [ ${LIBSTM32_EN} != 0 ]; then
 if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then
-       echo "Cloning libcmsis sources..."
+       log "Cloning libcmsis sources..."
        git clone git://git.open-bldc.org/libcmsis.git
         cd libcmsis
         git archive --format=tar --prefix=libcmsis-${LIBCMSIS}/ ${LIBCMSIS} | \
@@ -107,7 +135,7 @@ if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then
 fi
 
 if [ ! -e libstm32-${LIBSTM32}.tar.bz2 ]; then
-       echo "Cloning libstm32 sources..."
+       log "Cloning libstm32 sources..."
        git clone git://git.open-bldc.org/libstm32.git
         cd libstm32
         git archive --format=tar --prefix=libstm32-${LIBSTM32}/ ${LIBSTM32} | \
@@ -117,7 +145,7 @@ if [ ! -e libstm32-${LIBSTM32}.tar.bz2 ]; then
 fi
 
 if [ ! -e libstm32usb-${LIBSTM32USB}.tar.bz2 ]; then
-       echo "Cloning libstm32usb sources..."
+       log "Cloning libstm32usb sources..."
        git clone git://git.open-bldc.org/libstm32usb.git
         cd libstm32usb
         git archive --format=tar --prefix=libstm32usb-${LIBSTM32USB}/ ${LIBSTM32USB} | \
@@ -129,7 +157,7 @@ fi
 
 if [ ${LIBOPENSTM32_EN} != 0 ]; then
 if [ ! -e libopenstm32-${LIBOPENSTM32}.tar.bz2 ]; then
-       echo "Cloning libopenstm32 sources..."
+       log "Cloning libopenstm32 sources..."
        git clone git://libopenstm32.git.sourceforge.net/gitroot/libopenstm32/libopenstm32
         cd libopenstm32
         git archive --format=tar --prefix=libopenstm32-${LIBOPENSTM32}/ ${LIBOPENSTM32} | \
@@ -159,7 +187,7 @@ if [ ! -e ${STAMPS}/${BINUTILS}.build ]; then
                            --disable-werror \
                           ${BINUTILFLAGS}
     log "Building ${BINUTILS}"
-    make ${PARALLEL}
+    make ${MAKEFLAGS}
     install ${BINUTILS} install
     cd ..
     log "Cleaning up ${BINUTILS}"
@@ -185,7 +213,7 @@ if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then
                       --disable-werror \
                      ${GCCFLAGS}
     log "Building ${GCC}-boot"
-    make ${PARALLEL} all-gcc
+    make ${MAKEFLAGS} all-gcc
     install ${GCC}-boot install-gcc
     cd ..
     log "Cleaning up ${GCC}-boot"
@@ -207,7 +235,7 @@ if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then
                          --disable-werror \
                          --disable-newlib-supplied-syscalls
     log "Building ${NEWLIB}"
-    make ${PARALLEL}
+    make ${MAKEFLAGS}
     install ${NEWLIB} install
     cd ..
     log "Cleaning up ${NEWLIB}"
@@ -233,7 +261,7 @@ if [ ! -e ${STAMPS}/${GCC}.build ]; then
                       --disable-werror \
                     ${GCCFLAGS}
     log "Building ${GCC}"
-    make ${PARALLEL}
+    make ${MAKEFLAGS}
     install ${GCC} install
     cd ..
     log "Cleaning up ${GCC}"
@@ -252,7 +280,7 @@ if [ ! -e ${STAMPS}/${GDB}.build ]; then
                       --disable-werror \
                      ${GDBFLAGS}
     log "Building ${GDB}"
-    make ${PARALLEL}
+    make ${MAKEFLAGS}
     install ${GDB} install
     cd ..
     log "Cleaning up ${GDB}"